How to Install a Battery Boot Tool Attachment

The FallTech For Tools™ Battery Boot Tool Attachment is used to attach the FallTech For Tools™ Tool Lanyards, for use with FallTech® Wrist Attachments and Tool Anchors.
The FallTech For Tools™ Battery Boot Tool Attachment is designed to be used as a component in a dropped object prevention program. The tool tethering system is an assembly of components and subsystems to arrest a tool from an accidental drop. The system typically consists of tool attachment, a tool tether, and a tool anchor. See product labels for maximum load capacity and maximum allowable tether length.
The FallTech For Tools™ Battery Boot Tool Attachment is designed for use by a single battery powered power tool with a combined weight no greater than 6 lb (2.7kg) or based on the rating of the Tool Tether. DO NOT use the Battery Boot Tool Attachment if it interferes with the proper use of the accessory or tool.
Installation:
Inspect the Battery Boot Tool Attachment thoroughly before attaching it to the to the tool for damage or wear. Inspect the webbing, hook and loop straps, looped ends, and stitches for cuts, fraying, and signs of damage to the materials from excessive wear or abrasion. If any of these
conditions exist, remove from service.
Ensure the battery powered power tool and Battery Boot Tool Attachment is clean and free of oil, grease, or debris, which could prevent adequate attachment onto the tool. The Battery Boot should be placed away from the functional parts of the tool. See the figures below for the installation steps.
Undo the hook and loop straps that secure the battery powered power tool into the Battery Boot Tool Attachment.
Place the battery powered power tool into the Battery Boot Tool Attachment with the rear of the tool facing the D-ring on the back of the Battery Boot Tool Attachment.
Pull the lower hook and loop strap first to size the Battery Boot Tool Attachment and pull the top hook and loop strap to fully secure it into the Battery Boot Tool Attachment.
Attach your choice of FallTech tool tether to the Battery Boot Tool Attachment.
/ / / / This video is for demonstration purposes only. CONSULT THE USER MANUAL FOR MORE INFORMATION.
__________________________________________________
// FallTech® product pages:
falltech.com/product/5401A1
// Facebook
/ falltech
// Instagram
/ falltechsafety
// LinkedIn
/ falltech
@FallTech #falltech #fallprotection #droppedobjectprevention #tooltethers #toolattachments