How to install a bidet sprayer in minutes

[@Kaetrin]

Hi Bill. I was interested in getting one of these but as I'm not as handy as you I asked a plumber for a quote. He said the OTR has said "a ‘high hazard’ RPZ backflow device must be installed upstream of the hose connection. The device must comply with AS/NZS 2845.1 or AS 2845.2" in (at least) South Australia where I am. Do you have the same rules where you are? I think it's not really an option for us to have an RPZ backflow device installed now alas.

[@billshowto]

That’s correct, an rpz should be installed. Not cheap to get someone to do it for you though 👍

[@Kaetrin]

@@billshowto I don' t think it is something I can do myself! I'm a little unclear as to why the RPZ from the toilet can't be used given that the sprayer attaches to the same outlet but I gather that's not allowed? How did you address it at your place?

[@billshowto]

Luckily for me my brother is a plumber👍

[@ralphfryer7337]

An RPZ or regulated plumbing work, "MUST" be installed as per the National Construction Code (NCC) Plumbing Regs and AS/NZ3500 and as such must be installed by a plumber. Im certain your brother who is a plumber wouldve told you that? Nonetheless neat but illegal work@@billshowto

[@sarchlalaith8836]

Your clarity is why when I do DIY this is my go to channel.

[@anonracer95]

Thank you very much for this video, this is something that every young person should learn how to do

[@XxCherrybomb666xX]

Funnily enough I just bought of one these and need help installing it, perfect timing, thank you!

[@billshowto]

You’re very welcome 👍

[@sal7501]

That ‘rag’ is actually my guest hand towel lol. Thanks Bill 👍🏽

[@bobsharma652]

I like this video out of so many I watched to learn DiY bidet sprayer DiY instillation, I like it for clearer instructions, very detailed visuals of all washers👍👍

[@stupac10]

Bill!! Not a silly design having it hidden in the tank that’s the best place for it! ❤❤

[@OneIdeaTooMany]

Somehow I can see people installing these just to make cleaning the bathroom easier.

[@jxdet6072]

I was just thinking this.

[@calvink295]

@@jxdet6072 Once you start, you can't stop! :)

[@kwamedotcom3696]

I have one of these and recommend. Nice clean bum!

[@celynjones4958]

Excellent tutorial. These are standard throughout much of Asia, I cannot go back to tissue only. BTW I would use the flow reducer to save any uncomfortable surprises. Cheers Bill as always.

[@bobsharma652]

Hi, “uncomfortable surprises”, what you meant by this? Do you mean sudden pressure of spray water bursting? I do have the problem that the thumb press is hard even after using the flow controller valve and after reducing the water flow/water pressure from the water flow pin. So what can be done to make the thumb press softer/easier to press?

[@MRK281]

Thks for another good tip, now i am much more confident to drill on tiles

[@santillbrezon2161]

I really like your channel Bill, its very helpful, thanks.👍

[@billshowto]

Glad you’re enjoying the videos 👍

[@rodneyhuffton9155]

Thanks Bill. Your a real inspiration.

[@bobsharma652]

@6:32 part you talking about “flow controller” but you didn’t use it, instead you used an ordinary valve why? What difference does it make between using a flow controller vs a normal valve? I’m asking this because when I used the same product I installed here in Australia in my house I found it very hard to press the sprayer to release the water. I changed (reduced) the water pressure by turning the T-valve handle (pin) but still I found it’s quite hard to press to spray the water whereas back home in my home country it was much softer press to release the water. So with Bidet handheld sprayer I tried by using both the “flow controller valve” at one time and other time using the ordinary valve but either way it is still hard to press using the thumb. I can press it but at the very start it is hard to press and suddenly spray water bursts rather than slowly increasing the force of spray water. So could you please suggest how to get rid of this “hard to press bidet sprayer “ problem. I tried changing the water pressure (water flow) and it improved slightly but still it’s quite hard to press. Then I tried using “flow controller valve” and ordinary valve but still problem didn’t resolve, then I tried changing from Bunnings the bidet sprayer chrome finish (metal/ heavier) with bidet sprayer white finish (plastic/lighter) but still the problem doesn’t resolve. So could you please suggest what can be done, if any option, please

[@jeoffer]

Good and clear explanation.

[@creatrix13]

AWESOME I never knew these existed: was getting sticker shock pricing out bidet toilets... this is the answer. cheers

[@iforgotmyusernameagn]

Happy New Year Bill! This is great. Definitely would solve any future toilet paper crisis

[@billshowto]

Lol, hopefully no more shortages 👍

[@allangoods8878]

That’s a great video. I’m an apprentice plumber and have to fit some of these later in the week

[@billshowto]

This will make your job much easier 👍👍👍

[@411Adil]

local mosque's should have this, local schools should have this, HOSPITALS should have this!. Right after a install mine, I will start a revoloution!

[@anonracer95]

what are you on about mate? These are pretty much standard fare in Asia, or at least in the middle east where every house has this installed. Where are you living now where these things aren't commonplace?

[@411Adil]

@anonracer95 IN THE WEST! So I guess the west was never the "1st world"....

[@jameselias9399]

Was a backflow prevention RPZ installed at the fixture and at the meter. Australian plumbing standards require this to prevent contamination.

[@george.pahali]

Great video. That empty toilet paper roll was doing my head in

[@senorasheikh8018]

This is very useful for cleaning ourselves all muslim propels use this.

[@Motivational_Flavio]

The plumber I called is telling I need a backflow valve and will be fined if not installed it himself, is this real?

[@jameselias9399]

This is true requires a RPZ back flow prevention device

[@asmatalichangezi7733]

Hi, before drill the tiles, how to make sure that there is no water pipe behind tiles which may not damage by our drill?

[@senorasheikh8018]

We install it right side because we use our left hand for cleaning ourself

[@billshowto]

In this case the left side was the only option 👍

[@michellestavrakis6571]

Which Bidet is that, I see there are two types at Bunnings like the one you installed

[@paulduhig7131]

Hell's Bells I've got the stupid toilet design otherwise this would have been my next project. Top videos nevertheless sir

[@billshowto]

👍

[@ibrahimtaleb5214]

Salam alaykom bill. Please remember to use a pressure reduction valve, which is adjustable to reduce water pressure going to the handpiece. Install one on the wall either before or after the stop valve, then connect the flexible hose to that. You can reduce water pressure down from, say, 1200kpa to as low as 20kpa. It also stops pressure surge and pressure creep. Any plumbing suppliers should have them in store and ask for half-inch bsp, which will fit the thread you need. Keep up the great work.

[@christinewallace4209]

Well done thank you

[@michelebridge1126]

I was wondering if you have a video of a hack to clean the bathtub? I’m sick and tired of buying different cleaners and nothing is really good

[@BRUISER1]

Mate, these things always end up leaking. Whether it's a cheap one or not, they leak. I have to turn the valve off/on to use it.

[@alanmooney]

Great video Bill, I love your work, what's a bidet for? Can you explain!

[@billshowto]

It’s used to wash thoroughly after doing your business in the toilet. Using water and toilet paper is much more effective and hygienic 👍

[@Ss-sl3gh]

Thanks Bill. Does the installation require a licensed plumber?

[@billshowto]

No plumber needed as It’s an existing connection 👍

[@photosblossomsau1624]

Mine is hidden inside the tank just same as yours. So now I bought this shit and idk what to do! You think still possible to install with the water pipe hidden inside the tank?

[@mr.z541]

Bill, I would love to fit one of these, however my only concern is the thing failing at any point and possibly flooding the whole house, especially upstairs.

[@billshowto]

That is a possibility, however the manufacturers always state that the shut off valve should be switched off when not in use.👍

[@commanderkeen3787]

@@billshowto but if the toilet is connected to the same shut off valve (which is very common) then is it still a good idea to keep turning the valve on and off with each use?

[@billshowto]

@@commanderkeen3787 using a dual shut off valve will have a separate switch for each valve👍

[@commanderkeen3787]

@@billshowto thanks! What kind of dual shut off valve would you recommend using?

[@billshowto]

Any dual shut off valve that has a control switch for each valve. This way you can open/close each one separately 👍

[@chriscornwall5101]

What would a plumber charge to supply and install these? I have a quote for $660 for two of them, is that reasonable?

[@bestbudsourchannel4807]

I wish my toilet had the water supply in the back of it. That looks so much nicer than the hoses sticking out of the wall

[@CJ-ki4qw]

A Burst bidet flooded my friend's house and he ended up with a hefty insurance claim. Bill, do you think this is safer to use here in AUS?

[@billshowto]

All manufacturers advise to shut the water supply off when not in use 👍

[@welshmanjasonpatrick8607]

did professor job broken door i would did it save money

[@bobsharma652]

How to avoid this ‘very hard to press’ the spray and water bursts suddenly. How to solve this problem as seen in this video: kzbin.infoUyM6Pbi3hX8?si=itDtRQE8Z8A0KECL

[@CuriouslyUndercover]

That’s not a rag mate. Looks like one of my Egyptian cotton Sheridan hand towels. Your wife will be mad 😅

[@rolamerheb4650]

Mine is already installed but always have the problem of leaking water 😟😟

[@billshowto]

Most people who have issues with it leaking don’t switch off the water supply when it’s not in use. You can try and replace the seals in the mean time 👍

[@jameselias9399]

You need a RPZ back-flow prevention device installed by a licensed plumber

[@MikaComments]

👍

[@ryanlaffan7064]

Would that be only cold water on your bum though?

[@jackdawg4579]

no idea how to use a bidet, but that looks like an awful lot of freezing cold water to shoot up ya clacker!

[@bobsharma652]

It’s good and clean and fresh, no more smelly sticky crusty pooye dirty bum, feels more like a human being

[@addiejonez]

Don’t you need special permission to have this installed due to the flow back into the mains and contaminating drinking water.

[@mr.z541]

Yeah, I've read about this too that it could be an issue, or is this just scare tactics?

[@craigalexp]

You can get a backflow preventer. Their cheap.

[@billshowto]

Don’t need special permission, depending on where you live they may need to have a back flow preventer installed to prevent the possibility of contamination. They are very easy to install , if you want to see a video on how this is done let me know 👍

[@jacksunny2002]

@@billshowto Yes please. Some of us have this and would be great to see an installation of back flow prevention. Also, I think this Evakare unit already comes preinstalled.

[@DarkMatter1919]

You didn't mention that the centre punch cracks the whole tile.

[@Peter-zv4dx]

You said” make sure you put screw one at a time” lucky cos I normally put them 2 at a time. 😂😂😂

[@billshowto]

Lol I meant to say, tighten each screw bit by bit alternating between the two. At least you were listening 👍👍👍