How to install a Digital Stepper Motor fuel pressure gauge by Autometer, and fix my oil gauge line!

  Рет қаралды 8,336

Fast Monty's Garage

Fast Monty's Garage

Күн бұрын

Пікірлер: 48
@FastMonty
@FastMonty 2 жыл бұрын
Be sure to subscribe for more, click here; kzbin.info Then get your FMG hat here; three color combos www.etsy.com/shop/fastmontysgarage
@isingthebodyelectric1041
@isingthebodyelectric1041 2 жыл бұрын
You can use a depinning tool to carefully remove the wires from a connector. This can be handy when you want to minimize the size of the hole you drill to pass through a wiring harness. Just be sure to take notes and pictures of the wire arrangement before disassembly.
@FastMonty
@FastMonty 2 жыл бұрын
Ohhh man, that's freakin brilliant! I love it. Agreed, take lots of pics, and notes before taking the pins out. But, fantastic idea, thanks for sharing!
@Matthew-21_22
@Matthew-21_22 2 жыл бұрын
Mike, one thing always consistent about you that I've noticed is your passion along with doing and buying things first class. You never skimp or cut corners. As always, keep up your excellent work, Tom.
@FastMonty
@FastMonty 2 жыл бұрын
Thanks Tom! That means a lot!
@riskytime
@riskytime 2 жыл бұрын
what a man thank you sir these gauge install walkthroughs are A1 top notch.
@FastMonty
@FastMonty 2 жыл бұрын
Thanks brother! Glad they help. See ya!
@thisisyourcaptainspeaking2259
@thisisyourcaptainspeaking2259 2 жыл бұрын
In the days prior to plastic tubing, we used to use soft copper refrigerant tubing for our mechanical oil pressure gauges.
@FastMonty
@FastMonty 2 жыл бұрын
Yup, Autometer sells that too... but, bend it too much and it'll break. The AN line is the way to go, in my opinion. :) Oh, and I sent the gauge back to get the matching chrome bezel... it was a whopping $25. How cool is that? Thanks!
@markfeuerherdt2338
@markfeuerherdt2338 6 ай бұрын
Where can you get the AN line at? Thanks! Great videos😊
@thisisyourcaptainspeaking2259
@thisisyourcaptainspeaking2259 6 ай бұрын
@@markfeuerherdt2338 Might check the autometer catalog.
@Rick-O-Shay60
@Rick-O-Shay60 2 жыл бұрын
I'm relieved you took out that mechanical fuel gauge Mike. You know what I'd do on that mismatched gauge bezel, is paint them all flat black.
@FastMonty
@FastMonty 2 жыл бұрын
Thanks Rickey... I am too. Ohhhh very tempting option on the bezel. Love it!
@rogjackson
@rogjackson 2 жыл бұрын
I think the bezel looks fine. I would not change it. One's eye is pulled toward the guage needle generally and does not notice the bezel distinction. Nice work!
@FastMonty
@FastMonty 2 жыл бұрын
Thanks Roger... it'll take some time for me to either get used to it, or change it back to Chrome. Ha, ha... We shall see! Thanks again!
@thisisyourcaptainspeaking2259
@thisisyourcaptainspeaking2259 2 жыл бұрын
I like them all to match but even when they don't, eventually it doesn't bother me, lol.
@FastMonty
@FastMonty 2 жыл бұрын
@@thisisyourcaptainspeaking2259 Agreed! I got it changed... it was a whopping $25. Love it!
@riskytime
@riskytime 2 жыл бұрын
@@FastMonty Nice ride brother. I have my sound output through the 1800-watt, eight-speaker shop system I built out here, and when you turned the key it really took me by surprise in a good way. Glad you got your bezel matched and didn't settle for less. When you attend to every little detail like that, it is inspiring to a lot of us dudes in a very disciplined, admirable way. Thank you, sir.
@FastMonty
@FastMonty 2 жыл бұрын
@@riskytime Thanks Brother! Yeah, matching the bezel was a good call... and, it was only $25 to do so. Thanks for the comment!
@rbatts9163
@rbatts9163 2 жыл бұрын
Makes me want to buy a sending unit for my digital Dakota gauges . Nice to have that reading for EFI for sure . Especially with sniper internal Reg 😝
@FastMonty
@FastMonty 2 жыл бұрын
Yeah! Exactly why I went there... do it! Thanks for the comment.
@thedobermangang3503
@thedobermangang3503 Жыл бұрын
My buddy I want to hear the GTO run the one you got sitting behind you and a video on that engine you got in there I will be waiting..
@FastMonty
@FastMonty Жыл бұрын
Easy, check out my two most recent videos.
@nursecuenca
@nursecuenca Жыл бұрын
Do you run a 100 micron coarse fuel filter on your car? And what brand fuel filter do you use?
@FastMonty
@FastMonty Жыл бұрын
Good question... I have an in tank pump, with a 100 micron filter, running to a FiTech 10 micron filter. If you're still carbureted 100 micron will work fine. Hope that helps!
@2423aj
@2423aj 2 жыл бұрын
Can a fuel gauge be put on 01 tahoe wired through instrument cluster
@FastMonty
@FastMonty 2 жыл бұрын
Hmmm, the gauge can be installed on any vehicle. But, I'm not sure if it'll fit in the existing cluster. Let us know how it works out.
@2423aj
@2423aj 2 жыл бұрын
@@FastMonty I just wanna run wire to the cluster instead of fuel pump so I won’t have to drop tank is their away I can hook the guage up without dropping my tank
@2423aj
@2423aj 2 жыл бұрын
@@FastMonty how can I wire my fuel gauge on my 01 Tahoe without dropping the tank
@FastMonty
@FastMonty 2 жыл бұрын
@@2423aj Good question... I'm pretty sure you HAVE TO use the sending unit included with the gauge. Where you mount that sending unit is up to you... Ideally, I'd mount it as close to the point of use as possible, as I did on my Throttle Body. Let me know how it goes...
@2423aj
@2423aj 2 жыл бұрын
@@FastMonty really didn’t want to do the tank on 01 Tahoe to connect to sending unit. Is there another way to wire a fuel gage without connecting the fuel pump
@junechris
@junechris 2 жыл бұрын
Like your channel man, so where are u from? I'm actually in Hollywood, in between Ft Lauderdale and Miami. I'm gonna finally put my glow shift coolant temp, boost vacuum, wideband air fuel ratio, and black and blue digital tachometer/W LED in May and I got my 5 speed manual, put in and Limited slip differential, fidanza lightweight flywheel and new seats from the donor car, which look new, no rips, etc.
@FastMonty
@FastMonty 2 жыл бұрын
Awesome! I was just there... well, Pompano Beach. I live in San Diego. Congrats on all of your fun new toys! Thanks for watching! Check out my drag racing video... complete rookie. Ha, ha... see ya!
@junechris
@junechris 2 жыл бұрын
@@FastMonty Yeah, I saw your first time video dragging. I was thinking of upgrading my rear taillights like what u did on the GTO. Possibly also the LED with the blinkers, where the blinker light slides all the way across also, like the new cars.
@FastMonty
@FastMonty 2 жыл бұрын
@@junechris Glad I can inspire some cool ideas... get it dun! See ya!
@Prestige.Worldwide
@Prestige.Worldwide 2 жыл бұрын
Hi Mike, amazing GTO with an amazing story to go along with it. What steering wheel and cap setup do you have there? I have an old tired steering wheel in my 69 GTO and have been looking through all the options on the net. Also, what wheel and tire size you running? Did you make any modifications to make them fit? I think those wheels are US Mags U109 and they come in 17” and 18” i couldnt find bigger. Great job man, the car is bad ass.
@FastMonty
@FastMonty 2 жыл бұрын
Welcome to the channel! Great questions... yeah, my original Formula steering wheel was beyond repair... welp, I didn't want to spend $1200 having someone fix it. So, I bought a Grant Steering wheel. I don't know if they make mine anymore, but they have some good stuff. The tires are 295/30 - 20 and 255/35 - 19. With careful measuring you can go to 305 and 265, respectively, with ZERO or very little modification. (I slightly trimmed the inner fender lip on the rears) My wheels are US Mag Bandits, but they're custom 3 piece wheels they don't make anymore. The closet are their two piece version USMag US304's. You were looking at their low cost cast versions. Let me know how it goes!
@SidewaysTA
@SidewaysTA 2 жыл бұрын
Great job Mike. I'd investigate swapping the bezels yourself. Have no idea if it can be done but if it can I'm sure you could handle it.
@FastMonty
@FastMonty 2 жыл бұрын
You know I will! HA, ha... Thanks for the comment!
@lemmykilmister873
@lemmykilmister873 2 жыл бұрын
🤔
@FastMonty
@FastMonty 2 жыл бұрын
LOL what?
How to install Mechanical Gauges by Autometer, Part 1 - Water Temperature
18:11
How to install an Autometer "Mechanical" Fuel Pressure Gauge, Part 3
24:18
Fast Monty's Garage
Рет қаралды 22 М.
Арыстанның айқасы, Тәуіржанның шайқасы!
25:51
QosLike / ҚосЛайк / Косылайық
Рет қаралды 700 М.
Try this prank with your friends 😂 @karina-kola
00:18
Andrey Grechka
Рет қаралды 9 МЛН
Beat Ronaldo, Win $1,000,000
22:45
MrBeast
Рет қаралды 158 МЛН
Looking inside an engine during cold start (-30 degrees)
15:30
Garage 54
Рет қаралды 4,2 МЛН
The TRUTH about PRE-FILLING Oil Filters... ACTUAL SCIENCE
39:36
Freedom Worx
Рет қаралды 608 М.
Making Mismatched Fuel Sender and Gauge Work Using Meter Match
8:51
This Week With Cars
Рет қаралды 37 М.
How to install gauges by Autometer, Part 2 - Mechanical Oil Pressure
12:50
Fast Monty's Garage
Рет қаралды 60 М.
How to SUPER CLEAN your Engine Bay
21:58
ChrisFix
Рет қаралды 52 МЛН
A DETAILED overview of KNOCK and PRE-IGNITION - BOOST SCHOOL #7
16:14
driving 4 answers
Рет қаралды 646 М.
Richard Hammond On Life Without The Grand Tour
34:01
DRIVETRIBE
Рет қаралды 472 М.
Installing and Tuning a M/E Wagner Dual Flow PCV Valve, for your Musclecar.
16:36
Арыстанның айқасы, Тәуіржанның шайқасы!
25:51
QosLike / ҚосЛайк / Косылайық
Рет қаралды 700 М.