How to install a Fender Eliminator and Undertail on a 2020 Yamaha MT-03 by TST Industries

Streamline the tail section of your new Yamaha MT-03 with our easy to install Fender Eliminator and Undertail Kit. Most fender eliminators leave the bottom of the tail area looking incomplete, but ours smooths everything out making it look the way it was meant to. This is one of the sexiest and most functional fender eliminator and undertail kits currently available for the 2020 MT-03!
Get this Fender Eliminator here: bit.ly/2ZCdR61
Yamaha R3 Fender Eliminator Comparison: • 2015+ Yamaha R3 Fender...
TST Elite-1 Fender Eliminator Product Feature: • 2015+ Yamaha R3 Undert...
Installation shown on the 2015 model year: • Part 1: How to install...
Installation shown on the 2019 model year: • How to install a Fende...
Make sure to subscribe here: bit.ly/1jq2ZrN
Follow us on Facebook here: on. 1nuTjlF
Follow us on Instagram here: / tstindustries
Follow us on Twitter here: / tstindustries
When you remove the OEM fender from your new MT-03, you end up with an unrefined look in the tail area, even if you install a traditional fender eliminator. We took the necessary time to develop a fender elimination kit that would be unsurpassed in fit, function, style, and refinement. Our end result is the sexiest and most functional fender eliminator and undertail system available for the MT-03. Our undertail is the only one of its kind in that it perfectly matches the lines of the bike down to the color and texture of the bike components. It provides a mounting base for the license plate bracket and closes off the trunk area from water and debris. Most fender eliminators leave the bottom of the tail area looking incomplete, but ours smooths everything out making it look the way it was meant to. While other fender eliminators are bulky and expensive, ours is designed to be fully functional with minimal girth and weight. You don't even have to worry about the price! This system includes more for less and is by far the best bang for your buck.
We always design our products with the hope that customers think, "this is how the bike is meant to look, not how the factory released it." This system is no exception, and we believe we've accomplished that response!

[@cheeseballs3825]

Thank you guys so very much! I just installed the crash protection, fender eliminator, and integrated taillight in a couple hours. These videos made it super easy. I've never worked on a bike before. Got everything back together looking factory fresh. Couldn't have done it without you!

[@TSTindustries]

Thanks for the love and support and we're glad to help!

[@consciouscookiemonster8364]

I was stuck between this and the Yoshimura but after watching this video I can see you guys truly make quality products with an awesome selection for such a new bike

[@TSTindustries]

We're glad you like our products! You can also check out our Fender Eliminator Comparison video where we highlight all the pros and cons of the most popular brand options on the market for the MT-03 & R3. You can view that video here: kzbin.info/www/bejne/j5eYqpebmbpsr5Y

[@Mergjan88]

This is awesome wow. I'm going to be watching this a few times before I try it. Thank you for taking the time do show this step by step. I wish I could give this 2 thumps up!

[@TSTindustries]

Glad it was helpful!

[@bodied93toy66]

I just ordered my fender delete and plate bracket last night, I have a 2015 R3, this kit is going on the 2023 MT-03 I bought last Friday., it will be here next Wednesday.

[@ElectricGorilla85]

Gee! That setup looks familiar... Maybe because I have the same bike and same fender eliminator! Worked great and I just left the license plate light off since I don't ride at night. May install later though. Can't wait to see all the fun parts you'll fab for this model bike.

[@TSTindustries]

Awesome.

[@Tyke21]

Just a heads up, some jurisdictions will fail your inspection and police can pull you over and fine you for not having a license plate light……..day or night. North America seems to be pretty slack when it comes to safety and quality control though, mostly the UK and Europe where it can be an issue.

[@ElectricGorilla85]

@@Tyke21 that's a problem for the new owner. Sold for a 2020 triumph speed twin. Fendor eliminator on there too but OEM light still attached

[@rgrunity3598]

Finally a video!

[@TSTindustries]

What do you mean?

[@rgrunity3598]

Been waiting to see your videos on the MT03 that’s all!

[@TSTindustries]

@@rgrunity3598 ah, i see

[@RulgertGhostalker]

still saving for the down on my MT-03 .... but the first thing i am going to get for it is the TST HyperPack Bundle, for sure.

[@TSTindustries]

We love to hear that!

[@petergeanacopulos5327]

My parts came before the RMV sent the dealership my plates lol. Guess ill just look at them like a kid at Christmas.

[@SolarEclips86]

Any video on how to put on the factory blinkers. I can’t fine it for some reason

[@adityadatar1]

The installation is straight forward and great quality! I drilled a hole in the plastic in the wrong spot tho. Any suggestions how to fill it? Thank you

[@TSTindustries]

A black plastic push pin fastener will do the job

[@Sum1t54]

If I attach the adjustment kit then do I need to loosen and tighten the bolts to adjust the angle of the plate? Or can I just push it back and forth?

[@patricksutherland6878]

I cant find it anywhere has anyone tried to fit these to a 2019 international mt03 and what was the fitment like

[@RaytheonNublinski]

I want the fender eliminator kit for my FZ09. But I already bought your blockout plates for the turn signals. Is there a way to get everything but the blackout plates?

[@TSTindustries]

Please message our customer support through our website. I think they will be able to work something out with you.

[@gardy4133]

A lot of stuff sold out on website for 2019 Mt09, when will you guys be stacking up?

[@TSTindustries]

We are going as fast as we can. I can assure you that there is a lot of work going into keeping stock levels. The unfortunate reality is that at the present we are experiencing shortages in materials and components. Our suppliers have slowed down and the transportation industry is also struggling so we are getting fewer parts slower. We are doing all we can to expedite all these processes but there is little we can do. Please be patient and give us some time. We will do our best to get the parts back in stock. In the meantime you can sign up for an in-stock notification email for each product you are interested in.

[@steveman1982]

Whenever I see MT-03 I think of a 660cc single (my first bike!). I don't think it was available in the US.

[@TSTindustries]

What bike was that?

[@maxiduldulao8510]

Can you make a video for a low mount license plate holder for the MT 03

[@TSTindustries]

Unfortunately, we do not offer that kit so we will not be making a video at this time.

[@maxiduldulao8510]

@@TSTindustries oh okay! I really hope it would be available in the future just like the MT 09

[@JohnSnow-um4jq]

Just ordered a set. It’ll be my first project on my MT-03. Are the posi-taps included? Thanks

[@TSTindustries]

Yes they are as long as you order the license plate light.

[@JohnSnow-um4jq]

@@TSTindustries last thing im wondering, as I am supposed to receive my package today. Do I have to drill a large hole on the fender eliminator to fit my oem signal’s plug so it can reach the harness?

[@BigHemiNJ]

what are those locking nuts called for the license plate wires?

[@TSTindustries]

Posi tap connectors by posi-products

[@1683clifton]

Sets for the 2022 model with the grey plastics and the cyan rims?

[@TSTindustries]

I don't understand your request, or question, or whatever this statement is.

[@christopherelisterio6769]

Nice bike. But its tail is too long for me, it's almost parallel of the rear tire. But it doesn't mean i don't like it.☺☺😊

[@irheinzburgos4295]

I hope tst industries ships on Philippines

[@TSTindustries]

I'm sorry but at this time we do not ship to that location.

[@irheinzburgos4295]

TSTindustries will it be possible? A lot of Filipinos wants original TSTindustries because the fake sucks 👍🏻

[@commanderstud2417]

How big a hole to be drilled for the wiring for the blinkers if we have decided to use the stock ones?

[@TSTindustries]

For that i recommend removing the connectors from the wiring, passing the wires through and then reinstalling connectors. This way you can get away with a 1/4-3/8 inch hole. If you want to pass the connector through the hole then ot will have to be much larger. On the prder of 5/8", but a bit smaller if ypu can make it rectangular with a dremel or file.

[@commanderstud2417]

@@TSTindustries ok cool!!! I got everything on and zipped up. Your video helped out tremendously! Thank you for your help. I’d recommend this kit to anyone that’s wants simple and high quality.

[@gravy9612]

just bought the kit so i aslo need to buy the light? or is it coming with it ?

[@gravy9612]

do i also need to buy the rear lights to fit it or will the stock fit for now ?

[@TSTindustries]

@@gravy9612 are you asking about the tail light? The fender eliminator fits independently of the tail light so it does not matter if you have the stock one or aftermarket. If you are asking about the license plate light then if you want to have your license plate illuminated then you have to buy an appropriate license plate light. The stock one does not fit with the fender eliminator.

[@cheenuma9164]

How to find the flasher relay of the mt-03

[@TSTindustries]

Its around the battery area but even if you find it there are no aftetmarket replacements

[@OscarRodriguez-wh6xl]

Would I be able to put a thicker rim and tire on this bike

[@TSTindustries]

Technically it is possible but you would be spending a lot of money to destroy the dynamics of this bike.

[@benzgarcia4474]

how to lower the shock absorber and front forks of mt-03 yamaha??🤔🤔 #TSTindustries

[@TSTindustries]

You can lower and raise the forks in the triplle clamps to your likinig (within the range where that actually can be done). The shock is not height adjustable. You can at most change preload on the shock and that is it.

[@henrytischbein155]

Can you use the oem license plate light

[@Voltomess]

I'm pretty sure you can but they won't tell you that

[@tonysilva8222]

What about oem turn signals how do I run the wires from the fender eliminator has no holes

[@TSTindustries]

We went over that at around 14:00 timestamp. For this particular bike the OEM signal connectors are HUGE! if you are going to pass those through the undertail we recommend de-pinning the plugs so you can drill a small hole in the undertail, and then re-pinning them. Otherwise you will have to drill a hole at least 5/8" in diameter and that pretty much destroys the clean look we were going for with the undertail.

[@tonysilva8222]

TSTindustries thank you

[@BrownToast261]

In terms of a 2016 mt-03, is this suitable

[@TSTindustries]

I can't say...we do not have a pre-2020 model here in the USA

[@Voltomess]

Kinda scary to puncture those cables for plate light. Why you just don't make a plug that goes to the bikes plug and that's all, nice and easy plug and play.

[@TSTindustries]

Because this is a universal plate light for everyone to use. If we begin making bike specific connectors for our plate light, the cost will go up.

[@garydunbar6686]

How would I wire in the stock turn signal wires? I got the kit but no idea how to get the wires through.....

[@TSTindustries]

That will require drilling a larger hole in the undertail that comes with the kit because the size of the signal connectors is so large. Alternatively you can unpun the connector, pass wires through and repin it. Those connectors are difficult to unpin though. There is another option of cutting signal wires mid way, feeding through undertail and then re-wiring them together.

[@garydunbar6686]

@TSTindustries thank you guys so much for the quick response!!!!! It should be a 3/8 or 3/4 bit for anyone wondering!

[@TSTindustries]

@@garydunbar6686 if you have a dremel you can make a rectangular hole instead of larger round hole

[@TSTindustries]

@@garydunbar6686 sure thing! Glad i could help you

[@haichielaagan31]

How to order please or how to buy?

[@TSTindustries]

Follow the link in the description of the vodeo or type TSTindustries.com into a browser.

[@user-ky2fu7oj6p]

Will it work on a greek license plate?

[@TSTindustries]

We do not know. Our standard bracket is designed for U.S. plates and fits a hole spacing of 5 to 6.1 inches with 5mm hardware, while the adjustable bracket fits a hole spacing of 5.2 to 6.29 inches with 5mm hardware.

[@Taitea_____]

Do ship to canada?

[@TSTindustries]

every day

[@JP01121]

How to order

[@TSTindustries]

Link in the description. -TST

[@gilohana1174]

It is suitable for MT 03 2019 ???

[@gilohana1174]

????

[@TSTindustries]

We did not receive the MT-03 in the US until 2020 so we cannot confirm or deny it.

[@vdominguez355]

Didn’t know they had an 03 model?

[@TSTindustries]

They have had it for years overseas just in an older design. The 2020 updated model is what they are importing here now.

[@HoboTheAudiophile]

Do you ship to Turkey?

[@TSTindustries]

We do

[@HoboTheAudiophile]

@@TSTindustries Waiting for your hyperpack bundle to get in the stock.

[@unknownsoldier6367]

See i would 100% buy this if it were legal up here in the land of maple syrup eh.

[@TSTindustries]

We completely understand.

[@velcrodreams178]

Nice job but waste of money

[@TSTindustries]

That's subjective.

[@velcrodreams178]

Agreed