One step you left out, there are alignment instructions regarding the two piece hub. I’m holding one in hand right now. They MUST phase properly or it will damage while torquing or motor use.
@saltypredator505 Жыл бұрын
Hi Prop shop Inc My kit did not come with the o-ring. Can you please advise what size is the o ring?
@SBTipper3 жыл бұрын
Do you know the size for the o ring
@osiyooverland4 жыл бұрын
so when you put on the spacer before you put the nut on, the spacer barely touches the spines. so that is normal? seems like it should go on a little further. I am in the middle of changing props and hub kits and thats my only concern.
@jamespetty95456 жыл бұрын
You are the only person that talks about the o-ring
@Maxxifull6 жыл бұрын
The instructions shows an o-ring, but my harware did not include one. I did add a o-ring, it just reduce and softens the back and forth play in the prop.
@saltypredator505 Жыл бұрын
Hey guys. Do you know what size is the o ring?
@saltypredator505 Жыл бұрын
@@Maxxifull do you know what size is the oring?
@Maxxifull Жыл бұрын
@@saltypredator505Sorry, can't remember. Take the hub/prop with you to the harware store and fit/choose the right size there.
@ericlarson639 ай бұрын
Fantastico!
@medgo1344 жыл бұрын
just ordered a flo-torque 2 from propshop inc, it came in canada in 2 days, very good product, fast delivery, i will bookmark the site for sure and order again. Just a suggestion, please make more videos on how to install these on volvo xs as well, the instructions in the box are not very clear and they are general for all 1,2,3,4 torq systems.
@andrewmason4610 Жыл бұрын
I love you. Seemed like alot of play after i tightened it and wasnt sure if it was normal
@ericlarson639 ай бұрын
Mine has what I would call a crazy amount of play front to back, not side to side. It does not wobble. Like 1/4 inch of sliding back and forth! That is normal?
@TBrownRecords4 жыл бұрын
You made a nice video
@jaymz00745 жыл бұрын
How much grease for the shaft? Getting ready to do mine. Couldn't really see it on yours.
@kristopherbuchanan9745 жыл бұрын
Is it obvious if the hub itself is bad? Mine doesn't appear broken but I wasn't sure if they actually break or just round off....i am not familiar with these styles.
@stellamolloy89074 жыл бұрын
I do not want to find out, but it looks like it's designed to round off the 4 corners of both sleeve sections unless the little fingers break off. Wither way it should be obvious what happened.
@gholdsfishing3144 Жыл бұрын
Can i put a flo torq hub in a yamaha prop and put it on my mercury?
@breakingrocks63882 жыл бұрын
Is there no need to lube that o-ring?
@ChattanoogaHasDogs3 жыл бұрын
Best info for changing the hub. Thanks
@maximilianorocca5164 Жыл бұрын
Is it normal that little play that you have? Do you also have some play in the axial?
@deere33215 жыл бұрын
I have a flo torq ii on a Yamaha f70. It is extremely noisy at idle.
@vlogcity11113 жыл бұрын
What do you mean noisy? Is your shift linkage adjusted properly