How to install a Johnson Controls SNE2200, replacing of an NAE55, start to finish, mistakes and all

Once I got into the SNE I updated the name and the IP address for the device but didn’t point it to the server. You will not be able to point it to the server if it is not directly connected to a network that has access to the server. The SNE will ask for the login information to the server and will give you an error if it can’t see it.
A Johnson Controls SNE is set as its default to be a site director and must be demoted by pairing it with a server if it isn’t used as one. It MUST be able to see the site director in order to pair it where it will populate on your network tree.
Once you get the device configured with the name and IP address that is in your SCT database connect the SNE to your network. Once the device is on a network capable of seeing the server, try downloading it through your network. If you still cannot load the device from your laptop, try downloading the database from your server instead.
systemcontrolt...
My Website: systemcontrolte...
Facebook: / systemcontroltech
NETGEAR 5-Port Gigabit Ethernet Unmanaged Switch amzn.to/30d9DST
Cable Matters 5-Pack Snagless Short Cat6 Ethernet Cable amzn.to/2zbLIbk
Onicon Controller: amzn.to/3eYEyXh
Onicon Insertion Flow Meter: amzn.to/3eMQDOU
Support the channel by becoming a Patreon: / systemcontroltech
Here are some of the things I keep in my tool bag.
Backpack: amzn.to/2tDnYsC
My screwdriver: amzn.to/2uPyIDV
Small fuse puller: amzn.to/2uPIdDk
Combination fuse puller: amzn.to/2vB0dPf
Adjustable wrench: amzn.to/2us3akS
USB to Serial converter: amzn.to/2vAKHTD
Network cable: amzn.to/2vBpJE0
Network switch: amzn.to/2eHsIa7
Hex Key set: amzn.to/2eHvA6C
Fluke meter: amzn.to/2tDaZHj
Fluke temperature meter: amzn.to/2tDxnQO
Dell 32 bit laptop: amzn.to/2us2Z9n
Serial cable: amzn.to/2eHvyf8
Johnson Controls DX-9100-8454 amzn.to/38VgLni
Johnson Controls DX-9100-8990 Back Panel: amzn.to/2IPQa0H
Johnson Controls AS-UNT110-1 - UNT Controller amzn.to/32CVnBB
Johnson Controls, Inc. Unt Series Unitary Controller amzn.to/2SpZCM9
METASYS AP-VMA-1440-0 APVMA14400, VMA Controller, amzn.to/2St5eW3
Johnson Controls, Inc. Fx Vma amzn.to/2XWEPFS
Johnson Controls Metasys NAE MS-NAE5521-0 amzn.to/2Yhyvbn
TRENDnet USB to Serial Converter, amzn.to/2JOxH4y
Johnson Controls T-4000-119 Allen Head Adjusting Tool: amzn.to/2Ygf7LS
Johnson Controls T8590 Residential High-Resolution Color Touch Screen Digital Room Thermostat amzn.to/2JVUhZf
Johnson Controls A99BB-600C Penn Series A99 PTC Temperature Sensor amzn.to/2Ycet1R
Johnson Controls P70LB-6C Dual Pressure Control, SPST amzn.to/2YhO8zq
Johnson Controls VA-4233-AGA-2 Electric Actuator, amzn.to/2JVVcZH
JOHNSON CONTROLS METASYS MS-FEC2610-0 MS-FEB2610-0 CONTROLLER amzn.to/2JT1Qj8
Johnson Controls M9220-GGA-3 amzn.to/32HRVpm

[@dcj2045]

Dude I LOVE YOUR VIDEOS. please make more videos often.

[@Systemcontroltech]

I hope to

[@anthonyeaton778]

Just browsing around your videos this morning. Have you had the chance to try the new BACnet IP FAC4911 stuff? We have a recent install that uses a Cisco Ring Switch and our FAC's are all connected BACnet IP in a ring. The Cisco switch connects to our building network along with the NAE or SNE. Instead of FC bus everywhere we have data cables. The speed difference when uploading, downloading, and commissioning through pass-through is night and day. No more RS-485 for us, Ethernet is the way to go. If you get the chance I highly recommend upgrading to this newer communication, you'll love it.

[@Systemcontroltech]

I haven't used the 4911 yet.

[@gt4033133]

Excellent video

[@Systemcontroltech]

Thanks

[@tom1263]

Awesome video! Thanks!

[@Systemcontroltech]

Thanks for watching

[@mitchs7147]

I might have missed something when you were working with the IP addressing, usually a assigned IP of 169.254 means your device has failed to receive a IP via DHCP

[@Systemcontroltech]

It was only connected to a switch at first

[@emmyweed5827]

169.254 is just a internal network number on your computers network. I have programed a whole JCI network on that address because is was concerned a private on my computers network.

[@Anonymous-kb7ht]

Do you know how to reflash SNC/SNE on STC Pro and how many time we have to do this process.

[@Systemcontroltech]

You will need a copy of the image and you can simply select that option from the download settings in manage archive section of SCT

[@transon6440]

Hi System Control Tech, Could you please give me some advices about the following question: 1. Does the DDC keep the last value of AV, BV and MV when the DDC's the power is restore? 2. If the question number 1 is YES. So, how can you change AV, BV and MV value to the default value when the DDC's power is restore? Thank you!!!

[@Systemcontroltech]

View the specific point you want to change. Click on the options tab at the top of the screen. Change the default value to whatever you want it to be and set the ignore relinquish default to false. It may or may not give you the results you want depending on how you use that specific point

[@transon6440]

@@Systemcontroltech Thank you for your advice.

[@Speider43]

Is there a major difference between SCT and SCT Pro? I have the SCT available from our vendor.

[@Systemcontroltech]

The sct pro is also called Dashboards and is the browser version of SCT. Eventually the browser version will be the only one available. There are some helpful tools in it.

[@darlingkeer]

Hi, which version of the Metasys are you using currently?

[@Systemcontroltech]

Currently running metasys 11

[@franciscocastillo5294]

@@Systemcontroltech Good morning colleague, a small doubt that in the GGT when you go to ''open from metasys'' you log in with the administrator user and the legend appears ''the required service is not available on the host. You may need to upgrade the host." I already tried to update it in the metasys host update option but when I enter the same legend appears

[@jpmorales8]

i need el software for model NCE

[@Systemcontroltech]

Call jci