Removed a section in my camper where the entertainment area is and installed. Works great. Instead of propane furnace heat, I can use this kzbin.infoUgkxATHBlMJwipGgVWseuAFKvDQ_5R4_lywo to heat the camper as long as it's hooked up to shore power. Only thing I do not like is there does not seem to be a thermostat. I'm presuming it has a built-in one so it does not overheat. Really like all the other color options it has to offer.
@richardshort45877 жыл бұрын
Just bought ours today November 26 2016. Have scoured the Internet and KZbin been looking for months. This is the best quality and pleasing ethically for the price point. Allows to almost flush mount which will allow me to add my own LED light around the perimeter. $740 can't be beat plus it's Canadian.
@cghrios783 Жыл бұрын
Could I please ask u. Did u plug it outside or inside? Is it a plug inside the wall or hard wired? Thanks
@richardshort4587 Жыл бұрын
@@cghrios783 We installed a double wall outlet behind the fire so I could run the fires perimeter led lights also from the same outlet. This way all cables where hidden. How I did mine was I ran a dedicated 20 amp wire from the main panel to a 20 amp wall switch. From the wall switch I came down to a 20 amp wall outlet for future use, that is now also switched. From that wall outlet I ran a cable inside the wall across to the 20 amp outlet behind the fire. I was able to do that as the house was undergoing renovations. Hope that helps you out. We went with 20 amp circuit because the fire power rating was getting close to the 15 amp limit when the heating element and blower where on. God bless.
@leopoldrasic59464 жыл бұрын
Great video. Thank you so much for making it. It gave me all information i need.
@embersliving4 жыл бұрын
Glad it was helpful!
@reneereid13168 ай бұрын
I wish my husband took time out to watch these things before he attempts something impulsively
@embersliving8 ай бұрын
We made this video to help!
@kimfog93376 ай бұрын
Just bought the Napoleon NFL54HB. This model has vents on the top, otherwise it looks the same as the model in this video. It’s advertised as a wall mount, but I would like to recess it. The minimum clearance to combustibles is 2” from bottom of glass, zero from the back, 36” from top of glass, and 6” from sides. I also presume there needs to be space for air to flow for the top vents. I would think the combustible situation is related to the heater. Is there a way to disable the heater? I know you can run it without the heater, but would like to disable it in case anyone is looking after our place…
@embersliving6 ай бұрын
Thanks for watching our video! If you need any help give us a call at (303) 800-5659. Also, check out our golf channel @Embersgolf! Thanks Kimfog9337
@noah5432107 жыл бұрын
great video.. very informative. thanks. your helper does a great job too!
@areyouarobotz3 жыл бұрын
Thanks! Time to go install tomorrow
@embersliving3 жыл бұрын
Have fun!
@4677estrella6 жыл бұрын
Thanks for the video will be doing this soon!
@mariamurielmunoz81943 жыл бұрын
Desde barcelona España me encantaria q esta tifnda estuviese aqui para ir a comprarlas directamente a💖👌👌
@embersliving3 жыл бұрын
thanks
@kennethlambright54036 жыл бұрын
It's not flush with wall
@clearviewrecords32688 жыл бұрын
Thanks for the video. Giant help....
@du9194 Жыл бұрын
What is the rough opening measurement
@denaroraflames Жыл бұрын
Very informative. Thank you for posting. I can make a fire colorful like a rainbow. Are you interested?
@embersliving Жыл бұрын
no
@TallmanFoundation2 жыл бұрын
I realize this is an older video. Can this model be mounted even more flush that shown? Looks like it sticks out a little?
@embersliving2 жыл бұрын
It should fit in pretty flush sometimes they have boarder that sticks out a bit. Dimplex firs in really nice.
@TallmanFoundation2 жыл бұрын
@@embersliving Much thanks!
@Colinheunen13107 ай бұрын
What clearances are needed in cavity? Is there a header in that open space ?
@embersliving7 ай бұрын
No clearance. Yes there is
@michaelmohan8172 Жыл бұрын
Maybe a dumb question, but the clearances to combustibles have me confused. It says 6” from bottom, and 12” from top and sides. Since this can be recessed and in direct contact with studs it confuses me. Also I was planning on shiplap finishing on the wall as well. Is the clearances just for protruding objects like a mantle or furniture?
@embersliving Жыл бұрын
yes the amount of heat coming out of electric fireplaces is so minimal
@tacsparks73325 жыл бұрын
How big should the opening be for the install?
@Zendog5006 жыл бұрын
Can it be installed in a recess area? Thinking of the newer NEFL 100FH. Seems that I need space at the top to slide glass up
@Kmuzic2 жыл бұрын
Does it matter for the heat in the wall? Can there be anything fire hazard?
@embersliving2 жыл бұрын
not on electric
@GIZZMOTORSPORTS2 жыл бұрын
can you install it completely flush with the wall?
@embersliving2 жыл бұрын
Ues
@bb82196 жыл бұрын
Tysm
@paigeharris23976 жыл бұрын
Can the inset fire be fitted in to a chimney breast. Any one any idea
@paigeharris23976 жыл бұрын
Ahhh can any one help
@JJ-po5eb3 жыл бұрын
Thanks. How did the fireplace plug in? Was there an outlet inside the cut out area?
@embersliving3 жыл бұрын
Yes it was
@rds990 Жыл бұрын
@@embersliving I am pretty sure that is against code. Outlets cannot be behind walls etc. May be wrong but I don't think so.
@davidchandler68853 жыл бұрын
can you mount the fireplace without studs?
@embersliving3 жыл бұрын
not really
@vyvancouver8 жыл бұрын
Does the flame look real??
@0475Mike6 жыл бұрын
Does the unit produce any heat? Does it require a dedicated circut?
@buddhudd10546 жыл бұрын
0475Mike yes it's a heat fan , it blows out warm air , plug top or can be hard wired
@sammy46342 жыл бұрын
Not even the elusion of a real fireplace... I guess this is what people who want a fake fireplace opt to purchase.