HOW TO INSTALL A POLARIS RZR STATOR (And Why You Might Need One)

In this video, we SHOW YOU HOW TO INSTALL A POLARIS RZR STATOR CHARGING KIT, And also explain Why You Might Need One. Side by sides demand even greater power and reliability these days, and ‪@RicksElectrics‬ has your machine covered on both fronts with their new "Double Shot" kit. This kit is more than enough to power your RZR, Ranger or General and all of its accessories.

The Ricks Double Shot kit, part# 99-500H includes:
* 1000 watt stator
* Two 50 Amp Regulators with 9’ leads
* Ricks High Output Flywheel
* Zip ties for ease of installation
MSRP: $699.99
Double Shot info:
ricksmotorsportelectrics.com/...
#fishersoffroad | #offroad | #utv | #sxs | #adventure | #protip | #shoptalk | #QandA | #atv
Become a Member of our Fisher’s Off-Road Family on KZbin:
/ @fishersoffroad
Fisher's Off-Road KZbin:
/ fisheratv
Fisher's Off-Road Facebook:
/ fishersoffroad
Fisher's Off-Road Website:
www.fishersoffroad.com/
Fisher's Off-Road AMAZON store front:
www.amazon.com/shop/fishersat...
Fisher's Off-Road Email Contact Info:
www.fishersoffroad.com/contac...
Fisher's Off-Road Rentals Website:
www.fishersoffroadrentals.com/
Fisher's Off-Road Podcast:
www.buzzsprout.com/460357
Fisher's Off-Road Instagram:
/ fishers_off_road
Fisher's Off-Road LinkedIn:
/ brian-fisher-5a45188
Thank you for your support!
Brian Fisher

[@jrzyboy76]

I bought and installed this exact kit and the Service Manual a few months ago. I have nothing but good things to say about it. I mounted the regulators the same way he did up on the roll bar for maximum ventilation. My stereo is now louder and crisper, the lights are a little brighter and my winch has a lot more pulling power.

[@FishersOffRoad]

That’s awesome! Thank you for your feedback Chris! 👍🏼

[@user-fq3vp1lq4d]

Great video. Thank you.

[@Hugo-Hernandez]

Great video, Brian. Thank you for showing us the install.

[@FishersOffRoad]

You bet! 👍🏼

[@bigdsoutdooradventure]

I don’t even own a Razr and I enjoyed it. I have a Ranger 1000. You do a great job with your video’s. Like how you don’t get rushed and take your time to explain in great detail.

[@FishersOffRoad]

Thank you! It's a tough thing to balance, not too much info, but not too little either.👍

[@samcox8248]

You did a great job of breaking down the basics here. Very easy to follow and all great tips for a easy install. I’ll be looking into upgrading my turbo S very soon.

[@FishersOffRoad]

Thank you Sam, appreciate your support my friend! 👍🏼

[@krxevensen9968]

Very Nice Work Sir

[@FishersOffRoad]

Thank you! 👍

[@charlesbeckham7746]

Great video, especially explaining the maximizing of your stator wattage for accessories that will lead to burning up your electrical system if the stator is over taxed. I want to add a few accessories to our RMAX, I had not thought about the electrical burden these accessories will pose onto the vehicle. I will delve into the owners manual and figure out what I can add and choose my accessories added wisely. Thanks for the GREAT video and Merry Christmas to the Fishers.

[@FishersOffRoad]

Thank you Charles! If you're running the RMAX with accessories you could get away with the dual battery set up. As long as you're not running a ton of accessories the dual battery set up is just right for that.

[@kj1721]

I lucked into finding a 2022 Polaris ranger someone ordered and then didn't end up buying it and I was able to get it a day after starting my search not wanting to wait for one being ordered. It is a Polaris ranger trail boss which i had never heard of. It comes from the factory with a 900 watt stator so I don't think I would need to upgrade or add a second battery? whats your thoughts on that?

[@FishersOffRoad]

You'll be good with a 900watt. As long as you don't add a bunch of high wattage accessories to it you'll be fine...

[@jaredramsey9589]

I'm assuming that the factory connector for the factory stator is not used anymore with this kit, correct?

[@mikerenga]

Hi there, what do we do with the connector in front of the motor behind the seats that we remove the stock stator connector from? Do we just leave it? Thank you!

[@FishersOffRoad]

Hey Mike, I reached out to Rick’s to answer you back. Did they get back to you or not?

[@HemiDub]

I have a 19 rzr turbo 4, I have a dual battery kit and zrp alternator and still having voltage issues and thinking my stock stator is bad. Will this be compatible with the zrp alternator?

[@FishersOffRoad]

Hey Alvaro, it would be best to shoot Ricks’s a text on their Text line: 603-329-9901 and ask them. 👍🏼

[@Powerstrokepat]

Being that there is 2 charging leads coming from each regulator, can I run 1 to each of my batteries on dual battery setup?

[@FishersOffRoad]

I would say yes, but you may want to double check with Ricks Motorsport Electrics.

[@Powerstrokepat]

@FISHER’S OFF-ROAD I checked with ricks and they confirmed both have to be ran to same battery and then you can tie batteries together

[@FishersOffRoad]

@@Powerstrokepat Thank you for the info my friend.

[@PedroLopez-hl1no]

Were u buy. The kit at need for my rzr 800s. Really

[@PedroLopez-hl1no]

Need one for. My rzr 800s 2010 ,efi..

[@FishersOffRoad]

@Pedro Lopez contact Rick’s Motorsport Electrics, they have them in stock. ricksmotorsportelectrics.com/ 1-800-521-0277

[@christopherlea2773]

What was that u removed the pully with?

[@FishersOffRoad]

It’s a fly wheel puller, we have a bunch of different sizes. If you google it you’ll see a bunch of them for your unit.

[@michaelmilkovich4120]

Did you use loctite 641 on the flywheel?

[@FishersOffRoad]

I don’t remember if I did or not? I usually always use blue loctite.

[@T.Hizzle]

Anyone know the output voltage of each leg of the oem stator for a 17' ranger 900 @ idle. I'm getting 21 volts each leg with one burnt pin.

[@FishersOffRoad]

Your best bet is to get a repair manual, that will have all specs for your machine.

[@T.Hizzle]

@@FishersOffRoad 21.2v AC is the correct voltage. Verified, using two additional 900's. Thanks!

[@christopherlea2773]

If u use rtv gasket do u use the gasket that come with the kit as well?

[@FishersOffRoad]

You can, I also always use a new gasket if I have one.

[@christopherlea2773]

@FishersOffRoad I'm in mud and water alot so didn't know if both would be to much or the gasket would be enough

[@FishersOffRoad]

@christopherlea2773 we generally only use the gasket and we do 30 plus creek crossings every day on our SXS tours. Never have any issues with water getting in. If you use both I would use a light layer of sealer.

[@gabefrantom2781]

How well has this held up. Is the kit still functioning like it should

[@FishersOffRoad]

We installed the unit in one of our rentals, we put 5K miles on our units and then get new ones. We get new units every 6 months. It worked great for the time we had the unit.

[@joeymmt55]

Where’d you get the shop manual?

[@FishersOffRoad]

You can get them on Amazon, follow this link and search for your unit. amzn.to/3CbHnT0

[@donniejohnson8137]

Brain does this fit a krx1000 ..... please let me know.... thank you

[@FishersOffRoad]

Not sure if @Rick’s Motorsport Electrics has one for a KRX?

[@absurd207]

do they make one for a 2012 rzr 800 efi?

[@FishersOffRoad]

Not sure? If you contact Rick’s Motorsport Electrics, they would be able to help you out. ricksmotorsportelectrics.com/

[@PedroLopez-hl1no]

Were you get 1000 watt Stanton

[@PedroLopez-hl1no]

@@FishersOffRoadhi I'd ready think I'd need item how much for rzr 800s 2010

[@PedroLopez-hl1no]

We're. That part need for my rzr 800s efi 2010.

[@FishersOffRoad]

@@PedroLopez-hl1no contact Rick’s Motorsport Electrics, they have them in stock. ricksmotorsportelectrics.com/

[@PedroLopez-hl1no]

High stator for 800s 2010

[@PedroLopez-hl1no]

Stator

[@craigsule2525]

Junk don't waste your money