How to install a Programmable Integrated Tail Light on a 2021+ Yamaha MT-07 by TST Industries

Upgrade your 2021+ Yamaha MT-07 with the TST Industries LED Integrated Tail Light. Our exclusive design features a unique lens design, bright LEDs, and multiple programmable and sequential states.
For more info: bit.ly/3DBxX3O
Make sure to subscribe here: bit.ly/1jq2ZrN
Follow us on Facebook here: on. 1nuTjlF
Follow us on Instagram here: / tstindustries
Follow us on Twitter here: / tstindustries
The TST Integrated Tail Light for the 2015-2017 FZ-07 / MT-07 and the 2018-2020 MT-07 has already proven to be very popular with MT-07 riders, providing a unique and clean look that drastically improves tail section. That's not going to change with the 2021+ model. As soon as we were able to get our hands on this gorgeous bike, we have been working hard to design a unique integrated tail light that matches the design language of the bike itself. The bright LED turn signals and perimeter running light design set this MT07 tail light apart from the rest and enable you to ditch all of the OEM bulk that comes on your new Yamaha.

[@Ottienger]

Put the tail light, tail tidy and the mech front turns on my 2021 mt07 this past weekend, LOVE it!. Sooo much better looking. Love the front turns how they are probably a 1/3 the size and yet brighter than the stock ones.

[@Kastle_Of_Syn]

Just put a deposit down on an MT09, and I’m definitely snagging one of these when they’re released for that bike

[@SammyMt09]

Agreed!! MT09 please!

[@puraliferide]

Had a small moment of happiness thinking it was the MT 09's ): any update on the release date?

[@TSTindustries]

We don't have a release date but we are hard at work trying to get to the goal with that light.

[@lukegazda2395]

Can you guys make some for the Yamaha bolt please! :)

[@Joke89ful]

Can you use this one on EU bikes also ?

[@borninmauritius]

I ordered load balancing resistors for the integrated light. Do you have any videos on how to install it?

[@TSTindustries]

If you are installing on a 21+ model MT7 then there is no need for resistors. Unfortunately we have not made a video covering that topic. We send printed instructions with the resistor kits.

[@808Mark]

I love the look! but really wish the rear blinkers were brighter on this... i feel like drivers behind me wouldn't be able to see them good enough and I'd need to use hand signals too

[@rebellucy6200]

Good looks are important, but being visible to other drivers is priceless.

[@808Mark]

@@rebellucy6200 exactly. You know

[@jellystunts7620]

don’t know if i missed it but how can you program the tail light to constantly blink when braking. please do time stamp or let me know if included in manual

[@TSTindustries]

Watch this video: kzbin.info/www/bejne/pV67dqmNnbuBntE

[@ADDONRACER]

Looks much better, but maybe bit too dark

[@danijelkresko3456]

I tend to order fo my 2022 MT07. Is it the same conectors for USA and EU BIKES? Also is it the same for 2021/2022 because i did not se update for 2022 when i last checked on TST site. Appriciate it in advance for the answers. Thank’s and keep going with good job , ideas and projects. Have great one ! 🤟🏻

[@TSTindustries]

21 and 22 are the same fit and connector wise. As far as is known to us the latest model of USA and EU MT7 has same main tail light and signal connectors for the rear of the bike

[@danijelkresko3456]

@@TSTindustries Thank you for the fast answer. My friend from USA will buy it for me and bring it to EU. Have great one !

[@hazem2418]

@@TSTindustries hey have a question do u think that we can use oem turn signals and only plug the rear light to the tft ?

[@TSTindustries]

@@hazem2418 I'm sorry but I'm not sure I fully understand your question. Are you wanting to use our tail light as a brake/running light only and use your stock signals? If so, that is possible.

[@braydentrimble2197]

For some reason my left blinker doesn’t work on my tail light.

[@mindflaw3876]

Whats that 1002 harness. I can't find it on the website. Pretty sure I need it?

[@TSTindustries]

It's not available on our website as a stand-alone item but if you reach out to our Support Team, they can help you get one. [e-mail]

[@binoleti7008]

How about the legality in the eu? Is there any E-Number or something or is this product only meant to be used in the us?

[@TSTindustries]

Sorry, no E number.

[@mrpigie3292]

So I just installed this on my 22 MT07, everything works perfectly . . . Except for one of the wire harnesses. I swapped them out for one other to check it-and both signals work if they have the good harness. Any recommendations on what I can do?

[@TSTindustries]

I think you may be questioning the double signal connectors. Yamaha changed the connector on these bikes in 2021. Since we wanted to make one part fit all the 18+ models of MT07, we made one tail light with dual type signal connectors. The older style connector just happens to be the same as the license plate light on that bike so you actually can plug one in. Please do not use the grey connectors for hooking in signals, just use the black ones and leave the grey unconnected. Please let me know if that solved your issue.

[@drewhil23]

@@TSTindustries so i would have the green and brown dangling? bc it was driving me crazy

[@iqbalXrajak]

can this be installed in older version mt07?...just for better looks

[@TSTindustries]

Of course. All generations are listed on our website.

[@willerdmann9506]

I have a 2020 mt07 could i still use this on my bike even though its for a 21+

[@TSTindustries]

@@willerdmann9506 we have a video on the 2018-2020 model if needed but yes, it will work.

[@shaunbarclay1309]

any update on the new mt 09 taillight?

[@TSTindustries]

Actively working on it. We have been playing with some prototypes. All of last week in the r&d dept. was about that design.

[@Gunslinger-xp4mc]

@tstindustries I have a 2021 mt09, any chances there will be an Integrated tail light coming for that soon?

[@mn_mt0964]

Yama yari has a prototype check it out

[@TSTindustries]

We actually have not hooked up anyone with a prototype of the tail light yet. I made six different concepts into prototypes and what I have now at the end of that is pretty much the direction I will be taking. There is one in existence and it is on my desk.

[@mn_mt0964]

Why did yama yard say it was from tst and u were working together I don't like to spread false news as I'm also a big fan of your stuff

[@TSTindustries]

@@mn_mt0964 He does have some prototype stuff we hooked him up with. But we haven't released to anyone a tail light unit yet.

[@TSTindustries]

@@mn_mt0964 Are you referring to the Echo signals that we installed on his bike? Maybe that is what he was talking about and you misunderstood that it's the new tail light. But he is and has been working with us for some time. He will be getting the first unit as we start getting ready for release, whenever that is.

[@joshpaugh3224]

Will this taillight work with the 2023 model?

[@TSTindustries]

Absolutely.

[@artysauceyeet3619]

Question it’s normal for it to flash when on the brakes right?

[@TSTindustries]

Your brake light program must be in that mode. You can change that by pressing the program button til you get to the mode you like

[@artysauceyeet3619]

@@TSTindustries thanks for the quick response 😀

[@nicolasortega7525]

the 2015-2017 tailight is mountable in the 2022 model ? i see a guy on ig with it

[@TSTindustries]

Can it be installed? Yes...but the bosy lines of the tail will not match the tail light. This is why we re-designed the unit to fit the 2018+ model

[@nicolasortega7525]

@@TSTindustries thank you very much,love how your work and your customer support

[@TSTindustries]

@@nicolasortega7525 you're welcome.

[@mskKk17]

finally can adapt connectors of old model to 2022 model? thanks

[@ADDONRACER]

Would this work with the yamaha led plus lights?

[@TSTindustries]

What do you mean Yamaha led plus lights? If you leave the tail light's signal connectors disconnected then you can use other external signals

[@ADDONRACER]

@@TSTindustries Thankyou for the answer. Will there also be another taillight for the mt09?

[@TSTindustries]

@@ADDONRACER We are designing a tail light for the new MT-09.

[@youwatchvideogoodyes7726]

Does this work on a mt07 2015

[@TSTindustries]

We have a separate light for the 2015-2017. All products can be found on our website, TSTIndustries.com

[@joaovicente4682]

For mt 09 2022 please !!!!

[@TSTindustries]

It's in the works.

[@BarnBuiltCrew]

So confused my tail light has the 4 plugs but my bike on has 3?

[@TSTindustries]

Our new tail lights have five connectors in total. One main one, and two pairs of turn signal connectors. You will use one pair of turn signal connectors that are appropriate for your model and leave the other pair disconnected. Different model years use the same tail light with different connectors so instead of having multiple subharnesses, we included them on the light.

[@BarnBuiltCrew]

Gotcha ok thanks!!

[@Robocoppat]

Ok heres my problem I have a 2021 Yamaha MT-07 It has a TST integrated taillight TST LED pod lights TST front mech GTR blinkers TST rear license plate light Now everything was already wired up except the license plate light and the (Left) side mech GTR blinker. I finished hooking both of these up last night and tested everything. Everything worked then 2 seconds later on the HEADLIGHT worked.. No blinkers No 4-ways No taillight No license plate light No horn. All fuses were good, with the exception of one 7.5 amp fuse. Replaced that and still nothing works?? Please help someone 🙏

[@TSTindustries]

Sounds like you blew a fuse. When there is a condition that causes a fuse to blow, and you replace the fuse without clearing the condition, that new fuse is going to blow. I would encourage you to inspect every connection made via bullet connectors. They have insulating caps but those can slip off if not locked down like instructed in our vodeos. If they slip off then a short circuit is very likely. That would blow a fuse. After you inspect and repair those connection, you will still have to check the fuses and make sure they are all good

[@Robocoppat]

@@TSTindustries as soon as I hooked up the left side mech GTR blinker, everything worked perfectly for about 15 seconds. Then I lost all lights, except the headlight. I've checked every fuse and they're fine. I went as far as taking each fuse out and checked to see if they were blown, none of them were. Even my horn and USB accessory port don't work. I'm definitely thinking a short somewhere along the way. It all started when I connected the left side mech GTR blinker. Sorry for repeating myself. Taillight, POD TURN SIGNALS, horn, right side GTR blinker along with license plate light all worked fine. Besides starting with the most obvious, any other suggestions? I can understand the lights not working, but the horn? USB port?

[@TSTindustries]

All fuses rae upstream of the equipment they power. A short circuit in a branch causes the fuse to blow for that branch. The branches power several devices usually, with the exception of sensitive things like ignition, FI, etc...those get dedicated fuses. At this point I see you posting in two separate threads under different videos. The best way for us to help you is to get you to contact our support staff through our website. There we can exchange photos/videos, and carry on a conversation that is focused in one place without segmentation. Please go to TSTinduustries.com and contact us through support.

[@Robocoppat]

@@TSTindustries thank you that's exactly what I'll do.

[@user-uf6uj3ee6o]

How does Chinese Mainland buy?

[@TSTindustries]

We do not ship or sell to China at this time.

[@rallitadecoca]

do you send to Spain?

[@Robocoppat]

You're so overwhelming explaining all of the wiring connections in the beginning. Relax, Stay calm and Stay focused on the task at hand. All of your products are incredible. I'm looking forward to installing this taillight, the fender delete kit, the adjustable license plate, and the front blinkers. 👍😃..

[@TSTindustries]

After years of working in our Customer Support department, I've realized some explanation is needed. You'd be surprised with how many emails and phone calls we receive, even with our installation videos, with customers who aren't sure which connector to plug in or what each function does. For example, we've had customers disconnect their assemblies and then think they need to connect to the license plate light connector so they cut and splice only to realize their signal is now always on. This method seems to help just enough.

[@Robocoppat]

@@TSTindustries please know I didn't mean any disrespect, I guess what I was trying to say is anyone not familiar with basic motorcycle/automotive wiring might be confused. Again you're products are on another level. I just bought my very first bike, 2021 MT-07, and I was referred by Danielsmt-07. You definitely earned my business.👍😃.

[@TSTindustries]

@@Robocoppat No disrespect taken at all! We appreciate the feedback, good or bad.

[@Robocoppat]

​@@TSTindustriesok it's midnight and I'm out in my garage trying to hook up the integrated taillight and I also will be using your LE.D. pod lights for the rear also. I want the blinkers in the taillight as well as the pod turn signals to work correctly. I've watched this video several times and I'm not comprehending how to hook up the dual blinkers in the back. I have a 2021 Yamaha MT-07. I have several harnesses I've bought from your company and I need help to make sure I got all the right products to make all the proper connections. Taillight is loosely installed and I have the following harnesses 1 pack Har 1002 2 pack Har 1018 3 pack CVY 03 1 pack FLY101C??( Don't remember ordering this??) Anyway that's what I have . Can you please tell me what I'm missing and,what I need? The POD lights have 2 bullet ends. Thank You in advance and God Bless. Pat

[@TSTindustries]

@@Robocoppat har-1018 is the Y splitter. Start with that in the rear by connecting it into the bikes signal harness.

[@coreywolff7071]

You didn't explain any of the programming....

[@TSTindustries]

kzbin.info/www/bejne/pV67dqmNnbuBntE

[@darylrivera]

Tst industries playing with mt09 owners feelings 😢

[@shakir4671]

it's hideous

[@TSTindustries]

we appreciate your opinion