How to Install a Projector on a Ceiling with 90" Screen (detailed install)

[@GosforthHandyman]

Similar to what I'm using: BenQ W1050 Projector: amzn.to/2tqXtn6 (UK) Luxburg 90" Motorised Projector Screen: amzn.to/2K8eflF (UK) BenQ HT2050A Projector: amzn.to/2MPrd6m (US) Homegear 100" Motorized Projector Screen: amzn.to/2lr1c0p (US) I've also added a full article to go with this video here, hopefully you'll find it a useful addition: gosforthhandyman.com/2017/05/installing-a-projector-on-a-ceiling/ (the above are affiliate links)

[@Niafi11]

See im putting mine in the Living room, but its coming from our high-speed Gaming computer. I have to tweek the Resolution on the computer I found out, and a Certain Distance I found, away from the Screen. I tried to Eyeball it... No Sir. U gotta get the Specs, and measure for that Ceiling Bracket. Cuz theres a certain area that you want your Lens to line up with on the Screen, and the Distance away that is calculated by the Dimensions of the Screen. So yal Cant eyeball it. Lol.

[@stevoCdownunder]

Hi there, Great video. Quick question, what tool did you use for the screws that you put into the ceiling for attaching the ceiling bracket too. And what type of screws are they?

[@stevoCdownunder]

hey there, would you use the following for a ceiling that could be hollow or could have joists. www.bunnings.com.au/ramset-m5-x-9mm-hollow-wall-anchor-10-pack_p2260116 or www.bunnings.com.au/ramset-wallmate-plasterboard-anchor-with-screws-and-hooks-4-pack_p2261042 to hang the projector? thanks so much

[@mjsmith260]

Can this be mounted to sheetrock?

[@widowmaker461]

Just been reading about geefix for hollow walls/ ceilings they have really good recommendations, what projector bracket did you use, i cudn't see a link for them???

[@m123caldwell]

I just spent 44 minutes of my time with you. Well spent time... I'll be tackling a similar job at home in the morning and feel *much* better prepared. Much thanks!

[@GosforthHandyman]

Cheers Mark - enjoy your projector! 👍

[@Rockets34Life]

Just finished watching the whole thing. Researching for mounting projector and you kept me informed and entertained! One question, when you screwed in those 4 screws into the drywall, were they going into a stud or plywood? Thanks!

[@davidhardie3386]

I bought a £13 projector mount from amazon and used your video as a guideline, it took me over an hour to put it up by being as careful as possible 😃good video mate cheers 😃

[@CarlStreet]

I think you tip about placing the bracket at the center of gravity as opposed to the center of the projector is extremely valuable. After all, the center of balance is almost certainly NOT the center of the device because the weight of the various internal components is unlikely to be evenly distributed. I am always amazed at the number of small details that I fail to consider because I am just a layman. Thank you!

[@GosforthHandyman]

No worries - gland to be of help! 👍

[@garrettshaw6345]

As someone with no DIY skills this video was very helpful. Thanks

[@syntrexfpv1347]

Solid work, I have been a home theater installer for about 7 years. At my current company I am the only person who uses anchors to mount projos and tvs they all think im crazy but they just haven't done the research.. I typically use Hilti Toggle anchors which hold up to 124lb a piece and hang 85" tvs with them never had an issue. A lot of people think you need a stud and thats just not the case unless its a full motion articulating mount.

[@ianjones3562]

Good solid advice for this budget projector. A £10 one is just a bit of metal , a £100 mount is one that has fine adjustments to get the best alignment and can take a far greater weight so bear that in mind when buying. Get what’s fit for purpose depending on what level of projector you have chosen.

[@michaelreaves3573]

Nice video, and relaxing music. It helped that the music was not annoying or distracting and I loved the selection. Also, thanks for the thoroughness that you went to in showing us this installation.

[@drawfull]

This is a great help, thanks so much for doing a full, unedited version. I'm turning a solarium/conservatory (not ideal...) into a home cinema setup and this has answered pretty much all the questions I had. Cheers!

[@christophermcculloch2725]

Absolutely invaluable. I have the same mount and now know what I'm doing.

[@ryanbradshaw3715]

@@christophermcculloch2725 Hello. Could you please send me a link for the mount itself?

[@GregoryGuay]

I"m DIYing my home studio/theater. Should I add any other wire besides HDMI ? I don't have a projector yet but will probably be lower end consumer range. Also - given the option, should I add a dedicated circuit to plug the project in to?

[@zorkabaljak3919]

Perfect for my studio apartment! I hate bit tv’s, this is a great alternative, and exactly what I wanted!!

[@jordangenson3037]

Awesome video. My big question is what I am going to do with the cables once mounted. I have a powerbridge I could fish through the wall, however, as this is rental property thinking it might be best to use cablemate.

[@GosforthHandyman]

Yeah, on this wall it was easy enough to fish the cables through the dryline but sometimes neat trunking doesn't look too offensive. Thanks for watching!

[@MtnXfreeride]

You skipped the part of hiding the power and hdmi cable..

[@chwngsir]

Thanks for your video, I am managing to install the projector on the ceiling too, but the plasterboard seems quite thin, is it strong enough to hold the projector and keep it from falling down? Thanks.

[@5PENC3]

Liked this video. I've just purchaed the same mount and screen myself and will be installing them as soon as the screen arrives! I did enjoy the mistake, at least you only made one...I predict I will make more!

[@GosforthHandyman]

Enjoy - no problems for me so far! 👍😀

[@Lee2k4]

Just curious why you chose not to screw it into the joist instead?

[@chrisp.5272]

I love BenQ, had a W1070 years ago, upgraded to the BenQ TK800M. 👌🏼

[@MidnightPodcast]

Are both fans meant to work? Or just the one? :/ My right fan isn't moving at all.

[@ryanbradshaw3715]

Hello. Great video. Could you send me a link for the mount please? It looks exactly what i need. Cheers.

[@simdog635]

Thanks Andy, I find an hammer to work just as well as an all singing and dancing setting tool ;-)

[@ryanview8495]

At 18:14, what kind of screws are those? What kind of weight can they hold?

[@trendyprojectors4743]

Thanks for the tips for installing a projector.

[@erudolph]

Nice video. Although sheetrock anchors are strong, for something this expensive, you really should find a joist to make sure at least 2 of the screws are secured. Over time, downward forces and shaking from your home theater subwoofer will weaken the hold of the anchors over time. :-)

[@GosforthHandyman]

Not necessary with these anchors - they're rated to 15kg each and there's 4 of them - the projector weighs 3kg. I guarantee you the ceiling will fall down before this comes loose.

[@blazer666del]

@@GosforthHandyman Yes but all the stress is within a few inches, really dodgy

[@TruFilmProductions]

I love that ASMR ladder noise.

[@reptilexcq2]

What type of screw thing that you use to first insert into the ceiling that cause it to grab onto it? Are these use because you cannot find the stud?

[@GosforthHandyman]

He - yes, see this vid: kzbin.info/www/bejne/bIC4oqyDhb1gd9U

[@thehal991]

Hi, I've read that pull down screens curl in the corners so I was considering a fixed frame one, but then I have to move it back and fourth. How is your motorised one?

[@GosforthHandyman]

There's a little bit of curl but not bad.

[@cliffc8830]

Was this ecrewd into a joist because i have a projector i want to ceiling mount but not eire if i have to screw into joist or add bit of timber between them any advice id appreciate

[@chrisybradshaw8594]

H i awesome vid, i am makeing a 180 deg curved screen for my flight sim will need ive been told 2 projectors how do i set those up please ,any info would be great

[@CoroaEntertainment]

8:28 You wouldn't believe how many home theaters I've seen over the years, that were mounted with the projector's bracket dead center of the screen, which of course places the lens off center (unless the projector's lens happens to be centered in it's housing, which many are not).

[@mangosouljah]

On the topic of projection distance and projection size, from wall to wall I have 3.3m so say 3m from lense to wall which allows for the bare minimum of project (92inch) is it possible to blow it up or make it smaller or is that what you get and is their no altering projection size

[@Alberto7tube]

Nice Mr. More or less Thank you ❤️

[@piccalocb]

Oh, how a laser level will come in so handy!

[@DrRay06]

Thank you for the full video

[@simonwilliams6140]

Two long bits of string that are the same length attached to the corners of the screen and pulled tight will give you the exact centre of the screen on the ceiling. If you mark the location and then slide your fingers along the strings (keeping them equal and together) mark again and join the points you have a straight line perpendicular to the screen. Helpful if your room isn’t square...

[@germanrendon3084]

Did you tried to find any stud behind the ceiling using your stud detector to secure those anchors or you just drill the ceiling and just place them, because i dont know how is posible to resist that much weight , i was trying to install mine but i doubt it to do it because i was trying to find any stud behind the ceiling to hold the weight

[@GosforthHandyman]

Think I mentioned in the vid, the projector only weighs about 3kg. There are 4 fixings and each one is rated to around 15kg. 👍

[@edraket6870]

Nice instruction movie, what kind of screen do you have?

[@GosforthHandyman]

It's just a cheapy Luxburg screen but does the job!

[@dannyallen9804]

Geez where to start. Clicked on link for screen not sure which one I should get.

[@roslee7]

Great step by step and clear installation. Btw what kind of the cordless drill u using it? can drill on concrete wall too? is it very expensive? i wanna get one for drilling and screwing.

[@GosforthHandyman]

It's a Makita hammer drill - OK for block work and soft stuff but for concrete I'd use an SDS drill. It was about £230 in a twin pack with an impact driver.

[@rosleesulong4187]

so for ceiling is not concrete right can be use foe this kind of impact drill?

[@GosforthHandyman]

I don't really understand, ceiling is made of plasterboard not concrete.

[@taxi615]

this might be a stupid question but why are you using a splitter? nobody I know has one.

[@danpaz23]

Will drywall hold the weight? Or do I need to find the joist to drill into? Have optoma 142x

[@GosforthHandyman]

The expanding metal plugs I used are rated to 15kg each and there's 4 of them. This projector weighs about 3kg so is absolutely fine. 👍

[@danpaz23]

Gosforth Handyman thanks. Also I have a optoma manual projector screen. Do I need to find the joist for that? Weights 5kg. Thanks in advance

[@markleggett1878]

Hi Just came across this video at right time.. I'm going to fit some heavy lights into a kitchen ceiling suspended by 2 hooks but where I want them sited doesn't line up with joists. Had thought of using anchors but wasn't sure if load bearing was same for anchors as they're vertical and not horizontal as in a wall.. Could 2 anchors hold about 3 kilos or should I change position and screw hooks into joists? BTW I love your videos... Mark

[@GosforthHandyman]

Cheers Mark! Really difficult to say without seeing it. I'd perhaps try something like this but I haven't tested them myself - amzn.to/2TgBw7o (affiliate link)

[@jiaminzhu406]

whether I should mount the projector on the ceiling or mount a wall shelf on the wall and put both projector and apple tv on the shelf? How should I choose? Thanks!

[@MrGIBURROWS]

What fixing would you suggest to mount a projector that weighs 11kg if you can't attach to the stud please?

[@GosforthHandyman]

For an 11kg projector I would fix a plate to the ceiling that spans the studs if possible - or if you could fix something in by lifting floorboards above, that would be neater. 👍

[@jiaminzhu406]

is it a good idea to put apple tv on the projector after this mount? Not sure if this extra weight will be a problem for the mount and not sure if the heat from the projector will affect apple tv

[@GosforthHandyman]

I wouldn't cover any vents on the projector - will shorten your bulb life. Weight probably wouldn't be a problem. 👍

[@jiaminzhu406]

ah, thanks for the reply! You make a good point. I didn't even think about any affection to the projector. Emm, so the vents are on the top? Does the mount also cover some vents then? I am just so confused.

[@taxi615]

Why a splitter I plug in the avr and use the input 3 hdmi for sound and video source from my projector. Unless your avr doesnt have many hdmi outputs

[@sim6473]

thank you for your tips ! i'm just gonna doign a similar job in my house and got some doubt about the fixation in the celling ! :)

[@meganpendleton220]

How do you make sure there's not pipes or wires in wall??

[@GosforthHandyman]

See my vid about finding pipes in walls kzbin.info/www/bejne/iKS1pZ-Dbbupgrc 👍

[@tz7813]

I need to send 4k video to a ceiling mount projector from my receiver. Its a 15m distance. I will probably use a fibre optic HDMI cable. Expensive, but less equipment needed.

[@tomr1184]

Mate, would you use rather fisher duo plugs nowadays or those metal ones?

[@GosforthHandyman]

No - I still prefer the metal expanding ones for heavier stuff - just peace of mind really. The Duo replace my red plugs and the lightweight GP fixings. 👍

[@tomr1184]

@@GosforthHandyman Cheers mate, I'll give it a go then. I'm using Duos over 2 years now, it's an amazing invention, really. But now a customer called, wants to install a projector - 13.5kg (projector worth £2K+). The mounting plate is about 40cm x 30cm so 6 of these should be more than enough, I guess. Your video or videos if I count in Test Tuesdays was super useful and helped me decide! Thanks a lot!

[@kobinati9672]

Boss ,my turned up side down on the screen, wont turned back up ,don't know how?

[@cpetsaskaraoke]

where to buy the ceiling mount bracket??

[@birenbhainsa1778]

Ok thanks ,but how to full screen benq ms 535 model .

[@cbcdesign001]

Easy if you have keystone correction on your projector to trim out any slight mounting inaccuracies. It's an absolute pig of a job mounting a projector that has nothing but a little vertical lens shift.

[@FrankWoodPhotography]

All good but the hardest part is the wiring to and from the projector!!

[@GosforthHandyman]

Just one HDMI and power! 👍

[@ncunico]

That bloody music sent me to sleep... Literally. I fell asleep. Had to re watch in the morning..

[@GosforthHandyman]

Ha - hope you got sorted! 👍😂

[@CarlosDiaz-1975]

Very nice video 👍👍

[@Carlos-pc2xd]

will a chrome cast work ? save running hmdi cable ?

[@GosforthHandyman]

Good question! You'll need USB power for the Chromecast but if your projector has USB I don't see why not!

[@Carlos-pc2xd]

Interesting . Save a lot of hassle If it has a USB that powers out should work then . Save running cable across the room . Let u know if it works

[@ernestrutherford7436]

Hi, so I'd like to know if it works, thank you

[@yinsilbi]

Just plug in your Chromecast into your receiver's HDMI slot if you want to fully utilise the surround sound offered by films in Netflix, etc. Netflix films will usually come with Dolby Digital Plus, or maybe Atmos. Still have to think about the USB power though. Some new receivers might have extra USB slots for powering it, I reckon.

[@viekrant]

My projector has single me provision how to install that?

[@christiancentinela]

How do is get to control the screen length ?? Thanks

[@GosforthHandyman]

On this screen there's a control on the screen housing to adjust the height. 👍

[@chrisharris6474]

What’s the purpose of the splitter?

[@GosforthHandyman]

So I can watch though the TV *or* the projector. 👍

[@Sandtree1]

How would you recommend installing a 14kg projector & mount in a flat with a suspended/dropped ceiling?

[@GosforthHandyman]

14kg is pretty heavy - hard to say without seeing it. Ideally I'd lift the floor above and screw a supporting board between the joists and fasten to that. 👍

[@Sandtree1]

It’s a dropped ceiling on an aluminium system (purpose built flat from 2000s), then a 14 inch void and then the steel deck of the concrete floor of the flat above. Unfortunately no floorboards or rafters to use.

[@AmberCheaaa]

Which HDMI splitter did you get and how did it hold up?

[@GosforthHandyman]

I'm using this and it's still going strong: amzn.to/2Q9LYvN (affiliate link) 👍

[@Bond_murgi]

What is the name of ur projector sir pls rply me as much as fast possible

[@mayney1222]

would you suggest mounting the screen first then the projector to fit to the screen to size?

[@GosforthHandyman]

Yes. 👍

[@mattyorkbo9]

Really helpful - thank you!

[@GosforthHandyman]

No worries! 👍🛠

[@BrianGerald]

Matthew, PLEASE see my main comment I wrote today!

[@CoachGarcia]

U were having trouble with the focus i wish you didnt edit the part...where you started adjusting to screws at the top because camera cut then comeback perfect focus what screws did you adjust exactly thanks

[@GosforthHandyman]

Focus is adjusted with the focus ring on the projector itself - nothing to do with the screws. The screws are just for alignment. 👍

[@CoachGarcia]

@@GosforthHandyman 39:00 minutes mark you were talking about altering the position of the projector tweaking some screws sorry i did not explain myself correctly...what i was trying to say when you were not properly aligned you stop the video n boom everything was perfect after im asking because my image is slanted... probably my projector is not perpendicular :/

[@christinecrockford1654]

If you use too long hdmi lead, they will burn out the ports on your av receiver. I know this too well using a 10m hdmi lead. I now use a powered hdmi line via a lan line.

[@blazer666del]

Utter tosh.. why on earth would it do this? I have a 20m HDMI works fine.

[@christinecrockford1654]

@@blazer666del yes does work fine as I had a 10m hdmi too and over a long time ur find ur hdmi port could burn out and break. Risk it if you like but will happen. It draws far more current trying to send signal over longer cable. Why don't u Google this or youtube thats what I did.

[@tz7813]

I need to send 4k video to a ceiling mount projector from my receiver. Its a 15m distance. I will probably use a fibre optic HDMI cable. Expensive, but less equipment needed.

[@dashithewonderdog4031]

can i project on a black wall?

[@Arsenal-81]

Thanks for the video. Would the same HDMI cable you bought work on a 4k projector 12m long

[@GosforthHandyman]

Not sure on 4K. Mine was ultra cheap and I've never had a problem with HD though. If it's cheap enough and the reviews are OK just give it a try. Don't believe the hype that you need a $100 cable. 👍🛠

[@TheFritoNinja]

4K does not go further than 5 meters in a passive cable. You will want a cat5 balun for longer runs.

[@fulesmackofule]

Look for active or fiber optic HDMI cables over 10m that support 18GB/s speed. If you have signal, then the cable is more or less just as good as any other more expensive since it's digital (either you have picture or not).

[@naqashsheikh5595]

i have projector uc40 but not hole back side

[@MuahMan]

With anchors drywall can hold hundreds of pounds.

[@lanceflanagan]

I detest drilling into dry wall. It goes Pete Tong for me every time.

[@OlehProtsiuk]

Guy: it will take about 15 minutes **: 45 minute video😂

[@tintman831]

Why dont you show how to run all the wires and hide them?

[@lemonade3p140]

yes I have to get a mount for my projector

[@Harp1909]

Great job. Thanks for demo

[@Carlos-pc2xd]

I had a image of the camera spinning around and a guy in a white suit in corner of room playing piano

[@Carlos-pc2xd]

ps great vid tho thanks

[@GosforthHandyman]

There's an idea... 😂👍

[@jamessusbilla]

thank *YOU*

[@dudewithaniphone]

So what you're telling me...is.... sparky is slang for electrician?

[@bravo123345]

Idk i found the music a little depressing, very helpful though!

[@vtecmatte]

Nice video, but what's up with the depressive song? =/

[@jasephase2k933]

Would been easy just useing bracket marking instead of both bracket & projector

[@Technicalworld403]

great thnku bro..

[@GosforthHandyman]

Cheers for watching!

[@STEPHENisSTEPHEN]

so dope

[@sigmamale520]

Why the sad music tho?

[@kylegood9875]

This was pretty hard to watch. And took very long to get it done

[@JonDaviesIsHere]

Oh yes, peel that film :)

[@adlcm67]

NICE.. !! - WHEN THE DOOR SLAMS INTO THE PROJECTOR...

[@GosforthHandyman]

Wha...??? It's much higher than the door.

[@leew8812]

Doors don't generally go to the ceiling ya plum

[@davidedeinegri7222]

Reco: watch this at 1.25X speed

[@0505Yana]

What’s up with the music??

[@blazer666del]

That is a bit dodgy with all the stress on plasterboard in such a small area.. Not good. Better to attach some ply to the ceiling then the mount to the ply

[@paulosantiago5555]

loose cable by the ceiling will be everyone prob

[@denkorea]

dude. 44 min video of you installing the projector? come on!

[@EllandwmcCoUk]

Glad I skipped this thumbs down for misleading title, I so wish KZbin had an unwatch button so views wouldn't be counted on bids like this, I was expecting to see a vid about the wiring too.

[@محمدبنيهانيمحمدبنيهاني]

الجهاز شغال تمام المنيوم بعطيني كلمة key lock نوع الجهاز hitachi

[@Squishmallows24]

I wanted a projector Never mind...lol

[@hashforce4065]

I'm guessing 44 minutes

[@procc.]

Is it just me or your projector is not perfectly aligned to screen?

[@GosforthHandyman]

No, just new screen and slight curl on the edges. 👍

[@rickcarp5453]

i put mine in a wall lol i upload later