HOW TO INSTALL A VORTECH SUPERCHARGER! (99-04 New Edge Mustang)

What's up people! In this video, I walk you through step by step process of how to install a Vortech supercharger. This is a V2 Vortech supercharger with a 4-inch inner cooler kit. If you have any questions feel free to ask them in the comments I answer them all! Also, make sure you are SUBSCRIBED because in the next video the car hits the dyno and it made some serious power! Thanks for watching and enjoy! I post every WEDNESDAY AT 3PM!
99-04 Mustang GT
LMR Front number removal video:
• How To Remove Your New...
Vortech Installation Instructions:
vortechsuperchargers.com/page...
IM LOOKING FOR SPONSORS Contact: [e-mail]
My instagram: Prestonsarlo
My tiktok: Prestonsarlo
Mod List: 2004 Mustang GT
-V2 Vortech Supercharger
-Vortech BOV with 4-inch inner cooler
-MHS Stage 2 Camshafts
-Yukon 31 Splne axels and Differential
-BBK Long tubes
-BBK Catted H pipe
-340lph AEM Fuel Pump
-42lb Injectors
-75mm Throttle Body
-SR Performance CAI
-SLP Loudmouth Cat-back Exhaust
-JMS Avenger Chrome 15x10 wheels
-Exedy Stage 2 Clutch
-373 Gears
-Eibach Sportline Lowering Springs
Music Used:
• Cushy - Rambo (Royalty...
• (no copyright music) l...
• Finally - Loxbeats (No...

[@prestonsarlo]

What did you guys think? Something special coming in the next video!

[@chrisspada2688]

DID YOU INSTALL A catch can or breather can ... there are 0 videos of a instal on this year .. I’ve read a bunch of different things I’d love to know what you go with

[@prestonsarlo]

@@chrisspada2688 I didn’t run a catch can I just replaced the breather hose on the right valve cover with w little filter

[@callofdutyog]

Is this with stock internals

[@prestonsarlo]

@@callofdutyog yes it is

[@jacksonlouie6027]

You prolly dont give a damn but does any of you know of a method to log back into an Instagram account..? I was stupid forgot the login password. I would love any tips you can give me

[@user-vr6rd8ig1y]

I bought my supercharger 2 years ago used and it's been sitting in my garage till now, thanks man I've been waiting for a video like this for a long time just don't know how I never came across it before

[@prestonsarlo]

Hahaha glad I could help good luck!

[@kevinpazos9846]

You know, I was kind of intimidated by the idea of doing this on my own. After this though, it seems really easy. Thank you for the really informative video. I know now what I'd like to do with my 96 now. Maybe when I'm done with mine I can line up next to you for a stroll down mexico.

[@prestonsarlo]

Glad I could help! It wasn’t too bad and was definitely worth it! And I’ll be in Mexico waiting!

[@phabpkm]

You’ve just got a new subscriber for sure! Love the vids bro keep doing your thang. This just gave me a ton of motivation to do the same for my 04 gt swapped 98

[@prestonsarlo]

Appreciate it broth! Good luck on ur build

[@erickp2027]

Omg I love how it sounds...I bet it feels like you driving a completely different 🚗

[@prestonsarlo]

Oh for sure! it is a nasty car! you will see it in the next video!

[@ronknowles5302]

Takes me back to when I installed mine. I just wanted it done lol sounds good bro

[@prestonsarlo]

Yeah I honestly thought it’d be worse but appreciate it man!

[@victor3468]

How much did it cost

[@Goatman-pi6xt]

Great content!! I’m getting a 2v new edge soon and I’m excited to see how it turns out in the future!

[@prestonsarlo]

Appreciate it good luck on ur build!

[@sergiodoordie319]

U really a hero for doing this man I know it will help me out when I do mine

[@prestonsarlo]

Hahahah glad I could help!

[@dewaynerobinson3205]

Very helpful bruh appreciate you. I have an 03 gt and looking to do some mods very soon.

[@prestonsarlo]

Awesome man, glad I could help! Good luck with ur build

[@elishawoods9330]

It sounds heavenly💯

[@prestonsarlo]

I agree thank you!

[@Jmuderer]

Bad ass man keep up the content 🤟🏼🤟🏼🤟🏼. Very detailed video

[@prestonsarlo]

Appreciate the words man! Next videos a good one!

[@lozek26]

Personally video was worth the wait, I've been wanting to supercharge my new edge for a while cant wait for more videos

[@prestonsarlo]

Appreciate you waiting man! Been trying to post the video for a week! next video it hits the dyno!

[@lozek26]

@@prestonsarlo can't wait to see what numbers it does, mad respect brother

[@mrmoss149]

Way cool. Thanks for sharing the real deal as far as installation.

[@prestonsarlo]

No problem hopefully I was able to help people!

[@mrmoss149]

@@prestonsarlo Yes you did. Thanks

[@brianfowler4933]

Good vid..in the next few months I’m biting the bullet on the vortech v3(self lubricating) kit. Can’t wait to see the power increase.

[@prestonsarlo]

Awesome! I think mine was 100% worth it!

[@winey99cobra]

Glad you made that video..I've got a V2 sci sitting in my bedroom just gotta get a maf and a fuel pump then I'll be installing mine👍🏻

[@prestonsarlo]

Awesome man glad I could help

[@dh123ize]

What maf do you need because the stock one won't work

[@winey99cobra]

@@dh123ize yea thx for the tip!! but I figured that out 15 years ago🤣 I bought a HPX-E slot maf and a SCTX4 now just gotta buy a AEM wideband..I've been putting it off.. not looking forward to trying to install the wideband lol

[@josiahstewart539]

Excellent video, I really want a supercharger for my 03 GT!

[@prestonsarlo]

U gotta do it brotha!

[@alexacosta3746]

Dude I might actually be able to try to install one myself lol thank you for the video! My 4.6 needs one lol

[@prestonsarlo]

Definitely do it man! Glad it helped!

[@CT-pc3rh]

Keep up the good work

[@prestonsarlo]

Thanks brotha!

[@ErikCornelissen]

Very detailed video, thanks

[@prestonsarlo]

No problem hope it helps!

[@zackmorris25]

Great job brother! Jersey Strong :)

[@prestonsarlo]

Thank you! Gotta love jersey 🤘

[@torresbpxlife]

Very informative video, thank you very much, after this video I fill more confident of doing it on my 96 cobra. Thank you Thank you.🏎🏎🏎🏁🏁🏁👍👍👍

[@prestonsarlo]

Of course! Thanks for watching glad I could help

[@cletiskroeker3552]

Great video!!

[@prestonsarlo]

Thank you!

[@johnkendall9831]

GREAT JOB

[@prestonsarlo]

Thank you!

[@andrewmapes8205]

so awesome, I have to get one

[@prestonsarlo]

They are sweet!

[@HotRod9967]

the hole for the oil return fitting was the funnest part of my install,take plenty of time here people so you do not make a mistake that requires you to replace the pan lol

[@prestonsarlo]

Yeah that was honestly the trickiest part but I had that hammer drill so it made it easy

[@danielprieto1241]

Just awesome, dude

[@danielprieto1241]

Previamente a eso tuviste que poner metales forjados?

[@prestonsarlo]

Thank you! internos de stock!

[@Zues_1401]

Beat place to buy everthing i need for this install

[@prestonsarlo]

I bought all of it used to save money. Not sure of anywhere u can buy all of it

[@malachysmith5785]

Awesome video man! I have a couple questions about what kind of maf sensor your running because I seen it was the slot style and those don’t come like that. I have a v2 vortech non intercooled and my slot style maf is giving me a huge headache! Is there a better way of reaching you?

[@prestonsarlo]

If you have Instagram you can dm me! @prestonsarlo

[@rjosenold]

Hey man thanks for the video. I'm about to order a v3 kit. You said you did only injectors and fuel pump. Do you have stock spark plugs and coil? Mine are all stock

[@prestonsarlo]

Thanks for watching! i have stock coils and a step colder plugs in it

[@c.g.vproduction9410]

Hey Preston, what kinda tool did u used to punch the whole in the oil pan? And is the red oil feed line connected to a 90° angled fitting?

[@prestonsarlo]

I used a hammer drill so it would push the material back because I needed enough material to thread into. And yes it’s a 90 degree fitting

[@jordanthomas2210]

Any idea on where the piping and intercooler are from. CXRacing makes it kit but it doesn't look the same as yours.

[@prestonsarlo]

I’m not sure I bought the kit used and there not brand on the piping

[@reloaded1880]

Hey bro, just came across this video. I'm about ready to install my vortec thanks for the tips. Also, where did you get that front splitter for the new edge?

[@prestonsarlo]

Glad I could help! And I made that splitter myself!

[@reloaded1880]

@@prestonsarlo Nice!

[@enriqueespino8773]

Gracias por los subtitulos bro

[@jonathanadames9318]

Hey gonna be getting a new edge pretty soon, before I supercharge it is there anything I should replace or prep the engine before anything major?

[@prestonsarlo]

Depending on how many miles the motor has it might be a good idea to replace the timing chains and tensioners

[@Vash2v]

What had to be done prior to this? Anything internal on the engine? Did you already have larger fuel injectors? Where did the maf come from?

[@prestonsarlo]

No internals done. I did the larger injectors when I did this just didn’t show me putting them in. The maf is from VMP

[@fakenews4734]

Did you have to bend your AC lines that come from the compressor on the block? My mounting bracket doesnt line up because of the return line off of the compressor into the dryer

[@prestonsarlo]

Yes I carefully bent the lines as well as the bracket attached to them

[@TheRoadhammer379]

Any issues with the lines chewing a hole thru the intercooler or radiator? I have read several posts on a few forums of guys saying this is a problem

[@prestonsarlo]

Nope I haven’t had that issue!

[@marioguerrero8170]

Thank you bro

[@prestonsarlo]

No problem!

[@danielborth7753]

When you tap into the oil pan how do you keep junk from falling in there that'll clogged up a lot of things and you cut the bash bar now that you weakened it what do you do for strength and what is that you tapped into for vacuum on the blow-off valve and my question what happens if you do not get a Dyno tune

[@prestonsarlo]

The air hammer just displaces the material so it shouldn’t go into the pan. I’m not worried about the bash bar because I don’t plan on crashing. And you can tap into the vacuum line from the fuel rail. And you should get a tune for maximum performance

[@alep_sn9550]

Yo! What intercooler piping/intake piping is this with the maf flange welded on?

[@prestonsarlo]

I bought it used so I don’t know the brand but it looks similar to the cx racing one

[@charlesdixon1804]

Question where do you tee in your air line for the blow off valve?

[@prestonsarlo]

I have it going to one of the vacuum lines On the driver side of the motor right near the fuel rail!

[@metalmassacre84]

What air filter did you add? I thought it needed that air intake assembly. 👍

[@prestonsarlo]

That was just a specture filter but apparently they aren’t any good so I swapped it out with a power pipe and a fender filter

[@Jaxen90841]

Saw someone else have a problem getting the unit over the stock belt tensioner. He had to get a different one. Think he was after one with a lower profile and didn't bump into the back of the Vortech. Did you have this problem? Was there a special part number for the tensioner arm? Subscribed.

[@prestonsarlo]

Appreciate the subscribe! But no I didn’t have any issues with the tensioner. I do believe I have an aftermarket tensioner but I unfortunately do not have a part number!

[@kevins6661]

Awesome!🇺🇸👍

[@prestonsarlo]

Thanks brotha!!

[@qv6steeda]

Did you replace the Fuel injectors and Fuel pump? You were able to drive it with out the tune after install?

[@prestonsarlo]

Yes. 42lb injectors and a 340lph pump and yes I was able to drive it out of boost without a tune

[@JoseTorres-lt1oo]

Did you have to sand anything down to make the pulleys spin good? I seen someone sand down some part but im not sure if its supposed to be done for every single one

[@prestonsarlo]

In the video I show what needs to be cut off the timing cover 👍

[@DaisyMonroy]

What's better a supercharger from kenne bell or a vortec supercharger or will they make the same power ?

[@prestonsarlo]

They are both really good and will make Similar power. The vortech tends to be a little cheaper so that’s why I went that route so it comes down to the price and the sound of the supercharger

[@ronknowles5302]

Hey preston where did u get the filter that is on the vortech blower?

[@prestonsarlo]

Got it from autozone I think but everyone said not to run it because it can get sucked into the supercharger so I took it off

[@AXEMAN-od8go]

I’m late on this video but how many miles did you have on your mustang when you put the supercharger on. Any forged internals?

[@prestonsarlo]

Around 150k and stock internals

[@DavidHernandez-my9zw]

Where did you get the fitting for the oil line that goes near oil filter

[@prestonsarlo]

Was able to find a 90 degree fitting at Home Depot actually lol

[@spencershannon1055]

Just got the exact same kit, did you install the fuel pump or have someone do it ? What’re you running for gages??

[@prestonsarlo]

I put in the fuel pump in the video before this one. And for a boost gauge I am running a glow shift one

[@fxrgottn5162]

I’m planning on getting the same kit! Little late but did the kit come with the inter cooler?

[@prestonsarlo]

I bought this kit used but it did come with it. If you buy the supercharger from a retail store it won’t come with it

[@jordanthomas2210]

love the build! Where do you purchase the air-to-air intercooler kit.

[@prestonsarlo]

I bout this kit used of fb but I know cx racing makes a kit

[@jordanthomas2210]

Thank you!

[@reloaded1880]

Do you know the size belt?

[@isometimesuseyoutube8857]

2 Questions 1: do you recommend buying a used kit or new kit? 2: if I were to buy a used kit what price range should I look for for a kit that is good quality? Thanks

[@prestonsarlo]

If u can find a used kit from someone u trust it’s definitely the right route. I made a video breaking down the cost of it all. Go check out my recent videos!

[@isometimesuseyoutube8857]

@@prestonsarlo thanks, I’ll check it out!

[@dh123ize]

Did you have to do any internal upgrades like forge pistons ect...

[@prestonsarlo]

Nope I have stock internals

[@jesusZaragoza-qe1mv]

Would the car overheat, since the Inter cooler is mounted in front of it..?

[@prestonsarlo]

Nope I haven’t had any problems

[@luismedina7132]

Super helpful video! What intercooler are you running?

[@prestonsarlo]

Appreciate it man! And I am not sure of the exact company because I bought the kit used. But it’s a 4 inch air to air. Hope that helps

[@markusaurelius8822]

@@prestonsarlo how much did you pay for the kit used? I found a used kit for 4500 CAD, comes with an intercooler as well as fuel injectors and maf sensor etc

[@prestonsarlo]

@@markusaurelius8822 I payed 2700$ usd. So I think that’s like 3400 cad.

[@javifbabyjz]

Hey bud did your kit come with the tubbing and the intercooler I have mine installed but I’m thinking of doing the intercooler deal next

[@prestonsarlo]

I bout the kit used so it did come with it all

[@javifbabyjz]

@@prestonsarlo dang it I want to get it done I’m assuming I have to get all the tubing done

[@Tweakinontheweekend]

Yo!? How did you put that front mounted intercooler on. The v2 kit on the website looks like the snail faces the passenger fender and not pointing down to the driver side like you have yours? Any insight is appreciated! Thanks man

[@prestonsarlo]

That’s probably because that isn’t the intercooled version. This intercooled kit isn’t directly from vortech but I’m pretty sure u gave to un bolt the “sail” and turn it so it faces down

[@Tweakinontheweekend]

@@prestonsarlo thanks man!

[@weneakhborzable]

Does it need a pressurized oil feed.?or simple oil reservior would do?

[@prestonsarlo]

It is just an oil line. The supercharger pulls and displaces the oil back into the pan.

[@Jparragaming]

Is it a v6? and did you need to change the fuel injectors or the fuel pump also did you have to upgrade the fuel

[@prestonsarlo]

It’s a v8 and yes bigger fuel pump and injectors. I only run 93 now

[@joseloyola5867]

Looking at buying a used kit, it has the two pulleys that you have mounted on the supercharger but I don’t see the smooth plastic one. Do you know where I could buy it?

[@prestonsarlo]

If u look up the installation instructions for whatever supercharger it is they will have a part number for each pulley. That’s exactly what I did

[@joseloyola5867]

@@prestonsarlo thank you very much

[@JoshuaEdwards-nr1nb]

Is there a difference when installing one on a gt vs a NA cobra

[@prestonsarlo]

I believe it’s pretty much all the same

[@henrym3780]

What tip are you using on that chisel to punch that hole? NGL, taking an air chisel to my oil pan makes me more than a little nervous

[@prestonsarlo]

I honestly couldn’t tell u lol it was just one I had laying around

[@anthonycarpenter9662]

Is that the non inter cooled kit with a front mount added

[@prestonsarlo]

Yes exactly

[@ndriverkg104]

what size oil fittings did you use for the feed the one that goes into the oil filter

[@prestonsarlo]

Unfortunately I do not have the exact size because I bought the kit used and they were already on there. Sorry wish I could help!

[@ndriverkg104]

@@prestonsarlo no problem man thx for the reply

[@prestonsarlo]

@@ndriverkg104 no problem good luck!

[@bigboy-on3ym]

Where did you get the intercooler and piping? What size is it?

[@prestonsarlo]

I bought the kit used so I don’t have the brand but it’s 3 inch piping

[@Psittac20]

All the intercooled vortech kits I see are air to water, where did you get the air to air?

[@prestonsarlo]

I bought this kit used so I don’t know the brand but cx racing makes one I believe

[@genericdude6551]

I've been considering doing a Coyote swap but this project costs a lot less. My concern is that I've been told that supercharging the stock 2V isn't the best idea because the piston construction is considered weak and be be easily broken. Anyway, it has been 3 years since this video so I'm interested in how well your supercharged 2V is doing.

[@prestonsarlo]

It has been fine for me! The pistons are fine it is the rods that are not very strong in this motors. I am turning up the boost soon so I am going to build the motor. If u run 6-8lbs it is fine on a stock motor

[@joshievids70]

Wait u didn’t tune it you could drive it that’s good to know I might have to do that when I get mine lol how long was your drive jkem

[@prestonsarlo]

Yeah I was actually able to drive it perfectly fine without a tune. Could be different for some people but as long as u stay out of boost it’s fine

[@carterslaunwhite2396]

what other mods did you do to your car to be able to do this, i wanna do it to my 04 but i wanna know how deep the rabbit hole is

[@prestonsarlo]

U shouldn’t need to do much. Just injectors, fuel pump and a tune and ur good to go

[@MustangFourSix]

@@prestonsarlo what pump?

[@c.g.vproduction9410]

Hey Preston, in this install video did u also put in the 42lbs injectors and MAF sensor when y'all start the car and u driving it to your tuner?

[@prestonsarlo]

Yes the maf was in and also injectors. I don’t know why but I never showed the Injectors going in

[@c.g.vproduction9410]

@@prestonsarlo ok so i don't have the slot style MAF. Mine is the pro-m MAF connected to an air filter and already calibrated for 42lbs injectors. Can that be put on my power pipe into the fender instead of how u have yours closer to the throttle body?

[@prestonsarlo]

Typically you want the sensor as close to the throttle body as u can. You also want it after the blow off valve so I don’t think on the power pipe would be a good idea

[@c.g.vproduction9410]

@@prestonsarlo ok so have the bov located like in front of the water pump area? Here's my number 803-464-6468. Text me as much info as u can please

[@prestonsarlo]

@@c.g.vproduction9410 yup that’s where I have mine!

[@danallen9913]

Just curious how much different the install is on a 04 mach 1 being my motor is a 4v.

[@prestonsarlo]

I’d say it would be very similar. I know things are a lot more packed in there because of the shaker but it should be the same idea

[@danallen9913]

Yeah im deciding on a procharger or the whipple charger.i love the whipple charger whine.lol id be comfortable with 425 rwhp

[@prestonsarlo]

@@danallen9913 I was between the same decision but chose vortech because of the price. Can’t go wrong with either

[@voice_crack_gamer6937]

How much did you pay for your kit cuz i’m looking online and bought the eBay and the brand new supercharger to asking between 3,800-2900

[@prestonsarlo]

If u look at my more recent videos I did an entire price breakdown. But to ur answer ur question I paid 2700 for an entire kit

[@79chevy901]

Nice.

[@prestonsarlo]

Thanks man!

[@davidowens4254]

What louvers do you have? They look good.

[@prestonsarlo]

They were a set off of eBay I bought like 3 years ago. Let me see if I can find what brand they are!

[@magicxc6897]

how often you have to get gas after installing the supercharger

[@prestonsarlo]

Pretty often lol I’ve got a heavy foot and it gets about 13 mpg

[@gagecrump7174]

Can you do this on a v6 it’s my first car and im trying to make a lil more sporty so ya it would be awesome if you can let me know. Ps great video perfect instructions if I can do it to the lil v6

[@prestonsarlo]

I don’t see why you would’ve be able to! I just don’t know of anyone doing it

[@gagecrump7174]

@@prestonsarlo thanks ya idk if I will do it or not I jus want more power from it but might not be the most cost effective route

[@HunterV402]

Where did you get the front splitter

[@prestonsarlo]

Made it myself. Here’s the video kzbin.info/www/bejne/mKeWiottadiqj5I

[@Anti.Los24]

What size did you use to punch the oil pan?

[@prestonsarlo]

I’m not sure exactly but if you go online there is a installation guide that will tell you

[@anmolvirk2907]

Which MAF Sensor did u use?

[@prestonsarlo]

Vmp 5000

[@TheModAddict]

Love that sound. That gas bill is fixing to be crazy..lol

[@prestonsarlo]

Ur not wrong 😂 but we’re looking at smiles per gallon here!

[@tacbear]

I have the same SC...no Intercooler 400/380......27 mpg on the Highway! The only time I got less than 20 was the 4 days I drove 80 miles round trip to Barber's Motorsport Park (Road Course) and ran 45 minutes wide open each day! That week I got 15 mpg. kzbin.info/www/bejne/q3vSdqWfbLybecU&ab_channel=tacbear

[@prestonsarlo]

@@tacbear I did the math and she got 13.7 on every day driving 😂😂

[@tacbear]

@@prestonsarlo Either your tune is rich or you stay in the boost a lot! I have instaledl 9 Vortech's including mine and I have never seen more than a small decrease in gas mileage (UNLESS you stay in the Boost a lot). You need a Boost Gauge , Air/Fuel Gauge, Wide Band O2 sensors, Wideband Commander, 42lb Injectors, a Ford SVT Focus Fuel Pump and a Good Tune (mine was tuned by the owner of BAMA Tuning) it runs 12.50/111 spinning and I have been 171+ at Talladega. I have a Intercooler set up, but never put it on because i didn't want to cut my car up. By the way....good video, I wish 18 years ago there was a vid like that when I installed mine. It took 3 weeks for me to install mine and 5 hours to do the next install for a friend.

[@prestonsarlo]

@@tacbear it’s got all that. Also has cams and headers and all that I’ve just got a heavy foot lol

[@user-tr2cx7kb1l]

Oil pan metal shaving,from the pan

[@prestonsarlo]

Hopefully not

[@zachzoop]

Could I install this kit on a 2006 4.6 v8 f150

[@prestonsarlo]

I doubt it is a direct fit but I am sure it can be done

[@prestonsarlo]

I doubt it is a direct fit but I am sure it can be done

[@krispthethirst5819]

Does superchargers work better for automatics?

[@prestonsarlo]

Doesn’t really matter but it can!

[@stefanospasaro7668]

Hey bro, can you tell me what an estimated cost all up would love to put one on my 01 Cobra. 🤙

[@prestonsarlo]

I actually made an entire video breaking down what I spent to supercharge my car! kzbin.info/www/bejne/q3PZd52Ag7F6f6s

[@stefanospasaro7668]

@@prestonsarlo I'll check it out thanks so much 🤙

[@prestonsarlo]

@@stefanospasaro7668 no problem brotha!

[@samhurst1849]

What piping kit did you go with and Mac did you use ??

[@samhurst1849]

Maf**

[@prestonsarlo]

I do not know exactly what the piping kit is because I bought this used but from what I can tell it is very similar to the ca racing one. I am also using a vmp 5000 maf sensor

[@ronknowles5302]

Hey preston what's u do w your iat plug?

[@prestonsarlo]

If that’s the one that is connected to the maf than it is slotted into one of the intake pipes going to the throttle body!

[@ronknowles5302]

Did u just drill a hole to slot it?

[@ronknowles5302]

Preston where did u pot your bov ? In the pipe come out of the blower to the intercooler?

[@prestonsarlo]

I put it on the pipe that comes from the supercharger and goes into the entrance of the intercooler

[@ronknowles5302]

Awesome thanks dude.im just trying to make sure I do this right so when I go to get it tuned everything is correct.i gotta haul the car 2hrs away

[@prestonsarlo]

@@ronknowles5302 no problem good luck man!

[@ronknowles5302]

What part of jersey u from?

[@prestonsarlo]

@@ronknowles5302 south jersey. Burlington county

[@sno-tactical]

what are you running for cams?

[@prestonsarlo]

MHS stage 2

[@reydominicluciano5950]

Did you upgrade your fuel system?

[@prestonsarlo]

Went to a 340lph pump, 42lb injectors everything else is stock

[@metalmassacre84]

What size fuel injectors/pump are you running? Thanks

[@prestonsarlo]

42lb injectors and a 340lph pump

[@metalmassacre84]

@@prestonsarlo thanks i just saw that on your other video. Lol. Would u still recommend the aem fuel pump. Or go w something that fits better like the svt focus?

[@metalmassacre84]

I bought my sc but missing injectors and fuel pump. Already bought the lightning 90 maf.

[@prestonsarlo]

@@metalmassacre84 I’d get something that fits better personally

[@PuffPuffBass_]

What website did you order this kit from?

[@prestonsarlo]

I bought this kit used off of Facebook. But I believe it’s the cx racing kit

[@misaelortiz1315]

Man, did u have to change things of the engine for that charger?

[@prestonsarlo]

Nope all stock!

[@2vcrew782]

Hey bro how much did the kit run you used? And was there any additional items you needed or expenses? Tune, Gauges etc..

[@prestonsarlo]

I did an entire cost break down video here kzbin.info/www/bejne/q3PZd52Ag7F6f6s

[@2vcrew782]

@@prestonsarlo How’s it running now? It’s been a year since install ?

[@prestonsarlo]

@@2vcrew782 good but needs a trans now

[@2vcrew782]

@@prestonsarlo TR3650?

[@prestonsarlo]

Yeah I’m going to get it built now and build the motor while it’s out

[@AudiBoyzTV]

what size intercooler?

[@prestonsarlo]

4 inch!

[@davidturner9498]

Who did your tune?

[@prestonsarlo]

Fonse performance

[@pacomendez8590]

where can i buy one for my car

[@prestonsarlo]

You can buy one from any online store like LMR

[@jonathanlopez5305]

In your opinion do you think this kit will work on a 1995 mustang gt?

[@prestonsarlo]

The intercooler piping may work but they make a separate supercharger because the brackets to mount them are not the same!

[@jonathanlopez5305]

@@prestonsarlo Ok thank you for letting me know its going to be killer on my 95 stang!

[@prestonsarlo]

@@jonathanlopez5305 no problem! Just do a lot of research that’s what I did!

[@Tommy-hb5qn]

There’s no opinion lol the 94-95 had a different engine than the 96-04