How to Install a Water Pump on a GM 5 3L V8 Engine - Advance Auto Parts

video.advanceau... How to Install a Water Pump on a GM 5 3L V8 Engine - Advance Auto Parts: watch this video featuring products available on AdvanceAutoParts.com.

[@k1LR12]

Torque specs are 11 ft lbs on the first go around then 22 ft lbs on the second pass. Thermostat housing gets torqued to 11 ft lbs.

[@azrael723]

Thank you for posting this

[@slickrick2631]

Excellent video, quick, thorough, and informative. Thank you

[@rubenm.391]

Wow, this video is definitely missing a step or two...... radiator fan shroud removal, tips on securing the water pump pulley so the fan clutch can be removal...

[@marvinstanley514]

electric fans on some models. this video probably had those. my avalanche with the same engine has electric fans.

[@user-zh9xm5es5m]

Thank you you are very insiteful.

[@davidkessler5102]

He doesn't show removing the fan or the fan shroud. Removing the fan is the most difficult part of the process.

[@chaserchaserspeedracer]

It has an electric fan assembly.

[@loayali6926]

Thank you

[@cliffmartinez6785]

Great video! Right to the point

[@Camaro57ltr]

damn didnt even show how to remove the fan/clutch

[@ssgvern]

Older model 5.3 V8s have fan/clutch. I have 2008 Silverado and it has the electric fans. I believe we are looking at something similar here. This channel has another video with an older 5.3 with the fan/clutch.

[@michaelabrakson2919]

Fucked me up too. Know I gotta miss work and get the tool tomorrow

[@frankacevedo6062]

shyt! he knows what he's doing 😊 gd job

[@MattGiff-fy4ls]

If I have metal with rubber gaskets and not paper gaskets, should I still apply gasket maker to the metal rubber gaskets ?

[@rokitman5753]

One small spoon ground black pepper is the best coolant sealant money can buy

[@sethmorrison6842]

thanks that was what I was looking for.

[@jerryburress3103]

what about removing fan radiator shroud not shown thanks

[@426superbee4]

Even the do it yourself repairs, are very costly

[@lrecollet]

how long does it take change out a Water pump on a 5.3?

[@ssgvern]

My question, before I replace the water pump is this, "Can the water pump make a chirping noise when it is starting to go bad." Mine started making the noise here recently and using an automotive stethoscope I believe the noise is coming from the water pump, but it's tough to say for certain. I removed the serpentine belt and ran the engine and the noise went away. Once I put the belt back on, the noise returned.

[@johnlocke6566]

Vernon McNabb The chirping noise could be the water pump but it could be the idler or tension pulley they both have that noise when the bearing is starting to go bad!

[@javierochoa432]

I’m in the same boat ... I changed belt and tensioner and idle pulley but noise didn’t go away so I think it might be the water pump

[@buzztrucker]

My chirping noise was my power steering pump. I used a mechanic stethoscope to pinpoint it. Easy fix.

[@user-zh9xm5es5m]

You must have electric cooling fan, right?

[@426superbee4]

To install a new water pump> Requires, new hoses, belts, thermostat, antifreeze coolant, and maybe some clamps. Cause when the water pump goes out, ITS NOT LONG! THESE THINGS WILL FAIL AS WELL> This will give you many many years of service. Why wait for some thing else to fail? DO IT? DO IT RIGHT 👍👍 Stop leak will buy you some time. BUT ITS GOING TO FAIL AS WELL. Big Time

[@reinardopatete7600]

Greetings Dr. I need to replace the taquetes to my TRAILBLAZER 4X4, BUT I DO NOT HAVE A TTUTORIAL THAT INDICATES ME HOW TO DO IT. THANK YOU.

[@2Jeezuzisreal]

On my 5.3 it was major leaking. I removed the old pump it looked very new and it spun nicely. It had 2 aluminum gaskets i believe one blew out. The Alumaseal did not seal it and Normally i have 99% good results

[@rokitman5753]

Use black pepper works best for coolant leaks

[@andreassmith4609]

What size are the bolts around the water pump?

[@cldiazinc]

I guess this chevy don't need a fan?

[@mlez7197]

cldiazinc Some newer models have electric fans

[@mattyb1030]

Duel electric fan on the newer ones. No more junk clutch fans

[@MediocreMedic123]

@@mattyb1030 wait till your electric one fails

[@samlane9732]

@@MediocreMedic123 would rather deal with a couple bolts and a electrical plug than the old set up.

[@irish89055]

Fan??.....

[@theponzona1]

need to remove fan.

[@mattyb1030]

He most likely has the twin electric fan like mine. The z71 package didn't have the the clutch fan thank god

[@Fkidd702]

Dumb because it’s got electric fans and most have the clutch

[@crea7ure613]

Do not put gasket maker with an actual gasket. One or the other.