I watched a couple o vids from other creators and was just constantly skipping forward to find the real info. What a load of unnecessary waffle. Then i found you. Covered everything nicely and in good humor. Really great vid man. Thanks.
@ESCOTV10 ай бұрын
Cool video bro. You’ve kinda gave me a method on how to do mine for in the future🤙🏾❤️🔥
@BertusBuilds10 ай бұрын
No problem 👍
@BertusBuilds10 ай бұрын
Those of you that are in left hand drive countries should have it a bit easier with less lines to run.
@RogueStreetsАй бұрын
Thank you for the great video looking to attempt this 😅
@starboybmx268Ай бұрын
How do you bypass the Abs?
@Master96610 ай бұрын
👏🏻👏🏻👏🏻👏🏻😍😍
@shawnbonnor70384 ай бұрын
Is this with the brake booster deleted?
@adrianfarrell723910 ай бұрын
Cool video been following from the begining, just at the hydro stage myself will be going at it the weekend. All the way here in limerick ireland.
@BertusBuilds10 ай бұрын
Legend. Hope you get some benefit from it. What car do you have? 🍀🤙🏻
@adrianfarrell723910 ай бұрын
@@BertusBuilds 323i same as yours 4door just in silver sorry for late reply will there be anymore videos?
@RedRoofGarage8 ай бұрын
Great idea on the 90deg fence post bracket! Cheap alternative, im going to try that when I install a hydro on my Rallycross car.
@alexandret.81303 ай бұрын
From watching other videos people said that inline setups tend to make the pedal brakes more unreliable. Have you ran into problems like that? The looks of a single caliper peases me more than having a double caliper. And the cost of install and parts increases a fair bit too.
@BertusBuilds3 ай бұрын
Mine feels the same as it’s always been. I can’t vouch for other people’s setups. Hope you have some success. 👍🏻
@alexandret.81303 ай бұрын
@@BertusBuilds Thanks for your reply!
@geoffstewart9355Күн бұрын
I had the same question. Thanks 👍
@BF7039 ай бұрын
Why your brake lines look like a swastika? 😂
@Milky-ch5xl6 ай бұрын
😂brake fluid bong thingy
@NEET_VT9 ай бұрын
Hey man just checking if you could do a video on how you set up the bumper/front end to be quickly removable
@BertusBuilds9 ай бұрын
Sure can. I’ll see what I can do. 👍🏻
@marinocustombuilds9 ай бұрын
Great video man!
@BertusBuilds9 ай бұрын
Thanks mate 🙏
@kezobkoo7 ай бұрын
nice work brother just wanna ask, if u pull the hydro doesnt the brake pedal press itself? wanna do the same thin as u but im scared of this thing happening to me
@BertusBuilds7 ай бұрын
No. It’s not an issue. Master cylinder front and rear chambers are separate. You’ll be fine. Pedal might feel a bit harder when hydro is applied that’s all. 👍🏻
@adrianfarrell723910 ай бұрын
When bleeding the breaks and hydro i justcseen you pumping foot break, did you have to pump hydro at any stage or did fluid just make its way down the lines by itself
@BertusBuilds10 ай бұрын
If your having trouble yes, maybe a few pulls on the hydro could help while bleeding it on the first stage, before you connect it to the rear lines. But you shouldn’t have to keep pulling the hydro repeatedly to get the air out. The brake master should push the air out.
@adrianfarrell723910 ай бұрын
@BertusBuilds I just have everything plumbed in didn't do any bleeding yet just wanted to make sure before I went at it so not to make a mess of it cheers bertus
@adrianfarrell723910 ай бұрын
Bleeding techniques you did worked a treat hydro working a treat, just 1 last question when stripping the car and you cut out wires that were no longer needed did the car still work away fine, first start up the other day and a few lights on dash, didn't go for spin yet hopefully the wknd around the block
@BertusBuilds10 ай бұрын
@@adrianfarrell7239 I would advise unplugging the wires and running it before cutting. You can always plug thing back in if it causes issues. Air bag systems (which are mostly yellow wiring and yellow plugs) won’t cause any issues other than a light.
@speedy12ization2 ай бұрын
@@BertusBuildsman did you leave in the abs block? Iv tried several ways of doing this and none have resulted in a good locking hydro!
@solarfluxx10 ай бұрын
Looks like that hydro will work a treat! Now that archie is gone, what's the next drift event for you?
@BertusBuilds10 ай бұрын
Not many options locally other than QR. But I definitely have Raleigh on the radar for next year after visiting last month.
@solarfluxx10 ай бұрын
@@BertusBuilds Oh, yeah! I've been meaning to go to the halfway hangs. Looks like a fun event. Maybe it's finally time to weld the diff