How to install an Integrated Tail Light & Fender Eliminator on a 2019+ KTM 690 SMC-R / Enduro

[@MrIridewheelies]

Just got this in the mail, had it on the bike in no time and love it

[@TSTindustries]

Awesome. I love hearing this kinda comment.

[@Colt-Forty5]

Just put mine on and results couldn’t be better!! Honestly think this may be the best fender elim on the market for price and look.

[@TSTindustries]

I am so happy you just had this exact experience with our parts. I designed this kit aiming for that. Thank you for sharing your experience.

[@04sti20]

So I purchased this tail light and harness from them for my 2017 ktm 690 enduro r and then purchased a cheap tail tidy. I have sold the bike since but it worked awesome! I bought the harness so I could make my own connections to the factory harness. The previous owner cut the OEM harness so I just tapped into that. I did this because then I wouldn't have to cut the tst plug off the light. I wish someone would bring them a newer husky 701!

[@TSTindustries]

Yea, we looked for the 701 locally and came up short. They exist but they have to be owned by cool enough owners to lend us the bike in exchange for parts or compensation. That kind of person has not turned up yet. I am glad to see you applying your ingenuity to your custom setup though. IO love seeing hybrid systems using some of our parts.

[@tnyakfisher4743]

Missing out not having this for the Husq 701

[@TSTindustries]

If someone would drop off that bike for a few days we would get it done. It is not by choice that we don't offer that setup yet. It's just not a prevalent bike around here.

[@ironken1796]

Super clean! Well done. Would it be possible to fit the stock turn signals to your eliminator kit?

[@TSTindustries]

With a little ingenuity I am sure it is possible. The electrical connection will be tricky though unless you can crimp bullet connectors onto the OE signal wires to replace the factory JST connectors. Our subharness extra signal leads terminate in bullet connectors.

[@tomtraynor5384]

Super clean install. My recommendation is skip the plate light and blinkers as it has built in integrated blinkers and so much easier and cleaner.

[@TSTindustries]

I'm glad you like it.

[@Yii00T]

It's to be seen it's not just about cosmetic. It looks sweet but always want to be seen over looking cool lol.

[@glitchyboots4333]

Very nice; if using the TST BL6 LED POD TURN SIGNALS on the front of a 2020 KTM 690 ER, which of the MOUNT ADAPTER KITS should I buy?

[@TSTindustries]

If that bike is anything like the SMC-R in the front you will not need any mount adapters. You would still need welectrical harness converters. Check out the front signal video on the SMC-R and see if it is the same on your bike kzbin.info/www/bejne/fXaygn-FrNGdqMk

[@jasunto]

Does the taillight itself shine light on the tag at all? The add on plate light looks like it washes out the plate and taillight a little. I may order this tonight and ride over tomorrow and pick it up.

[@TSTindustries]

The tail light does emit a substantial amount of light and may illuminate your plate a bit but not nearly as much as a true license plate light.

[@turburritos631]

unfortunately i dropped a torques bit in my gas tank while installing this under tail. how can i go about getting that out ???

[@TSTindustries]

Why was your tank open is a question that comes to mind but i guess that doesnt help you much. Grab yourself a magnetic retractor and carefully try to fish it out.

[@turburritos631]

i was putting the rear fender back on and needed the cap off.

[@RemDawg62]

an awesome kit but will this fit on 2024 Husky 701 SM?

[@TSTindustries]

I don't think it's a direct fit. I have seen guys get them installed but it was with some modifications. If work on the other bikes ever slows down a bit i will get a dedicated Husq kit designed. -BR

[@RemDawg62]

@@TSTindustries thank you! Your system is simply the most aesthetically pleasing and I just love the plug in turn indicator options. Congrats on reaching 150K subs guys!! I'm a fan

[@Canuck_213]

When will these be in stock again?

[@MotoPeWee]

Any update about Husqvarna 701 ?

[@TSTindustries]

The unicorn that we haven't been able yo get in the shop. If you are local please bring it in. If we use your bike yo design around the parts and installation is free

[@pepe_valaz]

Is the plate holder able to be put in reverse to allow for a tucked position?

[@TSTindustries]

We would not recommend that due to clearance with the tire under load. Installing any of these components outside of their intended use can cause damage or failure and would void any warranty coverage.

[@pepe_valaz]

@@TSTindustries thanks for the reply!

[@劉名軒-w1b]

請問這個可以保留原本的方向燈吧？

[@codybaumgartner5566]

2018 model work with this light?

[@markbcn4000]

Love this!! Would it also fit the 2017 Duke 690?

[@TSTindustries]

I doubt it. That bike is quite a bit different.

[@Bullettime6]

Will it work on a 2012 model KTM 690 SMC-R ??

[@TSTindustries]

I think the components in the rear of that gen SMC-r were different. I do not think this will work on pre-2019 model

[@Bullettime6]

@@TSTindustries Yeah, it didn't look right to me either. Thanks for the fast reply!

[@markymark4514]

looks great. Would it fit the husqvarna 701 ? bolt on ?

[@TSTindustries]

We haven't been able to get a 701 in-house so we cannot confirm or deny fitment and functionality.

[@markymark4514]

@@TSTindustries do you sell the plastic led light only ? i can make my own bracket

[@TSTindustries]

@@markymark4514 do you know if the connections would be the same on that bike?

[@markymark4514]

@@TSTindustries not the same ben again i can put somme connector on my own

[@04sti20]

What if I wanted to use external turn signals and not the integrated one? How would I go about that

[@TSTindustries]

In that case you can unpin the terminals on the green and brown wires in the six position connector leading from sub harness to tail light. This will retain the connection from bike harness to external signal pigtails, but not forward the current to the on-board integrated signals in the tail light.

[@MrDukanpower]

Will it fit on my te450?

[@Greenmanalishe1]

Will this fit my 23 model?

[@TSTindustries]

KTM has not changed the bike yet, so yes.

[@WayneP1973]

2017 KTM 690 enduro? Need this.

[@TSTindustries]

I believe that pre 2018 Enduro was different in the rear.

[@WayneP1973]

@@TSTindustries That’s what my research tells me also. I ordered the tail light and I will make my own bracket/ mount. Thank You for your response. Wayne.

[@andrewswenson4307]

@@WayneP1973 did you end up working this out? I have a 2017 enduro as well

[@DjKimsey]

(shot in the dark) would this fit on a 2017 690 smc-r model?

[@TSTindustries]

Unfortunately we haven't gotten a 2017 model in-house to test fitment and function on.

[@DjKimsey]

@@TSTindustries than you for your reply, just out of your experience. Would 2011 parts fit a 2017? I know they revamped the 2019 2020 but curious

[@TSTindustries]

@@DjKimsey i am hoping to have an older model in the shop sometime soon so I can develop our kit for it. Until I do I can only go by what I find on the web and you have access to as much info there as I do.

[@04sti20]

Do you have plans on making one for a 2017?

[@TSTindustries]

You make the bike appear in our shop and Bart will make it happen. You see, the toughest thing is really getting these bikes in house for long enough to make the parts and install them.

[@04sti20]

Where are you located

[@Top_Pops]

Will this fit Gas Gas SM700?

[@TSTindustries]

We have not had that model in the shop yet biut it looks exactly like the KTM model. All the parts as far as our installation goes look the same between the bikes. I have no way to validate 100% for you though.

[@nickholm6436]

has this been tested yet on 2020-21 husq 701? very interested

[@TSTindustries]

Faith Riding Johnny has retrofitted this kit to the Husq. We unfortunately have not had the appropriate bait to attract a critter riding a 701 into the shop so we can come up with a proper kit and instruction video yet. If you are local bring by the bike and you will get parts and installation for free.

[@nickholm6436]

@@TSTindustries i wish, im in WA state but thank you for replying. ill keep my eye out for if you guys have something come out

[@Sappdaddy7]

Any update on the 701 Husqvarna 2020/2021?

[@amac_]

Do you ship worldwide? Also, does it fit a european license plate?

[@TSTindustries]

We do ship to most European locations. The angle that the license plate is held on should clear tire even with your street size license palates there. For slot spacing please refer to the product page. You can measure the hole spacing from your plate and see if it will fit the range we have with the slots on our bracket. I have seen this kit on European bikes but can't tell for sure if they had to do any modifications.

[@hunnysingh4377]

Nyc bike

[@TSTindustries]

Thanks ✌️

[@joe121592]

Post on Amazon so I can purchase!

[@TSTindustries]

We only have select items on Amazon. Our entire catalog of parts is available on our website TSTindustries.com . We are not adding any additional items to Amazon any time soon.

[@joe121592]

@@TSTindustries Aight, thanks for the quick response.