How to install an Integrated Tail light on a 2015+ Yamaha R3 by TST Industries

R3Define your tail section with our all new Programmable Integrated Tail light for the Yamaha R3. For more info see: tstindustries....
Make sure to subscribe here: bit.ly/1jq2ZrN
Follow us on Facebook here: on. 1nuTjlF
We spent a lot of time designing and prototyping this Yamaha YZF R3 Integrated Taillight and now it is finally out. Its unique design, a powerful light engine, programmable light functions, and plug-and-play installation are among the aspects that set the TST Industries unit apart from the competition. We took a truly innovative approach to the development of all the components we provide for this little sportbike. Our taillight, in combination with our undertail / fender eliminator system will transform any Yamaha YZF R3 into a sexy sport machine.
We are confident that you will be as excited as we are when you see our TST innovation put to good use on this little beast of a bike!
Please use the link above to navigate to the R3 Taillight product page on our site. There you will be able to access more information and photos of this tail light.

[@travisolander4749]

Videos like these absolutely help sell products. I'm about to pick up this light for my R3. I wouldn't have bothered had I not seen this. Great video production quality.

[@TSTindustries]

Thank you very much. The videos is part of the product itself. We engineer the components, then we manufacture them, and then it is time to enable anyone with basic tools and skills to install them. I believe that it is the most well rounded package available when it comes to what is included with a particular product. Thank you for taking the time to share your opinion. It is appreciated.

[@marl0nbrand01]

Just wanted to say I contemplated buying the Chinese knock off on Aliexpress but I ultimately decided I have too much respect for all the passionate work you guys do in supporting the R3 community and ordered both the rear unit, the relay and the halo front signals in clear versions from your store. Can't wait to receive them and install them on my 2019 Stealth black R3. Keep up the great work!

[@TSTindustries]

Thank you very much brother. I hope that more people wake up to the fact that if they purchase illegal copies of our products we have less incentive to keep designing new parts in the way we do.

[@raminass]

Looks great, mine comes in tomorrow with the fender eliminator kit and led plate light. I was so excited I already have everything off just waiting for the parts lol

[@ketsymar]

Man I just got this baby Installed today July 7th, 2019. Supernimpressed, using this video. Huge change. Thank you so much. Bike changed for better good. A+++

[@cameronoquinn94]

You guys are a custom riders wet dream. These things look sick. Hats off to the company's design team. And outstanding presentation from the gentleman in the video as well.

[@TSTindustries]

That's awesome...thank you. The guy who presented the installation actually designed the tail light....and now is responding to you. Cheers!

[@buradd]

after watching the video instructions on how to install the fender eliminator, stealth plate light, and integrated tail light, I successfully installed it all in one shot, even threw on the gen 2 flasher relay.. very easy to follow videos, thanks for the great product.. there is a small blemish on the integrated tail light that is on the smooth clear plastic, probably not noticeable to the naked eye but it does make my OCD flare up a bit knowing it's there ;( other than that, I'm loving the TST product all over my new bike, thanks guys!

[@TSTindustries]

Great to hear you are enjoying our products. I am curious to see the blemish you are talking about. Can you provide a photo or two?

[@buradd]

imgur.com/a/fkkUW its not that large, and really only noticeable if youre looking up close with the ignition off.. kinda hard to get a clear focus on it with my cell camera

[@Vertignasse82]

Fascinating. I don't even have a motorcycle license and I get absorbed by your videos.

[@ruchirgoswami5]

@TSTIndustries You guys are doing a great job making very simple videos. No further explanation necessary. Only one complaint; All the Tools used by Bart should be listed. Looking forward to purchasing Fender Eliminator and Tail Light after tools are listed. As I had really hard time installing Womet Tech and other stuff since every part has certain torque requirement and it's for guys is just started driving and does not own all the tools. Thanks!

[@TSTindustries]

We are glad you find our content helpful! We have actually taken that idea into consideration and we now list all the tools needed in the intro section of our videos.

[@ruchirgoswami5]

I still don't see tools listed under description section. Awaiting list so I can order and install fender eliminator and integrated tail light. I am insisting because of tools issue I couldn't install womet tech swingram spools. Thanks again!

[@liluzibiscuit8011]

Mine just came in today as well as my fender delete thank you TST!

[@choadlogan7417]

Just put on the fender eliminator and integrated taillight. Thanks for the great service and videos!

[@TSTindustries]

Sure thing. Enjoy your new goodies.

[@devious-x-demon8586]

I just ordered this, fender delete, flush turn signals from your website I’m sooooooo excited

[@TSTindustries]

We're excited to hear your comments after installation

[@dl59rider68]

its my dream bike

[@TSTindustries]

I like it too...that is why I own two of them.

[@JayHubzGamming]

a R3 is your dream bike? i own one but damn dude why sell yourself that short. There is a R6 and R1 as well

[@ctsvblk]

Jay Hubz lol does this guy even know about the Ninja H2R

[@cameronoquinn94]

There are things that are easier to do on a smaller bike then on a bigger bike. Like twisties. Easier to flick a light bike around and an R3 still has enough "Umph" to give an average cruiser a run for its money. -Ninja 400 Owner

[@HumanStateOfEmergency]

I like strobe brake with standard signals

[@adanbuendia2099]

Love it thanks for the video and all the steps on it! The only thing that, kind of bothered me a little was the background music, too high pitched when I had to turn it up to hear y’all talk. That’s just me though lol but great video and set of instructions though!

[@jbl7092]

Works great! Already getting compliments on how it looks. Thanks for the great instructional video. Be sure to get the flasher relay. Very simple installation.

[@TSTindustries]

Awesome, thank you!

[@jesselopez862]

Thanks for the great installation videos Bart! So far I've installed the front flush mount signals on my R3 and the flasher relay. I'll definitely be purchasing this integrated tail light when it comes back in stock :) Keep up the good work TST Industries!

[@TSTindustries]

Thanks buddy! We worked really hard on this unit and are excited to finally bring it to the market. Check back on our website late August - early September.

[@RaviKumar-uy8ss]

This back light is soo awesome

[@TSTindustries]

Thank you

[@RaviKumar-uy8ss]

@@TSTindustries is it available in india?

[@TSTindustries]

@@RaviKumar-uy8ss yes

[@linux_38]

Awesome video and AWESOME product TST, thanks again for developing this for the R3!

[@TSTindustries]

You are welcome. We love designing unique products, especially when clients like yourself appreciate the extra work that goes into making it all happen.

[@gronkgrunk]

Great instructional video. Really appreciate the step by step & clear explanations. Good job, TST!

[@TSTindustries]

Awesome. You're welcome.

[@dmzsniper]

Would be better to see how it looks in the dark. Also Right now the indicator looks like it may not be too clear in the daytime especially with the flashing brakes

[@TSTindustries]

Maybe this video can help you out a bit more kzbin.info/www/bejne/eWjYe2R6itmhatk

[@shakersmilejoe]

Getting mine delivered today, perfect timing!

[@TSTindustries]

Awesome. After you install we hope to see some photos on Instagram of Facebook with appropriate tags.

[@briankeith757]

+TSTindustries do you have a video for the R3 on how to take off the right side fairing so I can check the coolant

[@TSTindustries]

You can watch our Frame Slider installation video for help with removing the side fairings. Link below: kzbin.info/www/bejne/rV6nmImtYrmLmdU

[@karthikkumar5984]

I have added this today it is awesome from INDIA

[@reward1trueuser]

Thanks for instructions and product. Install was a piece of cake and product is dope!!

[@TSTindustries]

Thanks for the feedback!

[@cianosavalas]

16:55 Begins the programming section.

[@TSTindustries]

hmmm...I wonder why you had to post that

[@cianosavalas]

@@TSTindustries I posted that because most new riders that would purchase this item would probably have it installed by a professional. At that point they would only really want to know how to cycle through the break/turn signal options to suit their preferences. I just cut to the chase with my comment.

[@cianosavalas]

@@TSTindustries BTW I purchased the smokeTail light, smoke blue halo flush mount turn signals, fender eliminator kit, smoke rear turning signals, flasher relays, and handle bar ends for my blue 2019 R3

[@codyhodges2125]

Wish I had seen this comment 20 minutes ago

[@untitledfuture]

Amazing video!! Super happy with how it looks!!

[@TSTindustries]

Thank you! Cheers!

[@ozarkana]

I had one of these hooked up and working on my R3, but I disconnected it to re-install the stock fender. Now I have stock turn signals but can't use the LED light for anything, including brakes. So I reconnected it as it was but now I get nothing. If I hook up the larger plug but leave the stock tail lights connected to the two smaller plugs, can I still get tail and brake lights? Any ideas?

[@ryanespina190]

so nice, makes me dream about that bike so so nice great job guys 😀

[@TSTindustries]

Thanks.

[@fastlane1952]

Love the phrase "Free it from its geometry". btw Love the Tail Light also lol

[@TSTindustries]

captive geometry

[@fastlane1952]

I stand corrected sir :) awesome Tutorial.

[@TSTindustries]

+☯ Everyday Vegan ⓥ haha...in the next video I shoot I will say "emancipate it" just for you

[@fastlane1952]

LMAO

[@kevinAA2022]

Great video easy install took 20mins

[@xandepena6722]

Como consigo uma lanterna dessa aqui no Brasil? ??

[@coffeebuddy9215]

Do you guys have this for the 2021 models now or not yet,

[@danielvenditti561]

Mine doesn’t work, tail light keeps the signals solid but when I put oem back it’s normal, I will contact support tomorrow but not a recommendation

[@TSTindustries]

Please contact support but in the meantime just consider the fact that you wired your front signals incorrectly. Your front signal plug has a running light and signal light circuit. On your bike they are most likely wired in a configuration where your running light circuit is shorted to the signaling circuit thereby pushing current to the tail light signals and tripping them. We see this one customer bikes all the time. It's not a problem with our tail light but rather misconfigured signaling system on the bike.

[@rayray3866]

quick question guys.... i just installed this the other day and the first time i started it all the lights worked fine. later that day i turned it on to show someone and the running light wasn't turning on but the turn signals worked. the brake lights worked then finally after cycling through turn signals and brake lights the running halo turned on... any ideas?

[@TSTindustries]

Does the issue persist or was it a one time thing?

[@rayray3866]

hey, actually i think i found whats causing it. maybe you guys have run into it. After installing the integrated Tail light i installed a Bazzaz Fuel Tuning unit. the Bazzaz instructions said to connect the 'Scotchlock' connector to the blue wire for the tail light assembly to power the bazzaz unit. so after i connected that wire i realized the problem with the tail lamp....after some head scratching i figured the bazzaz unit was pulling power from the TST lamp, i disconnected the wire from the TST harness side and connected it to the Blue wire on the body harness side and so far i haven't had the same issues... only a few times it's taken a couple seconds for the lamp to turn on.... i'm just curious now if there is a different place i can connect the bazzaz connector to, that wont affect the stop lamp at all.

[@Garybaws]

how can i have the tailight + indicator displays work together?? I want to keep my back indicator lights

[@TSTindustries]

For that purpose we manufacture Y-Splitters . They feature one input from bike harness and two outputs for signal lighting. They are sold as a pair. You can get more info here: tstindustries.com/tst-yamaha-y-style-signal-harness-splitter.html

[@domshady96]

Starting at 17:05, is there supposed to be that much of a gap between the top of the tail light and the panel? No worry about water getting in?

[@TSTindustries]

The tail light we produce has the same external geometry as the OE unit. Those gaps are the same as with the OE light. Because this light is used on several motorcycles we did not change the geometry to cater close the gaps on just one model. That would have adversely affected the fit on the other models.

[@guiluvimont]

Hey, Is there any possibility to send to Brazil? I really liked this tail light to my 2016 MT-03. Tnks

[@ryanespina190]

wish i have that bike on my birthday tommorow

[@lukenelson9029]

mine just came in and says it’s by tst industries, but mine is not the same plug in. mine has a bunch of individual wires. any idea why this is? or if i’m still able to install it like this?

[@TSTindustries]

Well it sounds like you got yourself a fake. If you aren't purchasing from our store or authorized dealers chances are you are getting a cheap dupe.

[@joizul1990]

if not using relay for R25 it ok(cause my country only available R25..not R3)??or will blinking (signal) much faster than usual??

[@josevaldes6748]

Very nice!

[@john9810]

i live in australia should i also buy a different type of relay? i really love this and i want to make sure everything will work nicely

[@TSTindustries]

Please contact our customer service guys through our website. They will help you figure that out.

[@sonam6873]

please extend your delivery options to India have wish-listed most items i have viewed in your channel and would love to install it in my r3

[@jeffmichel898]

What's the best light sequence, in your opinion

[@TSTindustries]

I personally like sequential signal and strobe alert brake. But this is a matter of personal choice, not really what is best per se.

[@USMCwifey2001]

are these legal in california? to my knowledge, the lights have to be a certain distance apart. Thanks for the help

[@TSTindustries]

You would have to check your local laws prior to making a purchase.

[@Puma4454]

Does it always flash red/amber when you brake?

[@TSTindustries]

There is no amber in the brake programs. It only uses red. We have three brake programs: Standard, Strobe Alert, and Pulser. You can see the demonstration of these functions at 17:17 in this video.

[@azizulhakimmdzurai4274]

Can you make post delivery to my country MALAYSIA?.really love it..how much for this tail light??

[@TSTindustries]

Sorry but we do not ship to Malaysia.

[@jestonitancio4990]

Can you make post delivery to my country PHILIPPINES?

[@benms4555]

Its that can use install to yamaha y15zr??please reason.. swear god, i like it..

[@MasterKeyMagic]

why do people not like hyper flash? Its easier to get noticed on the road with it

[@TSTindustries]

Please consider the fact that if you use a sequential signal type, the sequence takes a certain amount of time to complete for each flash cycle. If you have hyperflash each signal cycle is not long enought to light up all the signal LEDs.

[@alexjbas]

Great product! Shipping to Australia?

[@TSTindustries]

All the time. We have been using DHL for delivery there and that shipping service has been very fast.

[@pabloalmeida368]

Olá, serve também para Mt03 2018, e vocês encaminham para o Brasil também?

[@treenarodrigues8179]

make a video about the tires

[@TSTindustries]

We don't manufacture tires.

[@OnyxHaze]

can the bike, lighting components, bulbs or fuses be damaged due to hyper flash? IMO i think it looks cool and better chance of being seen but are there vehicle code regulations ?

[@TSTindustries]

They will not be damaged, however some of the light programs for the signals will not operate correctly if you have hyperflash.

[@Fred-eg9sx]

just imagine strobe light with hyper flash, probably give the driver behind a fvcking seizure...

[@ovobrett]

When are you guys getting the fender eliminator back in stock?

[@TSTindustries]

They are back in stock

[@anthonyalava2478]

Definitely getting this Tail light, super sweet. One question though, I want to add another set of rear directional lights, how would I go about with the wiring if they are connected to this tail light? Thank you!

[@TSTindustries]

No need for any special wiring. We have Y-splitters that are plug and play and enable tje very thing you are trying to achieve.

[@TSTindustries]

We actually recently made a video about them. Check it out. kzbin.info/www/bejne/qpjUk3WwjtWJqaM

[@anthonyalava2478]

TSTindustries thanks A lot! Will do. Subscribed as well , great content

[@JID01]

How do you change modes? I got one of these but there were no instructions on operation-just the installation...

[@TSTindustries]

JID01 there is a button on the black enclosure that has the word "program" by it. With key on, press it to toggle through the modes.

[@cpt.kahnuckles1376]

TST, none of the program functions are working on my R3. It appears to be stuck on standard brake light with strobe turn signals, nothing happens when I press/hold the program button. I have the clear lens with the gen 2 relay installed on my 2018 R3. All the lights function fine but I'm disappointed that I am not able to change the programs. Any advice?

[@TSTindustries]

Are you pressing the program button when the tail light is in just running light mode? If not then you won't be able to toggle the program. Please try that. If that still doesn't work then you can send our customer service guys a message through our website and they will make sure to get you up and running properly.

[@franciscojoshua5025]

Is the size of the tail light same with MT-03?

[@TSTindustries]

Yes. We have a separate category for the MT-03 on our website.

[@luisortega2017]

This will fit my 2016 fz07 right? and do u have any available as of now?

[@TSTindustries]

Currently out of stock but check our website late August - early September. And yes, this unit will fit your FZ-07 without any modifications. 👍

[@wormfans4949]

Does Yzf R3 & Yzf R25 have the same installation part? Meaning they both got same size of their accessories. Its because I have R25 instead of R3 in my country.

[@TSTindustries]

We do not have the R25 model here so we cannot help you unless you send us photos. You can send those to our customer support crew through the Support tab on our website

[@zer08927]

I was thinking on adding the led pod signals in addition to the integrated taillight for more visibility. Do you think it would be overkill?

[@zer08927]

+Pierre Visconti yeah, i just want the most visibility possible. I would do the strobe brake with sequential blinkers and the additional led pod for maximum visibility.

[@TSTindustries]

I think the taillight along with our pod signal kit would work well for your purpose then.

[@bularia1]

So, I'm not clear on this. Can I install and still use the integrated turn signal function and add your LED pods so they both work together?

[@most4142]

หาซื้อได้ที่ไหนคับ

[@TheAceTroubleshooter]

The pulse mode for the brake light, will be illegal in most states, if not all. No Red or Blue lights may pulse on any non-government vehicle. I doubt many cops would ticket you for it, but they sure could. We all know there are some sticklers out there. Also, I just checked out your website and you guys only carry 2003 ZX6r mods and up... I own a 2002 D:

[@gabeferlin1826]

So if you don't have the relay how do you install the load balancing resistors ?

[@TSTindustries]

Our load balancing resistors come with printed installation instructions. Typically you just follow those instructions.

[@user-cg9vp9bf5d]

Will not using a flasher relay damage this taillight?

[@TSTindustries]

Using the light without an aftermarket flasher relay will not harm any electronics in the light.

[@user-cg9vp9bf5d]

TSTindustries Ok thank you! For now I’ll keep it on without one but I’ll look into getting one eventually

[@alexcaymans]

ok, question: Do I need to get the FENDER ELIMINATOR AND UNDERTAIL KIT first before installing the integrated tail light kit?

[@TSTindustries]

Not really. You can install the taillight by itself.

[@alexcaymans]

ok thanks. i bought both anyhow bc it looks better lol

[@joizul1990]

Can be post delivery at my country MALAYSIA??

[@TSTindustries]

Sorry buddy, we do not ship to Malaysia

[@joizul1990]

;(

[@PulzarJa]

Hi, will the integrated tail light work with the stock signal lights? i am thinking of having this using its full functions with another led signal lights.

[@TSTindustries]

It can if you connect the wires correctly. It will likely not be a plug and play connection but it's pretty simple. You will connect your external signal wires into the bike's harness signal leads. Next you will need to splice the single signal wire for each side of the taillight into the positive wire of your external signals. That's it.

[@MikeIsCanadian]

Does anyone know if these are street legal in Ontario?

[@marlrico]

sir i wanna ask do i need only one TST 2 Pin LED Flasher Relay Gen 2 for both the integrated tail light and the halo gtr front LED flushmount signals? thanks

[@TSTindustries]

Yes you would only need one LED Flasher Relay to control both your front and rear signals. Please watch our Tech Tip video to learn more about our LED Flasher Relays (link below): kzbin.info/www/bejne/a6XPgpmdlKajbqs

[@rodmaiquez726]

can you ship it to philippines?

[@amitgore]

sir, can i keep my stock tail and install this integrated tail light? is there any connector to let me keep both stock turn lights and this tail working at same time.

[@TSTindustries]

That is absolutely possible and with the help of our Y-Style Signal Splitter found at the link below! tstindustries.com/TST-Yamaha-Y-Style-Signal-Harness-Splitter.html

[@alexamericoarlindo]

Não enviam para o Brasil?

[@TSTindustries]

Not at the moment

[@HUSTLINISMYGAME]

Do you have a video on how to install the relay?

[@TSTindustries]

Yes we do. Here is the link kzbin.info/www/bejne/nIC1oJiLmLeIfqc

[@petyamazaky]

TSTindustries onde encontrar o seus produtos no Brasil?!

[@Tiger_huru_hara]

do you export this product in taiwan ? if yes i want to buy to my r3

[@TSTindustries]

Sorry, we do not

[@gregorysantana72]

TSTindustries canada?

[@anitapattnaik8800]

How can I purchase it iam from india

[@TSTindustries]

Sorry, we do not ship to India at the moment.

[@vincec.778]

Will this fit for 2018 mt03?

[@TSTindustries]

We do not have the pre-2020 bike here in the USA so we never got to test that fit. I believe the pre-2020 has a different tail light.

[@NikolajA1995]

Damn I wish I could get this to Europe without being robbed in the toll :D Good products, guys (Y)

[@TSTindustries]

Sorry. We hear that all the time. The customs fees to Europe can be discouraging.

[@thirodriguessp1]

Same here in Brazil...or even worse!

[@jakeb.1318]

Does it have a license plate light at the bottom?

[@TSTindustries]

Jacob Buenrostro it does not

[@steventaylor143]

The pulse breaks don't make sense to me. If you're trying to break into a turn and your taillight is going all crazy it may confuse cars behind you. Seems kind of unsafe to me. Other than that the smoked ones look sick on the r3 and something I would get if I decide on the r3 over the ninja 400

[@TSTindustries]

The pulse modulates brightness of the brake and gets noticed by drivers behind you that may not be paying attention. You don't have to use that function if it is not what you want to use, but it's there within the programs if you decide that is what you want. The taillight gives you three different brake modes to choose from so the choice is yours. Our Ninja 400 taillight will have the same programmable options. If you want to sneak a look at what we have in store for the 400 then see our latest video on that model. There is a sneak preview of our Ninja 400 taillight in there. Here is the link: kzbin.info/www/bejne/jKm8qY2wmdF3qs0

[@steventaylor143]

TSTindustries I understand the purpose of the pulse function I just feel there's a lot of idiots on the road and it'll confuse people lol. Just my opinion. I do like the breaking Option where it pulses about 3 or 4 times then goes solid. That's probably the one I would use.

[@987headshot]

Ships to Malaysia ?

[@SuperSelebet]

Syahiradzi dpt beli ni cun gak bro

[@987headshot]

SuperSelebet hahahah tu la pasal

[@zariffsafwan2487]

Finally..! Tq

[@Fred-eg9sx]

is it weird that I like hyper flash?

[@TSTindustries]

Just know that if you use the sequential program for the signals then with hyperflash the sequence will not complete because with a faster flash rate there isn't enough time to go through each signal sequence.

[@Fred-eg9sx]

Thanks. I only have hyper on my front signals

[@takelsgaming1635]

Dou you ship in philippines?

[@tarzanmajhi1306]

can it ship to India?

[@TSTindustries]

I'm sorry but we do not ship to India.

[@hirozensarutobi470]

TSTindustries how about in the philippines?

[@Aragon947]

Can I use it in europe (Austria) ? Without getting problems with the police.

[@TSTindustries]

That is tough for us to determine here. Please contact your local transportation authorities and find out from them.

[@renedias9733]

compatible r3 2020?

[@TSTindustries]

Yes

[@89siver]

Out of stock already, any preview of when it will be available again? Do you guys ship to brazil? if so can you estimate the shiping value? Fit the same way on the FZ 07 or will require aditional parts?

[@TSTindustries]

The pre-order event was a huge success and we sold out of our first batch rapidly. We are in the process of assembling more of these lights and will post updates on our blog page about this product ( tstindustries.com/blog/2015-yamaha-yzf-r3-fz-07-integrated-tail-light/ ). We stopped shipping to Brasil because of many delivery issues. Basically anytime we sent something there it was a loss for us. This setup will fit on an FZ07 without any other parts needed. We shot that video already. It just needs to be finalized and it will be posted here on KZbin shortly.

[@89siver]

Thx for the quick reply. Pls let me know if the is any changes on send policy to brazil.

[@TSTindustries]

Technically, if UPS ships to your location and you are ok paying those charges along with their insurance we can invoice you and send it. Just a warning though...UPS is very expensive. Probably on the order of $70 or more.

[@89siver]

I will get in contact with sac. Through email. Thx

[@jackrizzman]

Could this tail light can be used for the R25?

[@TSTindustries]

We do not have access to the R25 here in the USA so we cannot verify that for you.

[@ryanlabanon6459]

How much for intergrated tail lights,halo gtr turn signal ang fender eliminator?thanks

[@TSTindustries]

Please follow the link in the description of the video, drop the items you want into your cart, and input your address. You will get a full quote on the selected parts along with shipping

[@shaanamir4631]

can you ship to Maldives? need quick answer

[@TSTindustries]

shaan amir the quickest way to get an answer to this question is to contact our staff through the support tab on our website

[@gabriels.o7483]

Hi, do you export to Brazil? Thx.

[@TSTindustries]

Sorry, at the moment we do not.

[@Hays_-to2si]

Just wondering, do you guys send to Canada (just in case)

[@TSTindustries]

Yes we do.

[@hendriko8140]

Shipping to Indonesia? been looking for it in my country but zero result

[@TSTindustries]

Unfortunately at this time we do not ship to Indonesia. Sorry about that.

[@hendriko8140]

Ok, bro. Thanks for replying.

[@thrinadhv4743]

Can we get in India?

[@TSTindustries]

Unfortunately at the moment we do not ship there. The good news is that we are trying to figure out how to expand to that area.

[@mogggasso2140]

Really nice.

[@TSTindustries]

Thank you.

[@joenellopez3753]

Do you guys ship here in Australia?

[@TSTindustries]

We do. We actually sell quite a good amout to Australia

[@joenellopez3753]

TSTindustries Cant wait to get mine

[@anandarezkyramadhan451]

Please Yamaha yzf r25

[@FernandodeCristo]

Ships to Brazil?

[@TSTindustries]

Unfortunately we do not ship to Brazil.

[@Rikrakful]

Do you export in thailand?

[@TSTindustries]

Unfortunately we do not ship to Thailand at this time.

[@Rikrakful]

+TSTindustries 😞

[@Rikrakful]

+TSTindustries many people in asia buy 300cc bikes.

[@santoscastino8131]

Nice how much was that .....

[@TSTindustries]

Link is in the description.

[@jasperdominictulayba8936]

is ths available now n the philippines?

[@TSTindustries]

I'm sorry but we do not ship to the Philippines.