How to install and program a 5800WAVE wireless siren to a Honeywell Lynx Plus L3000 - Winning Tips

Jason of Alarm System Store shows you how to install and program a 5800WAVE wireless siren to a Honeywell Lynx Plus L3000 wireless alarm system.
He will walk you through how to do it yourself. What he'll show you in this video is how to set the RF House ID Code in the siren's DIP switch settings and also the programming in the L3000 for setting this as well. He'll also show you the placement of the tamper magnet and how the 5800WAVE gets its power.
The Honeywell Lynx Plus has an onboard piezo siren in the panel itself, but most people like to put the main control in an out-of-the-way place and use the 5800WAVE. They'll do this so that possible intruders won't follow the sound of the Lynx's piezo siren to maybe smash it and the 5800WAVE just adds a louder siren sound as well.
Please comment in the comments section if you have any questions and be sure to slap that like button and subscribe to our channel for all of our how to videos for some of today's most popular DIY security systems.
We have a quick start programming guide for the L3000 that has the instructions on how to do this and can be found here - www.alarmsyste...
You can also visit our website at alarmsystemstor... for all of our great deals on security equipment.
You can also follow us on the following social sites for information, coupon codes, and much more!
Facebook - / alarmsystemstore
Twitter - / alarmstore
Google+ - plus.google.com...

[@rshinn8776]

does this work with the L5100 panel? does this siren chime, or do the zone fault announcements like the panel?

[@Alarmo05221]

To answer your question, yes it does. Though this old siren I believe is unable to chime. The newer SiX siren is able to chime. However, SiX Sirens are only able to work on Pro series or Lyric