Thanks so much for posting this. I had a window sensor go bad, but I didn't want to have ADT come out and replace it. I followed the instructions in this video and had the sensor replaced and working in less than 10 minutes.
@sidney.williams5 жыл бұрын
Excellent delivery of instruction!
@franky42072 ай бұрын
The Honeywell link plus is so confusing it works great, but the program is not not fun
@triciaalexander1344 жыл бұрын
Thanks for the helpful video, but what can we do if the master code has been lost? I have the installer code, so tried to do a reset; but can not find any information on how to program a master user code. I can find information changing the master code, but I would have to know the master code to do that. Help?!?!
@OhioDan4 ай бұрын
I have a strange problem after reprogramming a front door sensor for a family member. For some reason, the system does not want to chime for this door anymore, even though it chimes as expected with the back door. I've programmed the zone number as A02, and the zone type as b01. My understanding is that this should be the correct configuration for the front door. The back door is A03, b02 and chimes properly. I also manually added the voice descriptors for "front door" to this zone. In fact, when this door is open, the system will say it's not ready to arm and will announce "front door" when asked for the fault code. But it will not say "front door" as a chime during normal operation. Unless there is something I'm missing, the only idea I have is to remove the zone and recalibrate the sensor to the system again from the beginning, to see if the chime feature will come back.
@bullfrogpondshop31795 жыл бұрын
Great video, thanks! Using this video and your Quick Start Guide, I was able to replace a defective door sensor.
@haroldcummings-lf9sk Жыл бұрын
Is there a chance of getting a manual sent to 274 East gepford parkway, Sun vally Nevada,thank you so much, Harold Cummings
@GoldyCraft793 жыл бұрын
Nice.
@LL231014 жыл бұрын
Can you do a video on how to program a window sensor to the Honeywell Lynx Plus L3000?
@judimartin96923 жыл бұрын
Can this be programmed to auto alarm and disarmed at a certain time?
@brendenburge73496 жыл бұрын
Hello, do you program panic button pairs in field 56 of programming? If so, is Zone 95 FIRE, 96 MEDICAL, & 99 POLICE?? Thanks in advance for a quick response.
@cathys21823 жыл бұрын
Can you tell me how to lower the volume of the entry exit chime? Also how to switch from the chime to voice announcement?
@albeirocastaneda5271 Жыл бұрын
Como hago para borrar una zona o serial del sensor ya q voy a programar un sensor nuevo y no me deja hacerlo
@victoriafranco4 жыл бұрын
Hi can you tell me how to delete a certain zone? I have a couple of zones where the windows have been changed and the sensors do not work anymore and I am tired of having to bypass them instead of just being able to just delete that zone. Thank you
@rcg91722 жыл бұрын
Same here. Cannot find that process anywhere!
@GoogleUser-tq5uj2 жыл бұрын
Do you still need help with this?
@navyphil61055 жыл бұрын
On L3000 Lynx controller. I now have only some of the chimes working (front and side doors) The other door and window do not chime. I have turned the chime on and off and the problem does not correct.
@khatharrmalkavian33063 жыл бұрын
Instructions unclear, programmed toilet to attack house-guests.
@GoldyCraft793 жыл бұрын
LOL
@rickdavis93524 жыл бұрын
What if it is a wired system??? I need zone 1 info
@electronicaytelecomunicaci63445 жыл бұрын
hi can you help me how to program the wireless keychain of this alarm. Thank you
@AlarmSystemStore5 жыл бұрын
We do offer free tech support on items you order from us. If you did order from us you can call 888-811-0727 and talk to technical support. They will need your order number to help you. If you didn't happen to buy it from us then we do offer a paid technical support option which you can find here - www.alarmsystemstore.com/products/telephone-technical-support-for-up-to-15-minutes
@skept2146 жыл бұрын
is there a way to remove the beeping when a door is open but still have the description be announced.
@AlarmSystemStore6 жыл бұрын
You can shut off the audible exit warning in programming. Programming section *37 handles this
@timothyfarnum69644 жыл бұрын
How do you reset this system?
@Alexsmartway2 жыл бұрын
Is it similar to the lynx r en?
@andybowman96972 жыл бұрын
Yes it is.
@mrobvious1100 Жыл бұрын
I just purchased a house that has the L 3000 series. The home owner gave the real estate agent his master code but forgot the installer code... He said they told him that you have to unplug the power adapter from the wall and disconnect the battery from the panel. But he doesn't remember all the steps... Could you give me the steps so that I can change the installer code to something new?
@Jodie_M4 жыл бұрын
What if you don’t know the installer code?
@billyharrison39794 жыл бұрын
Tons of great info but kind of jumping around when explaining a feature.
@HooliganBoii5 жыл бұрын
How to delete a zone?
@AlarmSystemStore5 жыл бұрын
On these systems you'll usually go into the section to program zones, *56, and then go to the zone you want to delete. When you get there you will scroll through by pressing * until you get to zone type. Set zone type for 00 then press * and it will ask you if you really want to delete it.