87-96 Ford Bronco/ OBS Ford F-Series Bucket Seat Cushion is on sale for $135 plus ship. Will not fit 40/20/40 (these are in preorder status) I take Venmo, PayPal, Zelle, Cashapp or mail me a check. Email me at n2kpi@yahoo.com for more instructions. Please remember to include your full name, EMAIL and mailing adddess.
@TheSlcpunk1988 Жыл бұрын
My goodness! Every other KZbin channel is either painfully slow with no time lapse, or they skip all the important stuff. This is amazing
@BroncosandPartsGarage Жыл бұрын
Thanks.
@Really6588 ай бұрын
@@BroncosandPartsGaragethank you. p.s . I recognize the Pacific green, what is the gold color called?
@AMCguy10 сағат бұрын
Amazing video! Helped me out a bunch
@johnboyofalaska41823 ай бұрын
Guys-- THANKS!! This is EXACTLY what I needed. After 37 years I decided to work on the windows of my green 1989 bronco-- kinda like yours in the video! Both window motor plastic assemblies were toast, and I decided to limit the cancer by replacing the window molding too. Thanks! (and thanks to Jeffs Bronco Graveyard for the parts!--ALWAYS the right stuff)
@BroncosandPartsGarage3 ай бұрын
No problem!!!
@richardzimmerman12169 ай бұрын
Tanks so much for putting this video together. I had my old bullnose apart and this really helped!
@BroncosandPartsGarage9 ай бұрын
Glad it helped!
@azactor Жыл бұрын
I've been looking on how the vent window comes out. I didn't know it was that big. Vent windows are one of the best things about Bronco's. The airflow you get with them is awesome. They should put them in every vehicle.
@BroncosandPartsGarage Жыл бұрын
Yes. It’s very simple. 3 screws.
@AmazingBlaze05 ай бұрын
I think the reason why they stopped them were because they were easier to break into or something along the lines of that
@kevinlakey96252 жыл бұрын
Absolutely one of the best how to videos I’ve watched. I like how you just speed it up and don’t go away and come back and have two other things done that you didn’t see you do! Thanks again fellas
@BroncosandPartsGarage2 жыл бұрын
Thanks. We try out best
@kevinlakey96252 жыл бұрын
@@BroncosandPartsGarage Hey guys I bought some door overlays for my 95 F150 and I’m wondering if you got a how to video on install? No predrilled holes for fastening bottom?
@AngelPerez-ug3sl10 ай бұрын
Great video man. The rivet trick helped out a lot! I was getting tired of loose window seals.
@BroncosandPartsGarage10 ай бұрын
Fantastic
@jamesbenisrael9574 Жыл бұрын
Great informative video found your channel by mistake use your channel to install a bumper on my 94 Ford F150 great videos keep them coming guys
@BroncosandPartsGarage Жыл бұрын
Thank you!
@michaelwebb8788 Жыл бұрын
Excellent video!! Thank you for posting it! I watched this first and spent less than an hour on each side getting my door and window seals and sweeps replaced on my 89 Bronco. The tip on riveting the internal sweeps into place was super helpful.
@BroncosandPartsGarage Жыл бұрын
You're very welcome!
@clindberg14922 жыл бұрын
Well done and timely because this is at the top of my to-do list. Emphasis on clever insights and neat hacks to overcome common issues tailored to DIYers makes this the go-to instructional video for any Gen 5 owner. Thanks Chris and Bearded Assistant!
@BroncosandPartsGarage2 жыл бұрын
Thank you. The bearded assistant. Lol. His name is Jesse. Great mechanic.
@mikebailey30308 ай бұрын
I have been watching your videos for quite some time and they have been extremely helpful for my 1990 Bronco XLT. I just finish watching this video and it was a breeze to do my doors, however the vents are being a pain. I wish you could have shown that process. Thanks for all you guys do!
@BroncosandPartsGarage8 ай бұрын
We have a vent video
@foxbody11526 ай бұрын
Hey I’ve got a 1990 bronco xlt
@kevinbeamon9220 Жыл бұрын
These are so helpful!! I will pick up my “new” 1989 Bronco Eddie Bauer Edition in 12 days. You have provided me such a head start to my project. Thank you! 😊
@BroncosandPartsGarage Жыл бұрын
You are so welcome!
@raizt1596 Жыл бұрын
Appreciate the rivet trick! Thanks. I'll be doing this on my 86.
@BroncosandPartsGarage Жыл бұрын
No problem.
@wowchad2 жыл бұрын
I’ve got an ‘83 down in Puerto Rico with ZERO SEALS or TRIM left & have to say,as much as this project is on my to-do list, it’s amazing the abuse that old glass puts up with! I’m pretty sure 90% of my rattle noise is from all the glass bouncing around inside the doors, but she just keeps on truck’n along while I wait to get my new felt down with me next trip down. Thanks for another good video😀
@BroncosandPartsGarage2 жыл бұрын
Thanks!!!!
@badallis41582 жыл бұрын
This is one the next things I plan on tackling on my '95 F350. Thanks for a great video.
@BroncosandPartsGarage2 жыл бұрын
Thanks.
@janusklaplong270910 ай бұрын
Thanks guys!! Very helpfull!
@BroncosandPartsGarage10 ай бұрын
No problem. I had good help
@botoepfer546 Жыл бұрын
another great video
@BroncosandPartsGarage Жыл бұрын
Thanks
@Jackon2wheelz9 ай бұрын
Thank you, this video was great. I'd never done type of work on any kind of vehicle before. I followed along and did both sides of my F250, easy as heck. Great video, I'm a subscriber now.
@BroncosandPartsGarage9 ай бұрын
Thanks. I had great help making it
@7.3psd902 жыл бұрын
Have ever made a video on a complete dash removal? Sorry I’m being lazy and instead of searching your video’s. Great video btw!! Thanks
@BroncosandPartsGarage2 жыл бұрын
It’s coming in April
@f150bft Жыл бұрын
Oddly enough...Ford calls those "sweeps"..... Belt mouldings. Great video
@BroncosandPartsGarage Жыл бұрын
Thanks!!
@bloomexcolombia2000 Жыл бұрын
Your doing great things. I live in Colombia and restautating a 1994 5.0 XLT Bronco. I'm doing OK but there are no spare parts available here and also tried to get from the US but mostly they don't ship to Colombia. My only option is ebay but due to bad experiences I don't want it. I found your clips here and used them for some things. Thanks. But now, could you help me and ship to Colombia? Like your canal, keep on BRONCO-ing. Thank you
@BroncosandPartsGarage Жыл бұрын
Thank you! I can make special Ebay listings for you and allow international shipping. I can’t ship international from ups
@bloomexcolombia2000 Жыл бұрын
Is there any posiblily to get in touch with you by email or whatsapp? I would like to get your suggestion, after I sent a photo. Now the swimmer in the tank seems to malefunction, is there a way to repare it or do I need to get a replacement? Seems you are the only guy on you tube, giving and showing normal ways of fixing issues. Other are completely insane or give tips which are rediculous and dangerous
@BroncosandPartsGarage Жыл бұрын
@@bloomexcolombia2000 my email is in the video description. Click on title and scroll down. Thx
@bloomexcolombia2000 Жыл бұрын
Found it. Thanks
@kevinprice21412 жыл бұрын
Was going to do this job this weekend, last did it when I bought the truck 15 years ago. I want to pop rivet it, but last time I couldn’t get the door panel installed with the inside sweep in place. I had to remove it and reinstall after the panel was in place. But you made it look easy. Once I rivet it, it’s there for good, so I’ll have to make it happen.
@BroncosandPartsGarage2 жыл бұрын
It’ll go in pretty easy
@charleslewis7007 Жыл бұрын
This was very informative. Could you make a video on how how to Re align a door And how to fix the inside handle. I have replaced my inside driver's side door handle 4 times now because they keep snapping even the metal ones keep snapping
@BroncosandPartsGarage Жыл бұрын
Jeffs bronco graveyard sells the door handle reinforcement brackets for $25. Once installed they eliminate the flex in the body of the door and you’ll never break another handle. I’ve used them. They are fantastic.
@noscopesallowed81289 ай бұрын
These videos are fantastic. Incredibly helpful
@BroncosandPartsGarage9 ай бұрын
Glad you like them!
@Leddemo2 жыл бұрын
Found your channel last night, and looking through your video's I realized I saw your vent removal video months ago! I have 3 (yes, three) 9th gen's. I need to be doing a lot of interior and door stuff on them this summer so I'm SUPER looking forward to seeing some content in the near future. I like how your video's get right to the point. I'm pretty mechanically inclined so I can probably figure out most things, but it's nice watching a tutorial first. One is a ultra nice Green/White '97 F350 dually, I have a '92 Red F150 that's "nice enough" to put a little bit of effort into, but will be a winter hauler (also in Michigan), and a '93 F150 that's donating a TON of parts to the other two plus a rainy day bin. This video pertains to my '92 in particular lol. Hoping to see that manual to power conversion video soon! (saw it commented on another video)
@BroncosandPartsGarage2 жыл бұрын
Thanks! Videos are a blast to do. I always watch someone else’s video before I do a project because there’s always something new to learn. No matter how simple the task. The manual to power just requires an oem harness we sell and power mirrors!! Please share my channel.
@Kevin-is-here Жыл бұрын
Straight into the point👍🏼
@BroncosandPartsGarage Жыл бұрын
Thanks. Hope it helps!!
@gonefishing7813 Жыл бұрын
Terrific…just the help I needed
@BroncosandPartsGarage Жыл бұрын
Glad it helped
@genogeno6643 Жыл бұрын
Thanks Guys!
@BroncosandPartsGarage Жыл бұрын
Our pleasure!
@themetalmaiden7462 Жыл бұрын
Awesome video and information. Thanks for making this.
@BroncosandPartsGarage Жыл бұрын
Thanks. Glad it helped
@jeremyrobert2052 Жыл бұрын
Thank you for this video. Just purchased a 93 Bronco and the window seals are like plastic and chipping off now. My driver's side door tint came off when rolling up the window today and I'm wondering if it rubbed against the trim? Do you reccomend doing this before having the tint replaced?
@BroncosandPartsGarage Жыл бұрын
Thanks for watching. Definitely replace your window sweeps before the tint
@TheRoadhammer379 Жыл бұрын
Top shelf vid, thank you
@BroncosandPartsGarage Жыл бұрын
No problem 👍
@quandaledingle89602 жыл бұрын
Your the goat for these videos 😂
@kellismith43292 жыл бұрын
Excellent video, I am currently doing this same project
@BroncosandPartsGarage2 жыл бұрын
It’s great. Makes a big difference.
@kellismith43292 жыл бұрын
@@BroncosandPartsGarage yes it does, I am super happy with it the truck seems new again I had never thought of using the dynomat around the outside perimeter under the door panels, I had a bunch of that around so used your idea there
@rentcda2 жыл бұрын
Always look forward to your videos. Good job!
@BroncosandPartsGarage2 жыл бұрын
Thank you. Fun too make!!
@brendabenson96522 жыл бұрын
Great detail
@BroncosandPartsGarage Жыл бұрын
Thank you!
@kylestivers46062 жыл бұрын
All of my little tabs are broken. I have mine pop riveted through the top and it looks like hell. I'm definitely going to get a new set of inner sweeps and rivet them the same way you did. My outer sweeps are mint still.
@BroncosandPartsGarage2 жыл бұрын
We sell used door panels….never seen them pop riveted thru the top. But whatever works and keeps it on the road!!
@kylestivers46062 жыл бұрын
@@BroncosandPartsGarage I had rivets that were too long to go through the back so I put them through the top. But I have to get new sweeps and rivet them through the back because it drives me nuts seeing those rivets.
@johnp19662 жыл бұрын
great video. i need to do this, hope it's as easy as it looks,lol
@BroncosandPartsGarage2 жыл бұрын
It is. Email any issues.
@t.j.h2810Ай бұрын
Be extra careful with the rivets, they will scratch the after market tint off of your glass and I used the size rivet he stated.
@BroncosandPartsGarageАй бұрын
They don’t touch the glass
@bigjobford19562 жыл бұрын
Love the Videos I’ve done this one,,but hey you always can learn new tricks 👍🏻👍🏻
@BroncosandPartsGarage2 жыл бұрын
I’m still learning too !! Thank you
@bigjobford19562 жыл бұрын
@@BroncosandPartsGarage Your Channels Really Great Chris and helpful for referencing repair procedures and parts availability for everyone,,, but Jeff’s Broncos Graveyard Site isn’t that easy to get use 🤔 and navigate,guess it’s takes time to get use to it Thanks Chris and keep them coming 🏆
@jrorellana4865 Жыл бұрын
Thanks for the great video, I replaced the felts on my 1996 Eddie Bauer edition and the passenger side has a couple of broken tabs so the felt doesn't stay properly. The rivets that you installed didn't interfere with the window or into the door channel? Thanks again.
@BroncosandPartsGarage Жыл бұрын
Glad it helped! They don’t interfere at all.
@joshuacornelius13892 жыл бұрын
Great video!
@BroncosandPartsGarage2 жыл бұрын
Thank you!!!
@CoreyMAGA Жыл бұрын
About to do the outer felts and channel felts on my 85 f150. The channel felts are falling out
@BroncosandPartsGarage Жыл бұрын
It’s a very similar procedure
@butcher06724 ай бұрын
I just installed new window sweeps on my 1997 F250 HD, and noticed a gap between it and the vent window seal, I was concerned. I've noticed the same in your vid here @11:14, is that normal? Could water not get in and sit at the bottom of the door? Thanks, love your vids, very informative.
@butcher06724 ай бұрын
PS, love your fix on the broken tabs!
@BroncosandPartsGarage4 ай бұрын
I went and looked. I don’t thin it will cause an issue. Non Oem parts vary a bit. Doors have drain holes. Also, the sweeps don’t catch all the rain. There may be a little “play” in it as well. Moveable from side to side during install.
@briancazier787 ай бұрын
What holds the window felt in? That's what I've been trying to figure out
@BroncosandPartsGarage7 ай бұрын
The window channel felt/seal is held in with friction. The sweep is attached to door panel on inside and door body on outside.
@patrickparker8024 ай бұрын
My glass keeps coming loose, is the rear track supposed to be loose towards the bottom edge of window opening? Not sure if my metal track is broke or what, but pops out of door tracks when i lower window.
@BroncosandPartsGarage4 ай бұрын
Check the small white square “slide”
@garricksmith9302 жыл бұрын
In the video I noticed you are missing the side mirror glass. I'm sure because you can't find a replacement with the built in signal provisions that the EB and Sport models have. Have you looked into this or located any? What about finding a larger replacement mirror with the arrow and cutting it down to our Bronco size? I'm looking into this but have not figured out what vehicle has large enough glass to cut down to this size.
@BroncosandPartsGarage2 жыл бұрын
The issue is the led’s are red. There is an amber piece of plastic on the back of the Mirror. Prismed so u don’t see the lights when they are blinking. It’s an odd coating.
@rromero1091Ай бұрын
I'm having trouble with the seal for the actual vent window. someone broke into my truck. I bought the vent window. I just don't know what kind of seal to put on the vent. it's the dry seal in it. I installed it and out silicone but you can still hear air coming in
@BroncosandPartsGarageАй бұрын
I sell them used or you can call Jeff Bronco Graveyard in Brighton Michigan. They sell them new. Seals
@rromero1091Ай бұрын
@@BroncosandPartsGarage thank you sir. I'll give it a try
@rromero1091Ай бұрын
@@BroncosandPartsGarage I have the whole assembly. Just replaced the window. but just need that seal around the window to the vent
@kevinlakey96252 жыл бұрын
So I bought some overlays a while back and I’m just now getting around to putting them on my 95 F150 I noticed there’s not as many fasteners and then there’s no pre-drilled holes on the bottom of these do you have any how to videos on those? Thank you tried calling but nobody’s answering the phone
@BroncosandPartsGarage2 жыл бұрын
Sorry, I don’t know much about the overlays. I try to use all OEM door panels
@kevinlakey96252 жыл бұрын
@@BroncosandPartsGarage yeah oem would cost me more than the trucks worth… Thought for sure you guys would have a how to video
@nevinjacobs85772 жыл бұрын
how do the window felts/sweeps fit i got some on amazon and around the curve they dont sit very well it looks ok and they stay in place but they dont exactly fit like factory
@BroncosandPartsGarage2 жыл бұрын
Avoid the “precision” brand. Sadly, Nothing fits like Oem. They take some time working themselves into place. Mine don’t fit perfect either.
@travisotto137 Жыл бұрын
@@BroncosandPartsGarage $36 ebay ones pinch window at curve, seem to be a 1/4" wider and wont allow windo to roll up. Its a discontinued part. Dont know where to turn...maybe the junkyard?!?
@BroncosandPartsGarage Жыл бұрын
@@travisotto137 call jeffs bronco graveyard and ask for their premium house brand.
@travisotto137 Жыл бұрын
@@BroncosandPartsGarage Thanx...after reviewing reviews I found $55 "Fairchild" (made in china) had little complaints on fit. so i ordered and waitIng to attempt install again. " I BELIEVE USING RIVETS FOR INSTALL WILL HELP KEEP TIGHT/SNUG AND AWAY FROM THE WINDOW SO IT HAS A CHANCE TO GO UP AND DOWN AT EASE
@raulangulo63512 жыл бұрын
Do you know where I can get the plastic speaker covers that go on the door panels? and also the black trim that goes on top of each door panel, I just finished a hand crank to power window conversion that’s all I need
@BroncosandPartsGarage2 жыл бұрын
I made a video on how to install these. There are links in the description. kzbin.info/www/bejne/Zn2ZXqacgMycoMU Grab my email from the description and I can set you up with the speaker grills for your door panels
@raulangulo63512 жыл бұрын
@@BroncosandPartsGarage do you have the sweeps? The part you installed in the video I need both sides
@BroncosandPartsGarage2 жыл бұрын
I buy them from Jeffs Bronco Graveyard. Links in description.
@PlazFrenzy Жыл бұрын
I have a 95 f150 but the section on my door panel that the felt sweep is supposed to clip into is completely gone, so pop riveting it is out of the question. Any idea what I can do besides replacing the entire door panel???
@BroncosandPartsGarage Жыл бұрын
Is the entire lip gone or just the area where one of the clips go into?
@PlazFrenzy Жыл бұрын
Almost the entire lip is gone except for one little section but it’s hanging on for dear life.
@PlazFrenzy Жыл бұрын
Also just looked into some of your videos and I’m definitely gonna need one of those “cold air intakes” and the power steering replacement to get rid of that awful noise.
@BroncosandPartsGarage Жыл бұрын
@@PlazFrenzy email me some pics n2kpi@yahoo.com
@PlazFrenzy Жыл бұрын
@@BroncosandPartsGarage will do as soon as it quits pouring down rain here in Texas.👍
@sanjose132 жыл бұрын
Where did you get the led curtesy light from?
@BroncosandPartsGarage2 жыл бұрын
kzbin.info/www/bejne/goKQl5all9ObpLs Links in this video description. Same as dash led
@craigpalmer77472 жыл бұрын
Are these made in USA?
@BroncosandPartsGarage2 жыл бұрын
I believe jeffs Bronco Graveyard sells the precision brand which Are made overseas and they’re own inhouse brand