How to install android car stereo in your lexus gs300 gs400 gs430 DIY

[@marcwilliams7956]

You explain this process better than anyone else. Thank you so much for your insight.

[@Ricardo_Wade]

Appreciate your time brotha, thank you.

[@anthonydelgrosso6518]

Just wanted to say thank you. I’m on my third GS in 12 years. They are timeless, and my favorite car. I’ve always had double din head units in four years of owning this one I haven’t touched anything on the audio. and had a connect at Carson Toyota where I was able to get the oem Toyota double din plate and mounts from Japan, But now have been unsuccessful because I think Toyota stopped making them. This is literally the cleanest modern look you can get without any major modification, and since watching this I have placed an order for mine. Thanks again brother 🤙🏻

[@Ricardo_Wade]

A little late on the response but thank you for your time and response.

[@danieltrowbridge9236]

I agree and have purchased and wired up my new 9” android unit same as this with new 5 channel amp and new 6.5” speakers in all doors and new sub. The only thing I haven’t done is secure the head unit in place. How did you do this? These are so light weight I was honestly considering 3M double sided black double sided tape but I really would prefer to mount with some kind of bracket which mine didn’t come with any as I was told “it is meant to be mounted with screws from behind into a fascia plate for specific cars” which obviously our cars do not have or need. I know this is upset old but please get back to me how you mounted it mate. Love your work legend 👌🏻😎

[@flubyux2]

Just in case someone might not know: installers use a bundled cable called 9 wire. It has 4 channels worth of speaker wire plus an extra one for amp remote signal. Saves a lot more space than running 4 passes of bulky speaker wire over to the factory harness.

[@Ricardo_Wade]

Would be good from trunk to the rear of head unit, this method as shown is good as the wire can be virtually purchased any where vs the 14,16,18-9 not carried in to many places

[@marktalii]

found out my ground was wrong because of this video. thank you, you saved me a lot of stress lol

[@neverlift_official]

Dude, I Wanna thank you! I bought the same one and installed today in my GS. Thank you very much! Love it

[@Ricardo_Wade]

No problem bud glad my video was able to help you out.

[@neverlift_official]

One more question. I have the Subwoofer (Non ML) but no connected. How did you connect that? Sound quality is horroble

[@Ricardo_Wade]

@Dos Santos on my Wide body GS I removed the OEM subwoffer from the deck and replaced it witch a 10" alpine type S, I also used a aftermarket alpine amplifier

[@neverlift_official]

Nice one, maybe I should change the sw too, thanks a lot mate 🙏

[@Ricardo_Wade]

@Dos Santos I have air suspension in my trunk, with sub box I won't have much more trunk space so decided to just do the deck sub as I mentioned

[@danieltrowbridge9236]

I agree and have purchased and wired up my new 9” android unit same as this with new 5 channel amp and new 6.5” speakers in all doors and new sub. The only thing I haven’t done is secure the head unit in place. How did you do this? These are so light weight I was honestly considering 3M double sided black double sided tape but I really would prefer to mount with some kind of bracket which mine didn’t come with any as I was told “it is meant to be mounted with screws from behind into a fascia plate for specific cars” which obviously our cars do not have or need. I know this is upset old but please get back to me how you mounted it mate. Love your work legend 👌🏻😎

[@Ricardo_Wade]

It's all good bro, old or new video I'm still replying with help and info, this link is to my video before this 1 and shows you how I mounted mine with bolts, go to around the 8min mark kzbin.info/www/bejne/gZzIlmaPpNtnjZI

[@danieltrowbridge9236]

OVERKILL GARAGE I agree and have purchased and wired up my new 9” android unit same as this with new 5 channel amp and new 6.5” speakers in all doors and new sub. The only thing I haven’t done is secure the head unit in place. How did you do this? These are so light weight I was honestly considering 3M double sided black double sided tape but I really would prefer to mount with some kind of bracket which mine didn’t come with any as I was told “it is meant to be mounted with screws from behind into a fascia plate for specific cars” which obviously our cars do not have or need. I know this is upset old but please get back to me how you mounted it mate. Love your work legend 👌🏻😎

[@itsnacho838]

Thank you so much! I live in Japan and own the Japanese version (Toyota Aristo) so my AMP is located in the rear trunk unfortunately.. But the wire colors are still the same

[@Ricardo_Wade]

Aristo jz161 very nice, some lexus gs models also have it in the trunk here in the US

[@garydelr5757]

Thank you so much!! You made the install so much easier. Saved me lots of time.

[@Ricardo_Wade]

Glad my video helped out

[@Ricardo_Wade]

@Walichalow Wali the link if in the description in this video I used the 9" model

[@garylayug8058]

Bro you made this install a breeze my G you’re the real MVP! Everything you said was on point! All of the features on my radio works, just gotta figure out how to connect the rear subwoofer

[@Ricardo_Wade]

Get a aftermarket Amp kit with and do an external sub and box wich is what I did

[@garylayug8058]

@@Ricardo_Wade right on! I’m just gonna use the stock sub lol it’s good enough for me! Keep the vids comin! I love my 01 GS300!

[@johnhaxe5389]

This video is very helpful. Saved me alot of time on my stall. Thanks

[@Ricardo_Wade]

Apriciate you for watching glad my video was able to help

[@danieltrowbridge9236]

@OVERKILL GARAGE I agree and have purchased and wired up my new 9” android unit same as this with new 5 channel amp and new 6.5” speakers in all doors and new sub. The only thing I haven’t done is secure the head unit in place. How did you do this? These are so light weight I was honestly considering 3M double sided black double sided tape but I really would prefer to mount with some kind of bracket which mine didn’t come with any as I was told “it is meant to be mounted with screws from behind into a fascia plate for specific cars” which obviously our cars do not have or need. I know this is upset old but please get back to me how you mounted it mate. Love your work legend 👌🏻😎

[@loveit2010ful]

I followed your method but l did find out that the white with black stripe wire is ground on the big wire harness that plugs into the amplifier

[@ВОИН-я3щ]

Bro, I connected an android like yours, but my rear speakers didn't turn on, what did I miss?

[@Ricardo_Wade]

Some wires are similar in color so might just be off by a wire

[@superma585]

Hi, have you tried making steering wheel buttons to work? As the android says it has built in

[@Ricardo_Wade]

Steering wheels buttons and for shifting gears

[@eddiechavez9677]

May God bless you with longevity. Thank you

[@TechTimeElectronics]

Nice video... The reason why its slow is because theres only 1gb ram in it.. I bought the cheap one too thinking it didnt matter. It does. At least 2gb of ram, maybe 4 if you cant find it. Also what year is your GS?

[@Ricardo_Wade]

It wasn't terribly slow for the price it was at the time, this GS was 2003 but the car ended up selling 1 month after this video

[@JDMHaze]

Hey I have a 2000 RX 300 and of course having the same issue there's no plug and play... This video is helping me because I may have to run the wires to the speakers myself, so I'm just curious about the amp situation and wondering if the bypass is required

[@Ricardo_Wade]

Never delt with a rx before but should be the same but maybe different color speaker wire

[@JDMHaze]

@@Ricardo_Wade I got the bypass harness, this video actually helped to explain the issue very well this is literally the closest I've gotten and I'm almost at the finish line with the exception of another video

[@Ricardo_Wade]

@@JDMHaze good to hear

[@devinpariag1574]

This is pretty dope didn’t expect this to look so good. What is the wattage this unit offers? I have really big music setup on mine. Does this have eq settings as well?

[@justinshreeve4871]

Hey man, thanks for this tutorial. Looking at doing this in my GS. I was curious if you ever made a video of replacing the factory amp and sub in the original positions. If it’s possible to significantly upgrade the sound without losing OEM form, I need it, but I’m having a hard time finding videos of the process on here. Thanks again!

[@Ricardo_Wade]

I have not made a video, I ended up selling the silver gs300, on my wide body I do have a 10" alpine type S sub in the factory deck location, it fits with no mods just make sure you add rtv

[@justinshreeve4871]

Gotcha, thanks. Do you plan on making a video of that process? Just ordered the tablet, but still need an amp/sub solution.

[@Ricardo_Wade]

@@justinshreeve4871 I mean it's already done on my wide body gs300 but basically just buy a 10in sub and replace it with the oem sub, for the Amp you will have to go with a after market Amp and wiring kit shouldn't be to terrible on price but you can hit me up on instagram @gs_rick and I can help with any questions you may have

[@justinshreeve4871]

Thanks man. Yeah, I just followed you on Insta.

[@michael-anthonysaunders9266]

Hey man I appreciate the help made it much easier but I was wondering do the harness for the radio come with the radio or you ordered it?

[@Ricardo_Wade]

Every new aftermarket radio comes with its own new harness

[@michael-anthonysaunders9266]

@@Ricardo_Wade I appreciate thank you

[@Ricardo_Wade]

@@michael-anthonysaunders9266 you got it boss, let me know if you run into any issues

[@ShadowStreamMedia]

Did you need a bracket to hold the screen in? If so, which one did you buy?

[@Ricardo_Wade]

I used a mixture of the oem radio braket and the the ones that came with the new head unit, I show how I did it the previous video

[@fabiopalaio7964]

u saved my life earned a sub

[@Ricardo_Wade]

Appreciate that bro will be doing more how to mods on the gs very soon

[@joecox9958]

Best thanks! But would you mind to tell us do we need extra dash kit, does it fit very well on 05 GS300? at the end you said need to shim? I get you just pull out two connectors on factory power amp and wiring the connectors to Android unit right?

[@johnmetzler3864]

Great video and we'll explained. My only question is why does my gs400 not have a grey wire. I used a volt meter to check for the acc (12 when car is in acc mode) but no success. Any ideas?

[@Ricardo_Wade]

Maybe blown fuse?

[@codykellogg3945]

Best video out for this install just got a sub from me for it

[@Evar4life]

Hi Bud! Great video, can you please advise how you mounted the tablet to the console? Is it only snug in there or did you screw it in?

[@Ricardo_Wade]

There is another video in my Playlist with the similar thumbnail check out that video and I should how I mounted it to the oem brakets

[@Evar4life]

@@Ricardo_Wade thank you!

[@Pallidus_Rider]

Looks like a good fit - seems custum. 👍

[@RJ-pi1dz]

Very nice bro..question what size screen is that you have..also can you use a remote for the screen instead of happen to only control it through the screen only..

[@Ricardo_Wade]

No remote with this one bro, this one is a 9" link to it is in the description, appreciate you for watching

[@luisshipps4205]

Really nice job on the screen could you show a video of de 10 inch that you have on the other GS I am planning to order one. And I would like the bigger screen.

[@georgethomas3763]

Hey, Rick how can I get in contact with you. I have a GS 400. I would like to get the same stero install.

[@Ricardo_Wade]

@@georgethomas3763 Instagram, gs_rick

[@foodforthought872]

Hey Rick i luv what you did. Has anyone found an "UPGRADE" to the 98-20 Navigation system?. Thxs

[@Ricardo_Wade]

This would work for the 98-05 I know Phoenix makes a tesla style screen for the 06+

[@foodforthought872]

@@Ricardo_Wade ....... I have a standing alone Navigation system. (If) I put in the New touch screen then I WILL NOT have any Air conditioning or Heat😖. How do we fix this my Friend ?. HELPPPPP 😵‍💫

[@Chef16cd]

What brackets are used to mount the android? I just bought an 01 GS300 and plan to upgrade the stereo. Thanks

[@Ricardo_Wade]

It shows in the video, I used the ones that cane with the android itself

[@Chef16cd]

Disregard, I was not aware there was a part one. Thanks

[@michael-anthonysaunders9266]

I got another question man how do you install a skar sub with this? And the harness only has one line out sub

[@Ricardo_Wade]

Sorry for the late reply, but installing a sub is just like any other head unit, you need an amplifier for your sub and obviously a sub in a box and a amplifier wiring kit wich contain all the wire to get the amp powered on and rca cable that run from head unit to amp, on the headunit there is a rca out put labeled sub, that's where you land the rca for the amp

[@TooShortPants]

do I need to replace the factory subwoofer if I have a gs400? is it the same process?

[@Ricardo_Wade]

Gs400 would be the same process, with this method you are canceling out the factory amplifier that's also means you lose audio to the factory sub, on this silver gs300 I added an aftermarket amplifier and replaced the factory subwoffer with a alpine 10in subwoffer, the 10in fits perfect in the factory location and handles more power

[@joecox9958]

Also I think GS have subwoofer? does your wiring still support subwoofer? how to you wiring back camera from front to back trunk?

[@Ricardo_Wade]

No the subwoofer will no longer be operational, the alternative I did was upgrade the woofer and install a aftermarket amp, I never got a round to installing the camera since the car sold

[@jonathanberrien716]

You said there’s an apple version where can I get that?

[@TaliaAKALOVEABLE]

Why did you run new wires for the speakers, doesn't the factory ones work (pink purple etc)‽

[@Ricardo_Wade]

I ran wires from the new radio to the speaker input plug at the amp, older cars did not have amp just a radio wich is why all the speaker wires were at the rear of the radio, in the lexus they only go to the amp wich is why I had to run new wires from the new radio to the speaker/amp plug

[@whowantsomeofdebo8289]

does radio have a front camera feature also

[@Ricardo_Wade]

Different purposes, on my Wide body I have a front facing camera pointing down, this allows me to see how far away my front lip is from a curve before I lower the car to the floor, on my raptor, ford put it in the grill so when your climbing a steep hill and your pointing to the sky the camera will point down or leveled so you can see the terrain or what at the top of the hill when you physically can't, but you can use it in any way you want

[@altezza2jz]

Summer project for me. Thank you sir!

[@BrandonJagger]

Can you still do this if you have the navigation ML radio? I have a 05 gs300

[@Ricardo_Wade]

Yea you would just need to get a non gps climate from eBay and u belive the Amp is located in the trunk

[@BrandonJagger]

@@Ricardo_Wade ok cool thank you so much

[@mod13]

I see a few newer 9 inch models on Amazon since this video has been posted. Should those fit the same exact way? They look almost identical

[@Ricardo_Wade]

Not sure I havnt purchased the newer version but there should be some dimension listed on both for you to compare

[@mod13]

@@Ricardo_Wade you didn’t need any harness or anything after scraping down the ashtray?

[@Ricardo_Wade]

@@mod13 nope everything you will need will come with the new head unit other than that you should be good

[@collinstephen7930]

Link for the dashkit? Or does the radio come with one?

[@Ricardo_Wade]

kzbin.info/www/bejne/gZzIlmaPpNtnjZI I show how I did it in this linked video, there is no dashkit needed

[@mrdowntwoburnone8985]

Bro u rock thank u

[@dave3uz74]

i have a mark and levinson system and the amp is in the back. is the process similar to this as far as wiring?

[@Ricardo_Wade]

Yes but your speaker wires from the head unit will obviously be longer since you gotta run them to the trunk

[@jay-uh3pk]

Is there an Apple car play screen that will fit the GS

[@Ricardo_Wade]

I am an android user i wouldn't know of one, but if you click the link that I have in the description for this model it specs Apple car play, might be a 3rd party app but I know this screen was more motivated towards ios user base

[@caidiaz9454]

Awesome video

[@Ricardo_Wade]

Appreciate you watching bud

[@cowboy6187]

This is the most detailed video I've found. About to work on it now. I'll update on how it goes. Btw i have the exact radio. Hope this go well😂

[@Ricardo_Wade]

Good luck with the install dont hesitate to ask if you have any question

[@cowboy6187]

@@Ricardo_Wade I'm stuck. I added an eq. Everything work until i hit VIDEO than i lose power to the eq.

[@Ricardo_Wade]

One of your eq wires is hooked up wrong

[@cowboy6187]

@@Ricardo_Wade that's what I'm thinking. I have it grounded to the chasis like you showed in the video. Getting power from the blue/yellow wire and the remote is hooked up the the radio remote.

[@Ricardo_Wade]

@@cowboy6187 check with a test light if remote wire from radio has power while in video

[@Ravin.c.J]

I bought a 99 gs300 but the wiring is all messed up from a previous owner. The speaker wires arenall missing. There is a blue plug and a orange plug attached to a white thing on the left side of the blower motor but the orange plug has nothing plugged in, i was wondering if the speaker wires are supposed to be plugged in there. If so, couldnt i just take apart the plug and use the wires from there?

[@Ricardo_Wade]

Send me some pics via Instagram @gs_rick

[@2012DJHOLLYWOOD]

Hi, Nice setup. Do you have the link for this 9inch android?

[@Ricardo_Wade]

Link is in the description

[@SloppyJoe671]

So I'm replacing my old double din player with this unit, surprisingly the old power harness plugs right in and powers the new hikity unit. My problem is figuring out the sound connection . The system has an aftermarket amp and sub which has RCA jacks connecting to the old unit. How can I connect it to the new hikity unit?

[@Ricardo_Wade]

Do you have 2 amps 1 for highs and 1 for subs?

[@SloppyJoe671]

@@Ricardo_Wade yes I have 2 amps for subs and highs

[@Ricardo_Wade]

@@SloppyJoe671 ok so you can skip this bypass and not hook up any speakers to the head unit, instead hook up to the rca outputs, the head unit only has 1 sub output female rca, you will need to buy a rca splitter 1male end and 2 females ends

[@whowantsomeofdebo8289]

i need to know the model of your android radio. and do you have to lose the factory amp and sub woofer

[@Ricardo_Wade]

It's in the description

[@joserm6823]

By any chance can we just inpin some of the wires on the plugs from the amp and make them match the wiring harness?

[@Ricardo_Wade]

You would have to color search on our gs there is 3 variations i belive

[@joserm6823]

@@Ricardo_Wade damn. Is there any where to find it all 3 variations?

[@Ricardo_Wade]

@@joserm6823 you would have to remove your oem radio and figure out the brand most are pioneers

[@joserm6823]

@@Ricardo_Wade is there away i can contact you directly?

[@Ricardo_Wade]

@@joserm6823 instagram @gs_rick

[@MA-it3ps]

Is it possible ot do a double din install on GS models with Navigation? I've tried searching online but couldn't find any info.

[@Ricardo_Wade]

Yes but you will need to to buy a non navigation model climate control and then follow the way I did it from there on. The climate is built into the navigation unit on your model at the time

[@MA-it3ps]

@@Ricardo_Wade Yesssss I'm so glad. I'm going to check out a '98 GS400 with 88k and was worried I'd be stuck with the ugly navi screen lol

[@Ricardo_Wade]

@@MA-it3ps it defeatly can be done ✔

[@luisvina2848]

I just received the same radio yesterday, And I install it looks perfect fits grate only thing is my amp is not behind the glove Box. It's in trunk, does this radio need a amp in order to hear the sound or can l just Connect speakers 🔊 to it. Having got to that point yet that's why I'm asking.

[@Ricardo_Wade]

Did you originally have the oem gps?

[@Ricardo_Wade]

No i did not i had a factory pioneer unit, if you wanna run this screen from a oem GPS you will need to purchase the non gps climate from eBay or salvage yard

[@Ricardo_Wade]

No i did not but you can get the non gps climate from eBay or salvage yard and run this screen

[@pac8447]

Does it matter what speakers go with grey or purple etc. or any order is fine?

[@Ricardo_Wade]

Not really long as both paired colors go to 1 speaker Example: solid grey and grey with black stripe go to driver door Solid white and white with black stripe go to passenger door etc.

[@sfgiants49ers415]

Whats the difference between the light green wires for the front right speaker and illumination?

[@Ricardo_Wade]

They look the same color but different thickness the light green behind the radio is thiner and that just tells the radio to dim when the headlights turn on, if you don't connected the brightness will be the same day or night lights on or off, the light green by the stock amp is 1 of the wires leading to door speaker

[@sfgiants49ers415]

Ricardo Wade thanks

[@Ricardo_Wade]

@@sfgiants49ers415 no problem

[@eljoker4247]

i have Illumination wire and Antenna remote wire i have to connect to my oem radio harness do you happen to know which one they are

[@Ricardo_Wade]

Illumination wire is so the radio dims when you turn the headlights on Antenna remote wire if for your aftermarket amplifier

[@BigMikeDeeSqGuy]

Good evening sir where did u get your catalytic converter from and which one did u purchase??

[@Ricardo_Wade]

DEC exhaust manifold with integrated catalytic converted, bought it on eBay brand new

[@Shayan-lo8rj]

Would a 2000 Lexus LS400 have same fitment?

[@Ricardo_Wade]

Not sure, I have only tried on the gs

[@leeschritter2860]

You kick ass. This helped so much.

[@Ricardo_Wade]

Glad it helped appreciate you for watching subscribe as I will be adding more content in the near future with most gs mods and hacks

[@chicago1680]

I seen another video where they just used the harness and connected it to the factory harness from the amp area. They only used that grey wire. May i ask why you didnt do that or am i missing something? Thanks

[@Ricardo_Wade]

The 2gs had 3 diffrent variations of harness and radios, my amp output to the speakers is located at the amp behind the glove box not the rear of the stock head unit wich is why I did it how I did and has worked on several cars I've done in the past

[@chicago1680]

@@Ricardo_Wade ok thanks

[@HOTRODRICO]

so once you put in the aftermarket radio... the stock sub can not be used anymore? there's no way at all to use it ?

[@Ricardo_Wade]

Unfortunately you lose the sub function, the sub is powered by the oem amp when adding aftermarket head unit your eliminating the oem amp along with sub, on my wide body gs300 I added a aftermarket amp and replaced the oem sub with a 10" alpine type s sounds 10 times better than stock

[@1970chevy]

Made this way more difficult then needed to be. Buy the adaptor harness.

[@Ricardo_Wade]

There is no official plug and play harness for the 2gs platform

[@cruxinterfaces]

Nice work, you should try using our products on your vehicle Thank you for the content

[@abdiassin1631]

Show us a link

[@Abdullah_Alfayez]

I own like this car and I want to install a Pioneer avh-w4500nex on it, but I have a question, if I canceled the factory amplifier like you did in this video, would that make the sound better or worse?

[@Ricardo_Wade]

It's defenatly louder, in my wide body, I have avh4400 with 2 10" alpine type S the head unit puts out good enough highs with the oem speakers, the oem amp mainly drives the oem sub woofer

[@Abdullah_Alfayez]

@@Ricardo_Wade what about the sound quality?

[@Ricardo_Wade]

@@Abdullah_Alfayez the w4500 is a good unit it will pump up better sound than the oem head unit, I myself added a alpine amp and a 10" sub to the deck, any 10" sub will fit in the same place and give you a better sound without a box unless a box is a option, I would defenatly get one

[@Abdullah_Alfayez]

@@Ricardo_Wade thanks man ♥️

[@Abdullah_Alfayez]

I’ve ordered the 10” alpine type s 2 ohm and 1100w boss amp 2/4 ohm, do you think it will work properly ?

[@rubendurandis1796]

Question: if I get a replacement sub, I can just plug it right in or do I need to also buy a new amplifier ?

[@Ricardo_Wade]

You need a amp as well, the amp you would connect as you would any, Red to batter fused, black to chassis, and blue to remote on the radio

[@rubendurandis1796]

@@Ricardo_Wade so is there no way to connect that blue remote wire to the factory sub?

[@Ricardo_Wade]

@@rubendurandis1796 not that I know of, assuming you can now you gotta get the radio tied into the amp it's easier to just buy a amp off Amazon on the cheap and replace factory sub with a 10", it fits in factory spot

[@rubendurandis1796]

@@Ricardo_Wade bet. Ima do try to get something

[@rasaimarshall5493]

I got the radio working but no sound and the amp already looks bypassed anything you can suggest?

[@Ricardo_Wade]

Has to be something to do with speaker wiring

[@luisvina2848]

Does the radio have enough power to push for speakers

[@Ricardo_Wade]

Yes I have it on both the silver gs and I also have the 10" model on my wide body gs both seem to push the door speaker well and I listen to my music pretty loud

[@mcygwada]

thank you good job 👍🏽👍🏽👍🏽

[@Baltobd03]

Nice video clean look enjoy bro. I can’t wait to do mine like that too.

[@Ricardo_Wade]

Thank you apriciate you taking the time to watch I will be doing 2 give aways for subscribers very soon just waiting on the screens to get here in the mail tommorrow.

[@Baltobd03]

Ricardo Wade that’s awesome, can’t wait to see more videos. Hope you get a lot of subscribers too.

[@BayAreaWrecker]

Do you have a link for the cats

[@Ricardo_Wade]

I bought it on ebay, the brand is DEC, I just checked the seller I got it from is out of stock on it.

[@williamrivera2421]

does it have carplay?

[@Ricardo_Wade]

It's been a while since I've messed with it, but I belive its just normal 2 way bluetooth, it will still tell you the name of the track on the screen and you can can change tracks back and foward, directly from the radio

[@noodlesaredelcious]

Yo just used your wire guide to do my stereo but do you know which wires are for the rear subwoofer ?

[@Ricardo_Wade]

Unfortunately you lose the rear subwoofer when doing aftermarket radio on these GS

[@noodlesaredelcious]

Ricardo Wade turns out you can tap the wires from sub to one of the speakers then you gain the sub but nothing too deep

[@Ricardo_Wade]

@@noodlesaredelcious well yes you can wire it like that but your putting more load on that 1 output and run the risk of burning it out, you can just buy a cheap amp off offerup or craigs and wire it that way

[@jaemealz184]

Hey what’s up dude I have a question? Do you know the wiring diagram off the harness that runs from the back of the radio

[@875daily]

So there is no wire harness to buy to plug and play? You have to cut wires? I’m deathly afraid of wires lol but need this in my GS after 15 years

[@Ricardo_Wade]

Unfortunately there is no direct harness for our cars, I went into lengthy detail on this video to give viewers like you the confidence to do it, I understand many are a bit scared of electrical but if you follow this video you should be successful just be sure to dissconnect the ground terminal from battery prior to starting

[@875daily]

@@Ricardo_Wade Thank you. It definitely looks doable. Appreciate the videos. I was asking on the FB groups for a good video. Thanks for your time in doing this install.

[@Ricardo_Wade]

@@875daily if you have any questions feel free to ask, I'm pretty good with replying on here

[@875daily]

@@Ricardo_Wade thanks appreciate it

[@875daily]

@@Ricardo_Wade I just realized after revisiting your video o have a 400 with the Nakamichi stereo which means the amp is in the trunk. There is nothing in the glove box on a GS4. Will wires need to be extended to the trunk? Also, don’t you have a instagram account? You make custom car parts? thanks again

[@anastasijaozerska5035]

Done exactly as u done to the last detail and still no sound i have the oem GPS unit i got the different climate control but just no sound

[@anastasijaozerska5035]

Any reason why there's no sound?

[@Ricardo_Wade]

@@anastasijaozerska5035 could be a faulty unit, I did have 1 person message me on Instagram and turned out the new head unit audio outputs were not working outta the box

[@jagrajsingh4873]

Why cant i keep the stock subs and the stock amp workin and also run an aftermarket sub and amp at the same time?

[@Ricardo_Wade]

There is no way to to wire the aftermarket radio to the factory amp and the stock sub is wired to the amp so that's the reason, you can wire the door speakers directly to the radio and they are actually louder than with the stock amp you can get a amp to run the stock sub or just replace the stock sub with one in a box

[@4emudd63]

Where did you get ground wire from

[@Ricardo_Wade]

It's just a wire nothing special about if that that's what you are asking as for grounding location any chasis metal is a ground, o grounded behind the glove box

[@BigMikeDeeSqGuy]

Are u running stock speakers on both cars?

[@Ricardo_Wade]

The wide body has infinity door speakers with mb quart tweeters and the stock sup has been replaced with a 10" alpine type R sub, I didn't do a box in the trunk since I have a air suspension managment and still wanted some trunk room

[@deerayboss4210]

Do I need any special mounts

[@Ricardo_Wade]

No I used to factory radio ones just drilled some new holes and done

[@gogetabag1873]

I just got a Lexus gs400 with 280,000 miles how long u think it would last in mileage?

[@Ricardo_Wade]

Congratulations, I've only had a gs400 for a few months most of my long term gs have been 300s with inline 6s (2jz) the (1uz) has been known to be very reliable as long as you up keep it .

[@larentusbrown4443]

Where did you get the harness?

[@Ricardo_Wade]

Wich harness exactly?

[@larentusbrown4443]

The harness that connects to aftermarket harness to connect to factory harness. To be able to put aftermarket radio in

[@Ricardo_Wade]

@@larentusbrown4443 just watch the video bruh, I never used a harness because they don't make harnesses for the gs300, gs400, gs430 that's the whole purpose of the video

[@GoldBlooded_21]

would this work on a 99 ls400?

[@Ricardo_Wade]

Never had an LS body boss so don't wanna give you wrong information, but I'm sure some tweeks here and there, it should be possible.

[@rockstarauto4807]

What if the amp is in the trunk?'same set up?

[@Ricardo_Wade]

Same set up just gotta run the wire longer

[@rockstarauto4807]

@@Ricardo_Wade didn't work. I had to run the wires straight to the speakers and disconnect the A connector on the amp

[@andrewgerena5447]

Hey what wiring harness did you use?

[@andrewgerena5447]

And what gauge ground wire did you use?

[@Ricardo_Wade]

I did not use a wiring harness there is no wiring harness that will be direct plug and play i encourage you to watch the entire video and you can see how i wired it up

[@andrewgerena5447]

Ricardo Wade cool thanks but what gauge ground wire did you use?

[@Ricardo_Wade]

@@andrewgerena5447 I'm not sure since it was some months back, I belive it was possibly a 16guage you can look at the wires on the radio harness and it should state what guage that is, i would go 1 guage lowere than what the radio is for example if the radio wore is 16awg I would run a 14awg.

[@andrewgerena5447]

Ricardo Wade hey I was doing this install and so far I’ve got the radio wired up and grounded and I ran speaker wires to my glove box like you showed.. but my car does not have a factory amp behind the glove box. Are you familiar with them coming without a amp and do you know any other way I can locate the cables to complete the install?

[@johnathanrobertson1600]

What kind of radio is that

[@Ricardo_Wade]

Android car radio, basically like a phone in your dash

[@DGC904]

What cat u bought?

[@Ricardo_Wade]

I bought it off Ebay the brand manufacture is DEC EXHAUST MANIFOLD it's the cheapest one I found that was California compliant

[@HustleTownUSA69th]

Cannot install a radio in my 98 gs 400. Radio is navigation with the screen. There is no harness for it

[@Ricardo_Wade]

There is no harness made for the GS that is direct plug and play thats why I made this video, if you wanna put a screen like mine you gotta buy the non GPS climate control then install an aftermarket radio

[@traviancrowder32]

What model android is the radio

[@Ricardo_Wade]

Link to the radio is in my description, you should be able to get all the info and specs from there

[@blacknwildd]

Does it still connect with iphone

[@Ricardo_Wade]

Yes will connect to any iphone via Bluetooth

[@mrdowntwoburnone8985]

I do have a few questions

[@Ricardo_Wade]

What's your questions?

[@pac8447]

No update?

[@Ricardo_Wade]

Ended up getting a offer on the car a few days later and sold it, did you need certain info?

[@HonchoGaming4]

Now how do I add subs to this

[@Ricardo_Wade]

Just like any other aftermarket head unit, buy a amp installation kit, a amp of choice and sub

[@tejannedaniels9498]

So did the ash tray fit back under the new Android radio?

[@Ricardo_Wade]

It had to be shaved a bit, I did it using a grinder with a flap disk, sorry I havnt updated a video but easy to do there is a metal support just shave the plastic trim until even with the metal support

[@TheMuzikall]

Ashley Cole🥳..whatever happened to the Millions of ££££???🤣

[@MauroGomez-de5iy]

What size is that screen that's fat

[@Ricardo_Wade]

@MauroGomez-de5iy this one is the 9" link is in the description

[@ЖаннаТабынбаева-т5с]

Подскажите пожалуйста размер Андройд

[@Ricardo_Wade]

@@ЖаннаТабынбаева-т5с English?

[@theflipflopfabshop]

what size is it?

[@Ricardo_Wade]

This one is a 9"

[@theflipflopfabshop]

Ricardo Wade how pairs of rcas does it have for speakers? i have an aftermarket amp that i want to run for the front doors and subwoofer so i need atleast 2 pairs but i can’t find any information on how many rcas there are.

[@luisvina2848]

Ok thanks for your help

[@luisvina2848]

I connect one of the channels of the radio to a speaker a separate speaker that I have. And I hear nothing play is there something I have to do to the radio so that I can hear the sound.

[@bobbyserchion]

Dog I think you don't know what the hell you are doing 😂

[@Ricardo_Wade]

I know exactly what I'm doing, I'm just bad at doing it on camera 😂