How to install Apple Carplay Android Auto Jeep

[@BOLOTVTHEVILLAGE]

where can i get this part and how much is it ..thank you in advance

[@LuisCarlosMunoz-i7u]

Hello! Where can I buy this unit?

[@Henriqueverri]

I have this equipment in my 2015 Grand Cherokee, but I couldn't get the original camera to work, is there a video explaining which wires to connect to make it work?

[@dreanof]

I installed the kit in a 2016 Durango and the OEM backup camera does not work in Carplay mode, my daughter's 2014 Grand Cherokee works in both modes - make sure that DIP Switch #8 on the interface module is properly set (should be ON)

[@Henriqueverri]

But in the grand cherokee did you have to connect a cable for the camera to work or just pin 8?

[@محمدالحاتمي-ي5ش]

How can I get this add on or this part you added? Mine is 2015 Jeep Grand Cherokee. Thank you!

[@trucusolutions4455]

Hello Mate, I installed it, I got it off AliExpress.

[@huguesnazaire2013]

How do I buy it

[@The1thegodfather3]

Would this be the same process for a Dodge Durango 2014?

[@trucusolutions4455]

It should work as long as It has the same unit

[@yfaqo]

fits 2015 jeep grand cherokee limited ?

[@trucusolutions4455]

Yes it does

[@tiagoreis2096]

Hi mate Did your factory reverse camera turn on when it's on carplay? Mine didn't show up, i need every time go back to factory system to see the camera

[@trucusolutions4455]

Yeah mate it should automatically switch from the Applecar system to the rear camera, make sure your hardness has that connection

[@AubinAutoDiy]

Hey man. I got it to work. Video is coming soon. Thanks a lot

[@zackpilger3623]

Can you control the temperature and fan control while in car play?

[@trucusolutions4455]

Hello mate, no unfortunately you need to exit and CarPlay mode to change the fan speed.

[@jtrejos83]

Hi Where did you the motherboard from? Is there a sit to purchase?

[@trucusolutions4455]

Hello, I got it from Ali express, Just found this amazing item on AliExpress. Check it out! AU$508.20 40％ Off | JoyeAuto Wireless Apple CarPlay For Jeep Grand Cherokee XJ KL Wrangler 2014-2018 Compass Commander Car Play Android Auto Mirror a.aliexpress.com/_msTMTYO

[@alexanderkyle]

I am having trouble with not being able to switch between CarPlay and the original system, and my backup camera doesn’t show up in CarPlay :(

[@seif.belhadj]

You 've to switch pin number 8 at the back of the module to on if you 've an oem camera, if you can't switch using the steering wheel switch button (long press) try to plug the provided switch and retry, i installed mine yesterday on a dodge challenger, seller recommended the WJJP-1 for jeep cherokee the oem switch didn't works but that's another case for dodge, in cherokee models should works fine

[@AubinAutoDiy]

Hi there. I have a 2016 dodge charger sxt with the 8.4 inch uconnect system, do you think this carplay would work for mine? It looks like the connectors are the same. If you could let me know whenever you can I would appreciate it. Thank you in advance

[@trucusolutions4455]

Hey mate, it should definitely work, it is basically the same infotainment, just make sure all connections at the back of the unit are the same, main hardness should be 54 pin connector.

[@AubinAutoDiy]

Ok. Thank you for responding. I will give it a try

[@trucusolutions4455]

@@AubinAutoDiy no worries mate, any questions let me know. happy to help

[@trucusolutions4455]

Here is the link for the module if that helps mate. www.joyeauto.com/product/joyeauto-wireless-apple-carplay-android-auto-interface-for-dodge-uconnect8-4-2014-2017my/

[@AubinAutoDiy]

@@trucusolutions4455 Thank you. I sent an offer to someone on Ebay for the one that says for Jeep Grand Cherokee. Hope I hear from him soon

[@fokusekfokusek2498]

I bought uconnect 2019r for my jeep 2014 and everything Works

[@troyc.8084]

Hi Daniel I just tried to install this same system in my 2017 jeep cherokee and I had a couple of questions: 1. Can you switch between the module and the normal system using the steering wheel controls? (mine only works with the button) 2. Can you see the backup camera while reversing in Carplay? (mine will not work) 3. How is everything working now after 5 months?

[@trucusolutions4455]

Hello Troy, yes mate you should be able to switch between the 2 systems, you need to long press the middle bottom that's behind the steering wheel on the left side, you should have a bottom for up, down and a round middle bottom, long press on that and it should switch between the 2. Yes the camera should activate automatically once it is on reverse and when you put it on drive after you reach 10 to 15 km it should deactivate. Everything is pretty good, however I never got the mirroring to work correctly, it is very blurry and the streaming quality it is not great and whenever I get it to work (after multiple attends) it looks ok, but it is very laggy, that part is not good, but I never really use mirroring, other than that pretty good. If you are still having issue let me know, happy to help.

[@troyc.8084]

@@trucusolutions4455Daniel I appreciate you getting back to me about this and I suspect that the reason why mine does not work has to do with my vehicle being American left and drive vs what you have in Australia. Somehow Jeep must have changed things between the two versions. I say this because I saw a review on Amazon about the joyeauto wjjp-1 and they had the same issues I am experiencing. So it may just be for Australian vehicles.

[@trucusolutions4455]

No worries mate, happy to help, maybe give it go using the right side instead, it is worth a try.

[@PaulRouillard]

Troy, I just installed mine and the steering wheel long press did not work either. You mentioned "(mine only works with the button)"... what button is that? I can't get mine to work at all. Any help appreciated.

[@troyc.8084]

@@PaulRouillard Hi Paul my unit came with a small square button that I had to attach to my wiring harness. If you have the diagram you should see it. Unfortunately I can not post a picture of it here in the comments but if I find a video I will link it.

[@eliezergomez4140]

Do you know the dip switch setting for a 2016 Jeep Grand Cherokee? Also I connect the switch button to turn on and off carplay but its not working. Any idea on the issue ?

[@trucusolutions4455]

Hello mate, usually the dip switch configuration comes on the instruction sheet, however the dip switch on the one installed only controls the screen resolution.

[@A7mad3aref]

Unfortunately for me it doesnt display anything after connecting the addon board it shows only white screen or some stripes i tried everything and checked all cables are tight but no use when u connect back the original setup its working fine …

[@trucusolutions4455]

Are you able to see a Bluetooth connection and connect your phone? Have you also tried to connect using a USB cable?

[@AubinAutoDiy]

Follow my Channel. I'm going to post a video of it soon.

[@A7mad3aref]

@@trucusolutions4455yes i am able to see uconnect bluetooth name and it connects to it but the screen stays blank white or black so its something related to the display i guess coz i even had a call by chance and i can hear it ringing on the car speakers but nothing appears on the screen at all not even in reverse where as when i put back everything as it originally was it works fine back again

[@A7mad3aref]

@@AubinAutoDiy whats ur initial thought about it ? Is it uconnect version related or wiring related ?

[@AubinAutoDiy]

@Ahmad Aref Hey man. What I can say about it is that as long as you have you an 8.4 uconnect system, it should work. What I did was when I was watching a video of it been installed in a Jeep grand Cherokee, I looked to see how many pins there are in the big main wire that plugs in the of the head unit. I saw that it was the same number of pins as the dodge charger. So I decided to order it for my charger and it works. But doing the installation, it did not display anything for me at first either. I had to take the head unit apart again. And I reconnected the interface plugs again properly. Then plugged it back to the car and it turned on after long press the small button came with the interface, it went to a different page. But before it was ready to use,I had to go under setting to turn on a Bunch of stuff on. Like the wireless carplay, Bluetooth, android auto, turned off the master volume because the sound was awful with it on. Then it was already to go. So if you want to watch my video you can see how I put it together.

[@jopensnewsnetwork]

U need 2 do more videos

[@RoughRaiders13]

What a joke. This "module" is $500...... If you're going to spend that much you might as well just get the Tesla screen radio and have a much nicer display.$500 for a module to add two apps is absolutely ridiculous.