You hit me for a 6 with your educational video, this one certainly scores a century
@agathemctrusty2907Ай бұрын
Best tutorial I've seen in years! Very well done!
@Bouskaj75 ай бұрын
Excellent tutorial!!! Impressed.
@thardir3 жыл бұрын
Sir Donald is pretty handy with those tin snips
@metalroofing72103 жыл бұрын
Thanks Jimbob351. 20 years of practice 😃
@jeannoelmolbwet7850 Жыл бұрын
I'm from Vanuatu, you doing the great job 👏 is helping me a lot tankyou.
@bp498810 ай бұрын
just what i needed to see .... top man
@harryharris7663 Жыл бұрын
superb tutorials thank you
@caidenstuart65892 жыл бұрын
Cheers Dazza, gotta do this on the weekend, knew you’d have a video to give me a crash course 😂😂🤙🏾
@poilkjmnb9876549 ай бұрын
Brilliant video. Thanks
@MetalRoofingOnline7 ай бұрын
Glad it was helpful!
@markrhodes96325 жыл бұрын
Damn good. Great videos and very helpful.
@MetalRoofingOnline5 жыл бұрын
Thanks for the feedback - so glad it was helpful for you!
@bernardmccann76763 жыл бұрын
Best video out there thank you
@MetalRoofingOnline3 жыл бұрын
Thanks so much - hopefully it was able to help you 😀
@shayleefuller12543 жыл бұрын
Helped so much thanks
@metalroofing72103 жыл бұрын
😃
@kyliewright72264 жыл бұрын
Very helpful thank you. Better than the instruction we received from the supplier of our flat pack structure..
@metalroofing72104 жыл бұрын
Kylie Wright. Thanks Kylie 😃👌
@stephenkeeffe49402 жыл бұрын
Yes, same for me. Excellent details. Wish I'd found you before I started. Am able to apply your techniques to the remainder of my project. Many thanks @MetalRoofingOnline.
@isobelpotter8263 жыл бұрын
Really helpful. Many many Thanks
@metalroofing72103 жыл бұрын
Hi Isobel. 🤙🙂 cheers
@mikefirthy3 жыл бұрын
thanks .......champion
@mickbanovic70144 ай бұрын
how do you do a skillion roof corner ?
@pamdegroot9066 Жыл бұрын
Can you show a barge roll cap over barge board, gable roof and fitting the capping around a finial?? can't find that detail anywhere.
@alexanderstevens1454 жыл бұрын
Pale eucalyptus nice colour. Rolled colonial barge next 🖒
@metalroofing72104 жыл бұрын
Alexander Stevens. 😀 I’ll see what I can do 👍 regards Daz
@alexanderstevens1454 жыл бұрын
@@metalroofing7210 thanks man 👍 working out a rolled bullnose the other day did my head in
@danehorua67812 жыл бұрын
Can yous please do a video on how to install the tray that goes on the gable end under roof tiles?
@MarkTerrelLimjoco Жыл бұрын
whats the thickness of barge capping?
@mitchellquinlan61693 жыл бұрын
Hey mate what kind of sds chuck drill bit is that your using?
@xrlent122 жыл бұрын
Great videos. What is the purpose of the hook. I'm using trimdek for both wall and roof. Do I need the hook.
@ambush753 жыл бұрын
Great video, but is that a real Banksy in the background???
@metalroofing72103 жыл бұрын
Hi Ambrose, Thanks for noticing my attempt of a Banksy painting 🤙 when I’m not on a roof I do like to relax by painting 😀
@ambush753 жыл бұрын
@@metalroofing7210 well done!! Lots of talent!
@paulmcnulty6412 жыл бұрын
Perfect for my steel roof project. Tvm. Quick question. I used a damp proof membrane over marine ply wood and then put the steel roof over the dpm but im getting mold on the inside of the ply wood. Where do i apply insulation? Between dpm and steel roof, between dpm and ply, or inside shed and apply to inside ply wood? Thanks
@isobelpotter8263 жыл бұрын
How does the capping interact with the ridge capping? This roof doesn't seem to have one?
@metalroofing72103 жыл бұрын
Hi Isobel. The roll top ridge is the last part of the roof to be installed. There is another video that we have done for this 🤙🛴
@TheBrodienicolosi3 жыл бұрын
Hey mate do the Ridge caps have to be scribed in or can you leave them uncut
@metalroofing72103 жыл бұрын
Hi Brod, It all depends on where you are located and the regulations in your state. 👍
@rizalshahrazali18672 жыл бұрын
Do you have a method statement for the installation?
@jonathanrashleigh87714 жыл бұрын
Thanks for these informative videos. Can I ask how you do it when the quad gutter butts into the fascia board I.e. the board runs and extends past the stop end of the gutter?
@metalroofing72104 жыл бұрын
Jonathan Rashleigh . Hi Jonathan. Great question, you need to use an extra length of barge capping along the straight section, bend down the far side to make it neat and join up the other side with the barge that runs up on the angle. 😊 regards Daz
@dangauci2 ай бұрын
Thanks. FYI - It's actually a requirement in AS 1562.1:2018 section 4.8.3 to fix on upper and side. HB 39:2015 section 8.7 shows the use of concealed fastening clips for side so fixings are not visible.
@thatsnicayt2 жыл бұрын
What is the purpose of the 10mm hook with this kind of flashing?
@imStevohh Жыл бұрын
Stops capillary action (water running behind the metal) and it also looks better because without the hook you see bowes in the metal
@paulsmith42202 жыл бұрын
A bit of advice about use of handed snips would good. Using impact driver on roof screws is not recommend by fastening suppliers as it damages the coating. Drill driver is faster and quieter.
@calebfuller47135 жыл бұрын
Don Bradman looks suspiciously like John Lennon from the earlier video...
@metalroofing72104 жыл бұрын
Caleb Fuller 🤣🤣🤣🤙
@7divad374 жыл бұрын
Great informative series, I think he has a triplet called Tiger Woods.