How to: Install COLORBOND® BARGE CAPPINGS | Metal Roofing Online

[@tinyhousediybuild3599]

Fantastic how to video. Thanks for the skills and the comedy. Only Aussies could carry this of off with such style

[@MetalRoofingOnline]

Glad you enjoyed it!

[@markjennings6372]

It's a great video, Had to watch it twice. The first time I was enjoying the entertainment of you two and forgot to take notice of what you were doing. I'm really looking forward to watching season two for more great entertainment and of course, perfecting my colorbond installations.

[@MetalRoofingOnline]

Awesome! Thank you!

[@radiotelegram]

My timber barge boards are rotten and you've told me just what I was looking for to replace with metal. Just wanted to say thanks fellas.

[@LauchlanDaalmeyer]

definitely appreciate the old "pull my finger" bit. anyone who doesn't is just incorrect.

[@chrispalffy3511]

Thankyou sir for taking the time to put this together, awesome info, tah.

[@jeffprest4588]

Brilliant step by step. You guys have the best online information.

[@martrex]

Almost the same sort of roofing I need to put up in the next couple of days. And you guys have given me a lot of valuable info. Thanks. I'd like to point out one thing though. At a working level of around chest height, this is so easy. My roof is at 2 meters. Up and down the ladder is seriously going to stuff my old knees,

[@MetalRoofingOnline]

Glad we could give you some valuable info - our pleasure. Sorry to hear about your knees - perhaps get a friend to give you a hand.

[@whoDatBeDare]

Learned heaps. You make it look easy. Well done. Thanks heaps.

[@mowageemowagee5947]

Top stuff Fellas, simple, easy to understand and shows you all the details. Convinced me to use your company for Roofing supplies and guttering.

[@MetalRoofingOnline]

Thanks for the feedback - so glad our roofing skills could be passed onto helping you! Best of luck with your roofing and guttering project.

[@geehanna6285]

Bullshit mate if this video didn’t give you anxiety then you must definitely be their cousin or owner

[@anthonythyssen1923]

Thanks for the video... I really needed to learn about this as the roofers did not install a 2m length of barge capping on the side of a new house! The only part that needed some. Arrggghhhh....

[@MetalRoofingOnline]

Thanks for the feedback. Glad we could help!

[@gublyb3579]

Your video made it so clear that even a Kiwi like me can probably do this! Don't mention the cricket....and thanks for the great instructional videos you guys make.

[@MetalRoofingOnline]

Daniel Barnet so glad we could help 👌

[@brianrundle2875]

so it looks like you a lot of pop rivets through the flashing into the roof corrigations? I didnt think that these were water proof? what about leaks from the pop rivets?

[@Syncolonia]

great video, going to do a very similar roof, hopefully it looks as good.

[@MetalRoofingOnline]

Rui Li best of luck with your roofing

[@MissyJohnson1991]

Can crimped panels be re used? Attempt to rebuild an awning that blew off my home have been told the panels are crimped and now it’s scrap 😱

[@ericmccolough2482]

I'm planning a small skillion roof shed and am thinking H4 pine barge boards. The top of the H4 would be the same height as the tin. Re the flashing, could it go over just one corregation and 30mm down the side of the barge board? I ask because I'll see the roof and I'd prefer the flashing as small as possible. Thanks, you guys make great videos!!

[@nathancarter4867]

Hey guys great vids could you help me to see how you attach flashing between metal roofing and tile (tile roofing in an L shape and metal roofing filling that void) thank you for your help and keep up the great work :)

[@Sam-yd9ds]

thanks for the video guys!

[@MetalRoofingOnline]

No problem Sam

[@SPIDER-dq3xm]

Great vid Thanks

[@dougholloway1578]

Good video.

[@MetalRoofingOnline]

Thanks so much

[@geofftompsett9466]

Thanks guys, really helpful for the DIY novice that i am. A very simple question - what size rivets do you use in this application? Thanks

[@MetalRoofingOnline]

Geoff Tompsett - these are the ones used in the video. www.metalroofingonline.com.au/products/colorbond-pop-rivets-as4-3/

[@geofftompsett9466]

Appreciate the quick response. Thanks

[@robinsons9322]

Is this a comedy routine or an instructional video? 4/10 on both scores. So looks like you know what your doing. That’s great for….you. A 30 minute video with about 5 minutes on poorly explained techniques and how to’s. Well done.

[@JamesHowardg]

Thanks guys, great video! Would you attach these to polycarbonate roofing, or is it best attaching the barge capping to the fascia/rafter from the side?

[@metalroofing7210]

Hi James. Absolutely, these barge cappings work just as well over a polycarbonate roof. The screws that you use to hold it down should go through the barge capping and through the top of the rib of the polycarbonate and into the timber batten. It can also be a good idea to use some foam infill strips between the barge capping and the polycarbonate to stop any wind driven rain from getting under. Daz

[@Rustsamurai1]

The banter distracts from the lessoon. Its not a clown show. Half of this video ive watched on 'mute'.

[@benwhittingham2525]

So awkward when you guys have the camera pointed at you and you feel the need to comment and something stupid comes out.... lol

[@flowinsounds]

how do you stop long flashings creasing as you lift them up?

[@metalroofing7210]

Hi there it does take a little while before you learn the knack of picking up the larger flashings without bending them. It would best if you get someone to help you until you are confident enough to do it on your own

[@richardchurchward4413]

Thanks for the tips guys! Brilliant info... can I ask if you use waterproof rivets? Or do use bog standard aluminium blind rivets?

[@MetalRoofingOnline]

Richard Churchward just the standard blind rivets. 👍

[@task82]

Ripper video. Is this the same theory if cladding a wall in Colorbond in corrugated iron?

[@pats6182]

Your videos really help, from installing metal fascia to roof sheets and now the barge caps. Planning to built my own shed. Just wondering for a 3x2 shed would it be worth having a fascia or just drop the sheets above

[@metalroofing7210]

Hi Patrick. Thanks for your feedback. It’s totally up to you as to whether you would like a fascia on your shed or not. Daz

[@brianlesslie8200]

The video is well done but the information and why this and that are done is a little on the light side. I realise the guys are not trainers but there is a lot more as to why certain small details are carried out.

[@paulwheatley2361]

Aussie cowboys