How to Install Best Brake and Clutch Levers for Vulcan 650 Motorcycle CXEPI Levers Installation

[@whollymindless]

There's some Thai kid laughing about how long this took since he does it 1,000 times a day. (But those do look WAY cooler.) Great coverage of checking the clutch adjustment.

[@Kamdorian]

Haha thanks!

[@ericksantos1989]

Thanks for all videos you make. Question the switch behind de clutch lever said PASS for what is?

[@Kamdorian]

I believe it makes the headlight flash so you can tell on coming traffic to pass, not 100% sure though, never used it

[@peter.la.]

Thank you for that great explanation. Thanks from germany. 🤙🏼🙏🏼

[@Kamdorian]

You are very welcome! Thanks for watching!!

[@mariostekic]

Great explanation and it looks nice 👌👍

[@Kamdorian]

Thanks! Yea I love the blacked out look.

[@cueclubPT]

thanks! installed my new levers yesterday. Vulcan s650 2021.

[@Kamdorian]

Awesome congrats! Ride safe bud!!

[@hasanbadrun1307]

after you change the clutch lever, is it lighter than the old one?

[@Kamdorian]

Yes much lighter and easier to pull especially because it is closer to the handlebars. You can also change the tension in the clutch cable by adjusting the wires. Check the Vulcan 650 manual, it has a section on adjusting the clutch wire tension

[@zacpdx]

Can't fine the video but what were the leds you used for the replacement turn signals? Thanks!

[@Kamdorian]

I haven't replaced the turn signals yet. The LED headlight I have has integrated turn signals but I haven't connected them yet. That video will be coming soon!

[@codiejman533]

quick question. on the clutch side what is that little toggle that says "PASS" above it for?

[@Kamdorian]

its a button that activates the high beam and is used to flash vehicles in front of you to tell them you are going to pass them or tell vehicles that you are signaling them to go ahead...similar to how in cars you flash the high beams at someone to tell them to go ahead

[@gerardogomez5618]

its for you to signal to pass

[@Rcguy2591]

It gives you 200 more horsepower so you can pass cars

[@SCMOTO]

Nice video but that “gunk” was grease. You have to apply fresh grease on levers when you install them. It helps to reduce abrasion on the finished surfaces, makes it easier to operate and helps to prevent binding.

[@Kamdorian]

Yea you right..I applied some grease to the levers afterwards

[@SCMOTO]

@@Kamdorian Still good video

[@Kamdorian]

@@SCMOTO thanks man appreciate it

[@cameronj1979]

@@Kamdorian what kind of grease did you use??

[@carlofelipe5582]

Can you do a walk around tour of your vulcan after you complete that all black look

[@Kamdorian]

Of course! Coming soon, just added bar end mirrors too so it looks niiiiice.

[@sathishrao7926]

I bought the same Vulcan S branded levers from Amazon 2.5 years ago, but somehow I didn’t like them on the bike, so went back to stock..

[@Kamdorian]

Oh really? Why didn't you like them? Any issues with functionality?

[@sathishrao7926]

@@Kamdorian No.. It’s just the looks that I didn’t like.. Smaller levers appeared a kind of disproportionate.. I may give them another try though..

[@Kamdorian]

I see what you mean. I wonder if there are options for normal size levers that are still black.

[@gerardogomez5618]

was it easy to adjust the clutch pull when you swapped out the levers ? feel like my clutch lever is loose

[@Kamdorian]

Yes very easy. You can tighten the clutch cable without swapping the levers. Check the bike manual for instructions.

[@fernandovazquez678]

Hello bro, do you feel any difference from the long levers to the short ones? Grettings from México 🤙🏻

[@Kamdorian]

Hey bro, the short ones are way way better! So much easier to quick shift, I love them. And you can adjust the distance to the handle bar too, they are amazing. I think I did another video on the riding review with them check it out. Ride safe man!

[@andreasandersenthomsen4743]

Hey, do they feel loose? I bought the ones from the amazon link, and they are very loose. Im thinking about buying the same ones you have throught Aliexpress

[@Kamdorian]

No they are nice and tight for me. Did you double check the bolts used to attach them? Could be missing washer or spacer if you didn't attach it

[@andreasandersenthomsen4743]

Yea there was only the levers in the package, but maybe i could add a one, thanks for the idea

[@Mrskitten143]

I dropped my bike, and my clutch lever snapped in half. Thanks for making this video.

[@Kamdorian]

Glad the video helped you! Hope you are ok after the drop? I have dropped mine a few times too I know how you feel.

[@sz750]

They're not collapsible, are they? The link in the description to the folding levers

[@Kamdorian]

Not sure what you mean by collapsible? The levers can be adjusted to change the distance from the handle bars.

[@cardbordlord1016]

Did you have a problem on clutch lever.I can't get it adjusted enough to shift.

[@Kamdorian]

I had no problem. Check the tightness of your clutch cable might need to make it tighter if your unable to shift. Also check the gear shifter itself, could have something loose there

[@cardbordlord1016]

@@Kamdorian o

[@Kamdorian]

@@cardbordlord1016 sup did you see my last reply?

[@ed.t.hansen6499]

Why no lever covers, protectors?

[@Kamdorian]

I don't ride in the rain or off road so no need for them. Unless they offer other kinds of protection I'm unaware of?

[@w8nc82]

Legend

[@CrustyOatmeal]

they arent available on amazon anymore. any other links?

[@Kamdorian]

they can be found on aliexpress and also try searching on ebay. Here is the aliexpress link www.aliexpress.com/item/32885293583.html?spm=a2g0o.search0302.0.0.3c735a43lQtdRJ&algo_pvid=b82b3c37-600d-43ea-8123-23cc45e781ea&algo_exp_id=b82b3c37-600d-43ea-8123-23cc45e781ea-9

[@cxepi_official6029]

The CXEPI Amazon website is closed, if you need to you can make an appointment on CXEPI's website. www.bxgkparts.com/products/cxepi-motorcycle-brake-clutch-vulcan-s-650

[@riggs1971]

how much did you buy them for?

[@Kamdorian]

Only $35, check the video description to buy from Amazon

[@fuglbird]

You replace the original levers for cheep Chinese levers to get a different color? Interesting. I'm looking at the fatality rate for American bikers. It's higher than for Indian and European bikers. I no longer wonder why.

[@Kamdorian]

The levers are not cheap and they are strong durable materials. Much better than stock levers in both functionality and ease of use, make it actually safer because the rider is more comfortable. You seem to have an irrational bias against Chinese products. Connecting fatality rates to the levers is laughably stupid. Do more research before you publicly shame yourself

[@randomtito9416]

Did you mean "nut"

[@Kamdorian]

Yup!