we could learn so much if you let your buddy talk as a video creator its is obvious the multiple times you shut him down, don"t be afraid to let the guy who does it every day tell how to do it good video but heavy on the sales pitch,
@parkerhilliker56804 жыл бұрын
I got outdoor rubber backed mildew resistant carpet at Lowe’s for $1.60/6foot linear. Super resilient
@FranklinHicks-qs4gs Жыл бұрын
that old man did NOT want to be there
@johnsondrivewaycustoms19673 жыл бұрын
Got the homedepot carpet in my boat for 5 years so for ,its definitely not as thick but seems to work just fine
@johnnyb17764 жыл бұрын
How to carpet a 2x2 piece of plywood.
@paul.aragon3 жыл бұрын
Is the glue different for fiberglass than wood? If so, can you explain that?
@daveengstrom92507 ай бұрын
You have said nothing about the grain of the carpet facing the same way for the entire boat. Also, CDX plywood has voids, knots, cracks etc. I wouldn't use it to make a dog house.
@randy20582 жыл бұрын
I think he has given up on the products here or being able to purchase them on his website
@opinionatedviewer77304 ай бұрын
This video gave me plenty of confidence to do mine. All of my edges and corners look great still and here we are 5 years later.
@dav10996 жыл бұрын
Links are not working in the USA either, at least not in Illinois.
@robertotto58113 жыл бұрын
Thanks, I needed help with the corners. This is what I was looking for.
@171widetrack6 жыл бұрын
Your web links are out of date
@Troys2215 жыл бұрын
Do not take your boat to these hacks!
@lukebray21924 жыл бұрын
How do you screw it to the boat? Do you screw through the carpet and leave the screw exposed?
@LesPaulFireFly4 жыл бұрын
A great question. In a runabout you install the floor first. You can’t roll the carpet underneath the wood.
@topherbec75784 жыл бұрын
Can carpet be installed on aluminum?
@normferguson27694 жыл бұрын
Topher Bec my Alumatech boat has carpet glued to the aluminum hatches. Main areas have marine grade 3/4” plywood with carper glued at the edges (not all over)
@johngates4503 жыл бұрын
I picked up a 1977 Glas- Ply.. The boat itself has been covered and maintained and the boat is solid. I'm not much of a Craftsman but was curious about putting in new carpeting this Spring in my boat. Thx for sharing this info. I had no plans on getting the Carpet from Lowes etc so you just reinforced that reasoning. Thx Again
@peteshelby214 жыл бұрын
Why show install by placing ply wood on carpet?? Show people what to do but not really lol. I stopped watching after that
@dddppp81312 жыл бұрын
Dave, I have a 21 x 16 inch 3/4 in marine plywood that I want to completely cover. This was to replace the back of a deck/flip seat back and have one side with cut out corners to fit into the deck. I like the way you cover the corners, but having problems completing all of the corners the same way as you do. Actually the cut results in me having two extra corners on the plywood. Your suggestions would be appreciated. Thanks.
@joeszymanski69363 жыл бұрын
I have an older Lund boat with a rotten side panel that needs replacing. The panel is covered in vinyl. I have purchased some marine plywood and vinyl fabric. What sort of glue or contact cement would you recommend for glueing the vinyl to the wood and should I seal the wood first
@donnalennon66054 жыл бұрын
that is not how to carpet a pontoon boat
@djwillmasterson6 жыл бұрын
Hi Dave, Thanks for your video. None of your links are working here in Ireland. Can you PM me with updated links please. Thanks a mill
@ronaldbertin94555 ай бұрын
How do you stick it to Aluminum????
@WranglerAddiction6 жыл бұрын
The website is not working , do you have another website where i can buy them ?
@richardranger4460 Жыл бұрын
Thanks for the video
@Samtheman6767 ай бұрын
Carper gatekeeping
@TheDeadwoods-pl3yo Жыл бұрын
Very helpful thankyou
@1WildOutdoorsMan Жыл бұрын
Your link isn’t working
@bzman6092 Жыл бұрын
what thickness cdx?
@domprovo43176 жыл бұрын
im trying to determine if I need to completely coat my marine grade plywood for flooring before the rubberized marine carpet or is it not needed?
@BroShaver5 жыл бұрын
AJ Provo paint enamel on regular plywood (don’t use OSB on aluminum boats due to reaction) works great
@Mitch-rd9gs6 жыл бұрын
Hi Dave. Going to be replacing the carpet in my ‘71 Larson Shark. Previous owner used some cheap carpet with no rubber backing. It created some bubbling in the fiberglass floor. How can I fix this? Also, I’m going to purchase the “Automarine” carpet from Menards. It’s classified as “Indoor/Outdoor” at the store so I’m confused as to why I can’t use that. Any help is appreciated!
@rockinrobin6366 жыл бұрын
Itz MitchMitch k ,.
@Th-fc4nq5 жыл бұрын
I used that same carpet in my boat 2 years ago and it still looks brand new
@douglasurban64092 жыл бұрын
Were do I get the roller?
@victordold29166 жыл бұрын
thank you you have a very good vid
@jakec75693 жыл бұрын
🤣🤣🤣🤣🤣
@domprovo43176 жыл бұрын
what mike said
@AB-bg1or6 жыл бұрын
Regular steel staples on a boat?
@Mitch-rd9gs6 жыл бұрын
Wouldn’t recommend it. Galvanized staples aren’t that much more expensive and are worth the extra penny.