How to install Chevy Mini Spool Locker for S10. Easier than you think!!

[@EndMotive]

That 80 flap wheel grit did the trick 😂 and that shirt wipe was a pro move.

[@Drakes_Garage]

Should have used 150 😢

[@frankrizzo2724]

​@@Drakes_Garagehey did you use the original pin that holds it all together?

[@Drakes_Garage]

@@frankrizzo2724 yes I did.

[@brandonfolk6442]

@@frankrizzo2724I came back for this answer …

[@brandonfolk6442]

@@Drakes_Garagethat answered my question , mini spool from jegs is 78 . Says I need the pin sold separately .. thanks

[@vibezdiesel7522]

You’re a stud! Thanks for the quick advice God bless

[@Drakes_Garage]

@@vibezdiesel7522 you’re welcome!

[@REKtheWORLD]

I have a 78 Skyhawk with the 7.5 rear. I plan on installing a mini spool also since it’s 350 swapped. Your video was helpful!!

[@Drakes_Garage]

Thanks!! Glad I could help

[@cognac8297]

Is there a kocker for a 1999 s10 zr2 truck.

[@ubaldomares4315]

Is it a good idea to run a mini spool with an aluminum driveshaft????

[@Drakes_Garage]

@@ubaldomares4315 I’m not 100% sure. Mini spool are hard on things

[@cognac8297]

If you cant get the filler off the diff. Just make a new hole on the cover and adapter it

[@noturnsvarietyhour]

A lot of KZbin car guys leave that top bolt in loose when draining their diff so the cover doesn't fall down and make a huge mess. Just a little something for the next time. Of course I use a Fumoto valve on my oil pan because I hate making a mess.

[@Drakes_Garage]

Not a bad idea Josh!

[@furiousmarc2294]

should i get a limited slip carrier if i wanna still drive it on the road?

[@Drakes_Garage]

A limited slip would make it more of a daily than my mini spool for sure

[@jasonsinacori9445]

How was the roadhouse?

[@Drakes_Garage]

Always a classic 😂. Should we stop at the Double Deuce?

[@jasonsinacori9445]

Yes for sure brother

[@brandonfolk6442]

What trac bars you runnin ??

[@Drakes_Garage]

Caltracs. They rock

[@wraithmedaberry5795]

man, you made that look too easy, 4.10 gear in the back of my isuzu pup isnt letting the cube piece past the ring gear. i think im gonna take ye old flap disc and clearance a hair off it.

[@Drakes_Garage]

@@wraithmedaberry5795 the flapper is the key!!!

[@rbarker4426]

Not a good application for street use. Much harder to turn corners.That setup is for racing only.

[@pmd7771969]

No it won't stay welding it