How to Install Corbeau Forza Racing Seats in an Acura Integra

[@tunlaw6435]

When I heard you say you're from Spokane I was hooked, because I also drive an integra.

[@rayregnogarage]

Nice. Are You in Spokane, too?

[@roXusJDM]

This is a really good tutorial you earned a sub my integra brother

[@rayregnogarage]

Thanks!

[@conman7975]

Spokane Washington?

[@rayregnogarage]

Yup

[@jasonhoover2590]

Bro im in spokane tooo

[@rayregnogarage]

Nice. What do you drive?

[@jasonhoover2590]

@@rayregnogarage 2001 integra

[@bryanlarrea2867]

Id recommend getting the pci seat brackets w/ sliders if you can side mount this seat. You can also tilt the seat back a little more with side mount brackets like the PCI's. I sit real low in my ek hatch with the pci brackets and a Cusco vios 3 seat. My seating position is close to a 370z nismo with the oem nismo recaro's

[@rayregnogarage]

Thanks for the tip! My wife hates how upright the seats are! I’ll have to check when I get to the shop but I think these seats are bottom mount. I’ll have to come up with some sort of adapter. Any suggestions for those?

[@bryanlarrea2867]

@@rayregnogarage I guess the only way to lower those would be to remove the sliders. I don't think bottom mount seats can be tilted either. IMO I wouldn't do any extensive modifications to the seat or bracket as that could void passing tech inspection if your going out on a track day

[@rayregnogarage]

Ya, I’ve found if I move my seat back a and slouch a little, my head isn’t so close to the roof anymore. haha

[@bronxzauce]

Plz don’t let this Channel die 🥺

[@rayregnogarage]

Why would I do that? haha

[@rayvee9302]

yo… how do you like these seats? i’m thinking about getting them for my em2. i’m also a san diego moved to central eastern washington. i’m 2 hours west of spokane.

[@rayregnogarage]

I really like them. The only thing that I don't like is that I'm short and when I have the seat all the way forward, My forehead almost hits the visors. I actually drive with the seat pushed back and I slouch. But otherwise, I like them much better than the factory seats. Those things were tired.

[@Grudge69]

I know this an old video but only place ive seen these installed on an inegra. I want to grt the wide version which are 1.5" wider in each width dimension. So with the shoulder veing 3/4 inch closer to the door panel would there still be no rubbing?

[@rayregnogarage]

not sure might have to take the door cards our worst case.

[@nowaydudehuh8145]

Quick question you think these will fit in a 93 integra? Just ordered one driver seat with rails. i got full interior and i see u do to. So hopefully my seat will fit with no issues. Any feedback would be appreciated! And sweet dc4 by the way!✌

[@rayregnogarage]

I LOVE the 93 body style. I’ve never been in one though so I’m not really sure about the fitment with these seats. It’s a little tight putting the seatbelt on with the door closed.

[@nowaydudehuh8145]

@@rayregnogarage thanks for the feedback. I think it should fit. The da9 are little more roomy than the 3rd gen integra i think so hopefully no issues will pop up ✌

[@Epic_Badger]

Can I ask how tall you are? I am looking into a set of Corbeaus, but head room is a concern for me in these cars.

[@rayregnogarage]

I'm only 5'4". With the seat all the way up, there's no way i could fit a helmet using these sliders. When I drive around won, I push the seat back a little and slouch in the seat so I'm not so far forward, but that wouldn't be good for racing. I saw a video on Donut Media where they ran corbeaus and had the same problem in a 350z. You might need custom seat brackets. That's what they did.

[@Epic_Badger]

@@rayregnogarage but this is one of their fixed seats with the thicker base height correct? My problem is I am 6’ and long in the torso so fitment is a issue.

[@rayregnogarage]

@@Epic_Badger Yes, it's a fixed seat, but I have the Corbeau sliders made for this seat so I can slide the seats forward and back. The sliding mechanism puts the back of the seat about 2.5 maybe 2 3/4 inch above the floor. If you got a custom seat mount that is fixed, you can get the seat to mount lower toward the floor. There is also a metal perch that the seat mounts sit on. If you cut that out and made the floor completely flat, you could gain another couple inches of room and the seats could mount directly to the floor. But you'd definitely some custom fab to make that work. Also.. as you sit further back, the roof is higher.

[@rayregnogarage]

Someone else commented below about using PCI brackets to mount the seats, but that only works with seats that have side mounts. These seats mount from the bottom. I haven't looked to see if there is a side mount adapter for these seats, but that might get a little more headroom if they were mounted that way.

[@rayregnogarage]

I just got done talking to Forza Customer Support. The Forza doesn't support side mount. You might want to look into a seat that does.. though they seem to be the pricier ones.

[@James-eh6jh]

Im starting to like integras more lol!

[@rayregnogarage]

hahahaha. I have some Ranger content too...will post that tomorrow or Saturday. but I haven't posted anything on this car in over a year. lol. Need to show it a little love.

[@stuffedcrust9324]

if you wanna sell those confetti black seats i’ll buy em for $400 😮‍💨

[@EdzHDx]

Yo so I just got me a wide forza seat too. Going into my 92 eg hatch. I was told the hatch needs to be gutted so it can fit. I see you got full interior. You got any hitting or rubbing issues in your teggy ?

[@rayregnogarage]

It’s a tight fit. but no rubbing. it’s easier to put the seatbelt on with the door open. but i will be getting a harness bar and 4 or 5 point

[@sean-matthewbumagat9155]

Heyy i just recently picked up the dc2 recaros but they didn’t come with the brackets, just wondering if the corbeau set mounts can fit the recaros???

[@rayregnogarage]

I’m going to guess not. But honestly don’t know. You could email them and ask though. Sorry!

[@davidsimmons177]

i thought you said attach it to the Nazi bracket lololol

[@rayregnogarage]

what the what? when???

[@halfmoongarage]

After ordering one of these seats, I noticed that they are not recommended for people over 6 foot. I’m almost 5’ 11” so I’m a bit nervous about being able to safely run these seats with a 4 point harness. Atleast I know they will be comfortable. Nice integra btw!

[@rayregnogarage]

I dig that Volvo!!! I’m only 5’4” and I’m worried about hitting my helmet on the roof let alone a cage if I build one. ill have to ditch the sliders for sure

[@halfmoongarage]

@@rayregnogarage thanks, luckily the Volvo has a lot of head room.

[@rayregnogarage]

@@halfmoongarage Super cool. I wanna get one of those too!

[@Noe-st2nl]

Hey I plan on getting these seats and I’m 6’ 0” did these leave you with any head room?

[@halfmoongarage]

@@Noe-st2nl i have just enough room that I’m sure I can drive with a helmet on. Just make sure the hole for the harness won’t be to low in relation to your shoulders. If you are a wide built person I’d suggest the xl. I fit in the standard one but I’m sure the xl would feel better.

[@ashtonwakkinen9874]

ayo! i’m currently 5’6, how comfy are these?

[@rayregnogarage]

I like them. I picked them because I have wide shoulders. If you want seats that hold you in really good, keep your dimensions and the dimensions of the seat into consideration. They are super comfy. Drove 17 hours straight to Vegas and did it again come back home and they were more comfortable than the factory seats.