Thank you for watching. Please subscribe and share my work! Tool Links: Ring compressor kit: amzn.to/39F8DK0 Narrow Band ring compressor kit: amzn.to/2DbJURb Join this channel to get access to perks: kzbin.info/door/BhM8DCKnT3qXwTW0eToyCgjoin
@DjRay19677 жыл бұрын
I don't care what anyone says the second method is the easiest way to go. I've been doing that method For years on 2 and 4 stroke motorcycle engines. This video just reaffirms that this method is one of many good ways to install a motorcycle cylinder. 👍👍👍👍
@markkelhart33743 жыл бұрын
Really don't care who's a hater on this I HAVE and putting motors together for a long time 2-stroke 4-stroke big bore etc. Best method ever and like your student said you don't need any help thank you... keep on KZbin and explanation of the float on a carburetor was awesome to thanks again the only thing I would add to that is you if you do have a ring compressor it works awesome putting them in that way instead of using a little screwdriver still awesome idea thanks a lot
@How2Wrench3 жыл бұрын
Right on. You rock Mark...Thank you for commenting. Want more benefits? Smash the subscribe button and bell! Want even more??? Join the channel: -Daily MEMBER FIRST COMMENTS ANSWERED FIRST -Live Q/A video chats -Wonder if we have a video on your need? Members can request content links! -Full Access to the ENTIRE 700 video library -Member-Only FREE tool giveaways Join this channel to get access to perks: kzbin.info/door/BhM8DCKnT3qXwTW0eToyCgjoin Just want to say thanks quick to support us for this information and our work saving you money? Give us a high 5 here: www.paypal.me/how2wrench
@patriotsleepercell40607 жыл бұрын
I love method 2 that is how i'm going to do my bike since i am alone.
@timryerson67338 жыл бұрын
one tip I gave to my students was instead of using a screw driver to work the rings in to the cylinder I use plastic or bamboo chopsticks to prevent scratching the rings especially the cast rings. they work really and I also use tuning fork type rod and piston supports I either build them from 1/2 alluminium bar stock or blocks of hardwood
@How2Wrench8 жыл бұрын
+Tim Ryerson Freakin Awesome
@chewybrand2386 жыл бұрын
I've used the "screwdriver" method myself. I would prefer wood or plastic.
@gentlerowdy5 жыл бұрын
Time i have one tries to use a a unsharpened pencil but you will never know when a bloddy particle of that fell in the chamber of your crankcase- as wood is quite vulnerable to the pressure you use to compress those rings
@herkko615 жыл бұрын
Exactly! No metal tool for this rings compressing job.
@XenaTheQuadCamBikah2 ай бұрын
Ordered my sportster Hammer 1275 kit with pistons already installed in the cylinders. I’ve installed two sporty kits this way and it’s super easy. First time I pulled one piston a little too far down to get it on the connecting rod but was able to gently compress the rings with my fingers and put the piston back up. Love the channel guys!
@How2Wrench2 ай бұрын
Thank you Xena! We love sharing comments like this with Shane. Thanks for sharing and the added value to our wrenching community. Keep them coming. You rock for commenting! We will let Shane know! Want even more? Best $$$ you'll ever spend...Join this channel to get access to perks: kzbin.info/door/BhM8DCKnT3qXwTW0eToyCgjoin -Daily MEMBER FIRST COMMENTS ANSWERED FIRST -Live Q/A video chats -Wonder if we have a video on your need? Members can request content links! -Full Access to the ENTIRE 700 video library -Member-Only FREE tool giveaways Ways to support or high five How 2 Wrench! Thank you in advance. YOU MOTIVATE US TO DO MORE! 1. Smash the subscribe button (thank if already a sub!) 2. Have you seen our "KZbin Trained Support Shirts? goodfellasmerch.com/collections/how-2-wrench/products/support-shirt 3. High five donation: www.paypal.me/how2wrench 4. Got an emergency and your head is about to explode from frustration or fear? Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one
@herminigildodelacruzjr17524 жыл бұрын
Actually the second way is so much safer than the first plus this way you can do it alone and this is how i put the piston and this channel helps a lot of beginners to be diligent just my way of saying thanks to shane conley for sharing step by step instructions and no B.S
@How2Wrench4 жыл бұрын
👍 Thank you for taking the time to comment! Hit that subscribe button if you haven’t please! It helps us! Here is a way to support all the free videos. Want to say “thanks” or “keep it up”? Click here www.paypal.me/how2wrench Coach Conley is also available for hire to personally work one on one with you if ever needed. Yep he is a real person. Give him a call @ 602-345-0432 Details here: how2wrench.com/product/personal-tech-training-phone-facetime/ Your answers and help are just around the corner. Save time and money while protecting your investment and yourself by doing it the right way! Follow us! Web: www.How2Wrench.com www.Tools2Wrench.com
@herminigildodelacruzjr17524 жыл бұрын
@@How2Wrench i am a subscriber to your channel and thanks again👌
@used2befast3 жыл бұрын
Thanks so much for this video!! I am rebuilding a Moto Guzzi and followed your method #2. It was surprisingly easy!!
@How2Wrench3 жыл бұрын
Nice work! Thank you for commenting. Want more benefits? Smash the subscribe button and bell! Want even more??? Join the channel: -Daily MEMBER FIRST COMMENTS ANSWERED FIRST -Live Q/A video chats -Wonder if we have a video on your need? Members can request content links! -Full Access to the ENTIRE 700 video library -Member-Only FREE tool giveaways Join this channel to get access to perks: kzbin.info/door/BhM8DCKnT3qXwTW0eToyCgjoin Just want to say thanks quick to support us for this information and our work saving you money? Give us a high 5 here: www.paypal.me/how2wrench
@Salvatore33335 жыл бұрын
I used method two as I'm on my own and inserted pistons from the top going down so could monitor rings and gaps as the moved in the cylinder on a bench at home....pre-fitted pistons in cylinders and marked the four spots for gaps all the way top to bottom vertically....babbaboom job done....cheers Shane.\m/
@How2Wrench5 жыл бұрын
Thanks for commenting and adding value to our community! Have you subscribed yet to never miss a video? Have you seen the video playlists? Over 600 videos! Check them out here: kzbin.infoplaylists Want to say “thanks” or “keep it up”? Click here www.paypal.me/how2wrench Your answers and help are just around the corner. Save time and money while protecting your investment and yourself by doing it the right way at www.How2Wrench.com
@paulacabbo4666 ай бұрын
The rings rotate in a running engine at various rates if the gap positions move a little during installation it won't matter
@Wjones4504 жыл бұрын
You are a great teacher. You explain things and methods very clearly and keep the group involved. great job!!
@How2Wrench4 жыл бұрын
Thank you so much! 👍 Thank you for taking the time to comment! Hit that subscribe button if you haven’t please! It helps us! Here is a way to support all the free videos. Want to say “thanks” or “keep it up”? Click here www.paypal.me/how2wrench Coach Conley is also available for hire to personally work one on one with you if ever needed. Yep he is a real person. Give him a call @ 602-345-0432 Your answers and help are just around the corner. Save time and money while protecting your investment and yourself by doing it the right way! Follow us! Web: www.How2Wrench.com www.Tools2Wrench.com
@albertaboy11396 жыл бұрын
I’m not a mechanic but have been a carpenter for 30 years and agree with the upside down solo method of installing piston into jugs. When I install doors ( heavy fire down to hollow core) I like be solo. Less hands on means less pinched fingers or things messed up. The best way to learn the easy way is by yourself alone. Thanks for the knowledge again. Great vids.
@derekwatson19753 жыл бұрын
Another reason you would want to do it like this is you may not have enough clearance to get a tool underneath the cylinder. I have installed many this way when there is no way possible to use a ring compressor tool on the cylinder.
@How2Wrench3 жыл бұрын
Thanks for the support! Awesome and thanks for commenting! Can you smash that subscribe button and share our channel please? We have over 700 videos in playlists! Even more training and deep dives if ever needed… Join this channel to get access to perks: kzbin.info/door/BhM8DCKnT3qXwTW0eToyCgjoin -Daily MEMBER FIRST COMMENTS ANSWERED FIRST -Live Q/A video chats -Wonder if we have a video on your need? Members can request content links! -Full Access to the ENTIRE 700 video library -Member-Only FREE tool giveaways Just want to say thanks quick to support us for this information and our work saving you money? Give us a high 5 here: www.paypal.me/how2wrench
@bigbear35056 жыл бұрын
i been work on many atv and snowmobile .. i never used a screwdriver at all because it will leave a mark in piston and rings .. i used piece of plastic that i made special tools .. or used compression rings tools
@moustachemike71287 жыл бұрын
i use the wood handle of a pencil wire brush..wire end cut off from the handle and use that to push on the rings...no slip gouging the ring and piston...
@commonclay00708 жыл бұрын
Thanks for all you do. your videos are the biggest help to me. I'm watching all the videos I can from you. I'm going to do a 88" - 95" kit on my bike. I'm going to do all the work myself. money saver. so I really appreciate you and your teaching skills. Awesome. thanks.
@smiley42886 жыл бұрын
Hi Shane, you are awesome so I’ve just stripped the barrels n pistons off my 70,000 mile Dyna looking for an noise issue!!! Thanks you’ve given me some great pointers!!! 😎
@How2Wrench6 жыл бұрын
Thanks smiley...You can reach me personally @ how2wrench.com/contact/ Please show your support by a membership or donation to get the help you need beyond those popular free videos that have saved you so much money and grief! You can say thank you here: www.paypal.me/how2wrench
@smiley42886 жыл бұрын
Shane Conley Hi Shane, thanks my friend I will most definitely be donating to your channel 😎
@How2Wrench6 жыл бұрын
Thank you for sharing…below are some links that help support me and my work. Please subscribe and share these videos to make a difference in education! Keep Wrenching, Shane Conley Shirt/Stickers link: how2wrench.com/product-category/specials/ Follow us! Web: www.How2Wrench.com www.Tools2Wrench.com KZbin: kzbin.info Instagram: instagram.com/how2wrench/ Linkedin: www.linkedin.com/in/shane-conley-how2wrench/ Facebook: facebook.com/MechanicsLearningSharingPage/ Free Mechanic info, tool reviews, and “how to” videos newsletter sign up: how2wrench.com/subscribe-free-newsletter/ Amazon Tools: www.amazon.com/shop/shaneconleyhow2wrench?ref=ac_inf_hm_vp
@danielwoodhouse18706 жыл бұрын
Ill be doing this myself shortly. Ill be using method 2 for sure. Thanks so much for the video!
@How2Wrench6 жыл бұрын
Hello friend! Have you Subscribed yet to never miss a video? Have you seen the video playlists kzbin.infoplaylists ? Still have questions? Coach Conley provides tech help and works one on one! His KZbin and training center has grown beyond the ability to answer every question (11 million views! Over 500,000 a month!) He gets 300-400 requests a week. Become a member for his direct cell phone number and personal assistance! Click here for the membership links and welcome to the community! how2wrench.com/product-category/specials/ Want to say “thanks” or “keep it up”? Click here www.paypal.me/how2wrench Your answers and help are just around the corner. Save time and money while protecting your investment and yourself by doing it the right way!
@Hwyw4 жыл бұрын
Great teacher
@How2Wrench4 жыл бұрын
Thank you for the kind note... 👍 Thank you for taking the time to comment! Hit that subscribe button if you haven’t please! It helps us! Here is a way to support all the free videos. Want to say “thanks” or “keep it up”? Click here www.paypal.me/how2wrench Coach Conley is also available for hire to personally work one on one with you if ever needed. Yep he is a real person. Give him a call @ 602-345-0432 Your answers and help are just around the corner. Save time and money while protecting your investment and yourself by doing it the right way! Follow us! Web: www.How2Wrench.com www.Tools2Wrench.com
@mathewcool10yt313 жыл бұрын
i do the last way by my self it is my preferred way and i never had any problems but i know it can cause problems if you break a ring but if you do not brake a ring you are good
@How2Wrench3 жыл бұрын
Nice! Awesome and thanks for commenting! Can you smash that subscribe button and share our channel please? We have over 700 videos in playlists! Even more training and deep dives if ever needed… Join this channel to get access to perks: kzbin.info/door/BhM8DCKnT3qXwTW0eToyCgjoin -Daily MEMBER FIRST COMMENTS ANSWERED FIRST -Live Q/A video chats -Wonder if we have a video on your need? Members can request content links! -Full Access to the ENTIRE 700 video library -Member-Only FREE tool giveaways Just want to say thanks quick to support us for this information and our work saving you money? Give us a high 5 here: www.paypal.me/how2wrench
@jimglasscock81698 жыл бұрын
The first time I saw method #2 used was in a very old machine shop in at least it's second generation, specializing in HD rebuilds.. I had no idea it was so controversial.
@How2Wrench8 жыл бұрын
Right? Some pretty bent people over this...😝
@timryerson67338 жыл бұрын
I love these videos, I taught powersports(small engine,snowmobile,atv, marine and some motorcycle) at Fairview college in northern alberta for 4 years, doing something like these for the theory classes or demo,s before we actually went to work in the shop.is a great idea because its really tough to show 25-28 students individually these techniques in the time allotted in the shop. really hard to get around to everyone and make sure they all understand the procedures. excellent way to teach. nice job. and it also shows there are always other ways to do the job properly and with skill and end up with a finished product you can be proud of
@How2Wrench8 жыл бұрын
+Tim Ryerson Thank you and please share!
@flytheedge6 жыл бұрын
Shane, I really appreciate all the videos! I'm not a technician but I have done 99% of my maintenance with your videos and those of others, in supplement to my service manual. I'm looking at doing a big bore kit on my '17 XL1200X and feel confident that I can successfully do this project myself.
@christopherharkey16694 жыл бұрын
In this video the obvious lesson is camaraderie and versatility. Great job.
@How2Wrench4 жыл бұрын
Glad you think so! We sure love you taking the time to comment. Are you coming to the next live session? There a few ways you could help keep this work going and stay connected with me personally. 1. The fastest and best thing you could simply do for us is hit that subscribe button…helps us creators more than you know! 2. Join this channel to get access to perks: kzbin.info/door/BhM8DCKnT3qXwTW0eToyCgjoin 3. Give us a high 5 here: www.paypal.me/how2wrench Keep Wrenching, Shane Conley Peoria, AZ USA Follow us! www.How2Wrench.com www.Tools2Wrench.com Facebook: facebook.com/How2Wrench/ Instagram: instagram.com/how2wrench/
@christopherwilliams84236 жыл бұрын
Make sure you got a rag or such to catch the circlip, so it can’t falls into the case.
@stevea66287 жыл бұрын
Yeah #3 , I would like to see that much cooperation in the real would
@How2Wrench7 жыл бұрын
Thank you! Please share on your social media! Make sure to subscribe and click the notifications button for all future videos! Also, my playlists are broken down pretty well. The most popular one being: "Every Mechanic Should Know This" kzbin.info/aero/PLAtBOuPaEyt_uMyVlK1tsBVnSYW1Q0vCK Feel free to make any suggestions or reach out to me for personal mentorship, Keep Wrenching, Shane Conley Instructor/Motivator/Motorcyclist
@herminigildodelacruzjr17525 жыл бұрын
Same as you sir the second one is what i use when i am installing piston grate video i can only hope you never get tired of helping new engine mechanick
@How2Wrench5 жыл бұрын
Thanks for commenting and adding value to our community! Please subscribe, share and consider a H2W membership to support our free work here! We are ramping up for the upcoming new member only site with profiles, raffle drawings, and weekly live Q/A sessions and a for sale page! We have a LIVE Q&A starting soon and will use comments from videos to try and answer too. Got a question you need answered sooner than our LIVE Q&A Shows are on? Here’s how to get your answer for free! kzbin.info/www/bejne/pXLIia1no8lgm7M (and other free tools and products!) Get my cell number here: how2wrench.com/product/personal-tech-training-phone-facetime/ Have you subscribed yet to never miss a video? Have you seen the video playlists? Over 600 videos! Check them out here: kzbin.infoplaylists Your answers and help are just around the corner. Save time and money while protecting your investment and yourself by doing it the right way at www.How2Wrench.com Want to say “thanks” or “keep it up”? Click here www.paypal.me/how2wrench Thanks for commenting and adding value to our community!
@trevorjameson32137 жыл бұрын
Great video, I'm really happy to see this on youtube. Excellent! Thank you for showing three different methods. I still prefer the first method though, use a ring compressor and lower the cylinder over it. Very easy this way and no fooling around with the circlip with a cylinder still in your hand. Anyway, it's so good to see each method of doing this job!
@victorcarmona86065 жыл бұрын
Great work on that engine
@joelstitzel1025 жыл бұрын
im with you brother done all three ways never had issues.
@kishanpreston15333 жыл бұрын
Apply oil before installing piston
@How2Wrench3 жыл бұрын
Right on...Check out our engine engine building series! Awesome and thanks for commenting! Smash the subscribe button (thank if already a sub!) Have you seen our "KZbin Trained Support Shirts? Great way to "high five us" goodfellasmerch.com/collections/how-2-wrench/products/support-shirt Join this channel to get access to perks: kzbin.info/door/BhM8DCKnT3qXwTW0eToyCgjoin -Daily MEMBER FIRST COMMENTS ANSWERED FIRST -Live Q/A video chats -Wonder if we have a video on your need? Members can request content links! -Full Access to the ENTIRE 700 video library -Member-Only FREE tool giveaways Just want to say thanks quick to support us for this information and our work saving you money? Give us a high 5 here: www.paypal.me/how2wrench
@kenny5537 жыл бұрын
Shane, I think I've watch all your videos. Very well done. I like your focus on the little things that are often overlooked or not mentioned in the service manual. Doing a 883 to 1200 conversion and have not looked inside a motor since 8th grade shop class 40+ years ago. Your videos have been extremely helpful. Thank you.
@How2Wrench7 жыл бұрын
Thank you for the kind words friend! If I can ever be of service to you, here is a video explains how to connect with me. kzbin.info/www/bejne/rJvZnnVmZsqVmdU Keep Wrenching, Shane Conley Instructor/Motivator/Motorcyclist www.how2wrench.com Like freebies? Click here for a free diagnostic checklist! gem.godaddy.com/signups/364621/join Did you like this free video and hope to see more? Would you just like to say thank you with a donation? Click www.paypal.me/how2wrench
@3544S8 жыл бұрын
I use a combination of both methods. I install the piston into the cylinder on the bench with a compression tool. I install one circlip and partially install the wrist pin. Then I go install it on the bike. Not gonna lie, sometimes It's a pain to install the last circlip, while holding the jug. Would like to see someone come out with a circlip install tool. Maybe motionpro makes one?
@How2Wrench8 жыл бұрын
+3544S They exist but are costly as they only fit each size wrist pin.
@jeffstone26017 жыл бұрын
**GRACIAS HOMBRE. DESDE COLOMBIA SALUDOS**
@sergioa.villarraga26163 жыл бұрын
Recently, I learned the second method. I always used the third method. Hey calm down, only on my bike ok? lol
@How2Wrench3 жыл бұрын
Nice....the third is most common for sure... Awesome and thanks for commenting! Smash the subscribe button (thank if already a sub!) Have you seen our "KZbin Trained Support Shirts? Great way to "high five us" goodfellasmerch.com/collections/how-2-wrench/products/support-shirt Join this channel to get access to perks: kzbin.info/door/BhM8DCKnT3qXwTW0eToyCgjoin -Daily MEMBER FIRST COMMENTS ANSWERED FIRST -Live Q/A video chats -Wonder if we have a video on your need? Members can request content links! -Full Access to the ENTIRE 700 video library -Member-Only FREE tool giveaways Just want to say thanks quick to support us for this information and our work saving you money? Give us a high 5 here: www.paypal.me/how2wrench
@PakPikPuk6 жыл бұрын
I love this guy
@jakeharris44652 жыл бұрын
Yep wide 10mm zip ties 👍👍
@How2Wrench2 жыл бұрын
You rock! Best way to help us back is joining or grabbing our T-shirt! Support links and gear below! Awesome and thanks for commenting! Smash the subscribe button (thank if already a sub!) Have you seen our "KZbin Trained Support Shirts? Great way to "high five us" goodfellasmerch.com/collections/how-2-wrench/products/support-shirt Join this channel to get access to perks: kzbin.info/door/BhM8DCKnT3qXwTW0eToyCgjoin -Daily MEMBER FIRST COMMENTS ANSWERED FIRST -Live Q/A video chats -Wonder if we have a video on your need? Members can request content links! -Full Access to the ENTIRE 700 video library -Member-Only FREE tool giveaways Just want to say thanks quick to support us for this information and our work saving you money? Give us a high 5 here: www.paypal.me/how2wrench Got an emergency and your head is about to explode from frustration or fear? Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one
@paulacabbo4666 ай бұрын
I never had a problem just using my fingers to compress each ring as the cylinder drops, the piston has be up high enough to get your hands in there but not so high the jug won't catch the studs, tall cylinders you can get away with this, short cylinders would be more difficult
@davidthomas1732 Жыл бұрын
Method 2 great for chainsaw. Thanks.
@How2Wrench Жыл бұрын
You rock for commenting! Grab our T-shirt! Support links and gear below! Awesome and thanks for commenting! Smash the subscribe button (thank if already a sub!) Have you seen our "KZbin Trained Support Shirts? Great way to "high five us" goodfellasmerch.com/collections/how-2-wrench/products/support-shirt Join this channel to get access to perks: kzbin.info/door/BhM8DCKnT3qXwTW0eToyCgjoin -Daily MEMBER FIRST COMMENTS ANSWERED FIRST -Live Q/A video chats -Wonder if we have a video on your need? Members can request content links! -Full Access to the ENTIRE 700 video library -Member-Only FREE tool giveaways Got an emergency and your head is about to explode from frustration or fear? Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one
@SaddleTrampTV6 жыл бұрын
The second method is exactly how I built my motor. Why does harley hate that so much?
@athame573 жыл бұрын
What if you are dealing with an across the frame four?
@How2Wrench3 жыл бұрын
Shane has an have an old video on that. Actually just bought a crate of motors to even modernize the video but it will show you what to do. Become a member and you can view it here: kzbin.info/www/bejne/epanm4Shaq2jn9E Let me try and see I can catch Shane to answer quick. His internet is limited right now until the weekend. Shane is in Africa training students this summer. We are just the social media team. He plans on answering channel MEMBER questions each Sunday! Not a member yet? Here are the details! Want him to drop his wrenches and help you? He loves helping members and it is only $1.99 a month to join (more options if you really want to say thank you too) All member tech questions like this get directly forwarded to him every day! Here is how to get in! * Join here: kzbin.info/door/BhM8DCKnT3qXwTW0eToyCgjoin * Just looking to give us a high 5? Click here: www.paypal.me/how2wrench * Is this an emergency and your head is about to explode from frustration or fear? Get Shane’s cell here: how2wrench.com/product/personal-tech-training-phone-facetime/ Note: If you are a new channel member please reply back and we will see your KZbin Member handle in your name. We will have a private member-only FB and web page coming he can directly do Q/A there! Thank you for being patient as our growth has blown up!
@Takunrsx6 жыл бұрын
i have to install my pistons on a honda rebel engine, im so using the 2nd method tomorrow cause i had such a bad time trying to install them and not having any luck
@thewildman27293 жыл бұрын
Thanks you guys really help me out
@How2Wrench3 жыл бұрын
Thank you for commenting. Want more benefits? Smash the subscribe button and bell! Want even more??? Join the channel: -Daily MEMBER FIRST COMMENTS ANSWERED FIRST -Live Q/A video chats -Wonder if we have a video on your need? Members can request content links! -Full Access to the ENTIRE 700 video library -Member-Only FREE tool giveaways Join this channel to get access to perks: kzbin.info/door/BhM8DCKnT3qXwTW0eToyCgjoin Just want to say thanks quick to support us for this information and our work saving you money? Give us a high 5 here: www.paypal.me/how2wrench
@mattmboa8 жыл бұрын
used hose clamps as a ring compressors in a pinch once lol
@commonclay00708 жыл бұрын
mattmboa, that's a great idea
@chrisalberts50411 ай бұрын
Does the piston ring clamp tool come in different sizes? Also this video helped me out alot. I work on atvs snowmobiles and jetskis alot and I learned and easier way to install piston and rings on my own without a second set of hands
@How2Wrench11 ай бұрын
Hello there. Yes they come in many sizes and designs. Here is an example from our Amazon tool links: amzn.to/450e413 Glad it helped! Thanks! Join the channel. Best $1.99 you'll spend to access all 800 vids and Shane Daily! Smash the sub and like please. Throw Shane a high five donation, channel membership or merch for saving you $$$$$$$ Links below to support more for this work! 🙏 You rock for commenting! We will let Shane know! Want even more? Best $2 you'll ever spend...Join this channel to get access to perks: kzbin.info/door/BhM8DCKnT3qXwTW0eToyCgjoin -Daily MEMBER FIRST COMMENTS ANSWERED FIRST -Live Q/A video chats -Wonder if we have a video on your need? Members can request content links! -Full Access to the ENTIRE 700 video library -Member-Only FREE tool giveaways Ways to support or high five How 2 Wrench! Thank you in advance. YOU MOTIVATE US TO DO MORE! 1. Smash the subscribe button (thank if already a sub!) 2. Have you seen our "KZbin Trained Support Shirts? goodfellasmerch.com/collections/how-2-wrench/products/support-shirt 3. High five donation: www.paypal.me/how2wrench 4. Got an emergency and your head is about to explode from frustration or fear? Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one
@frankalburquerque47287 жыл бұрын
Buddy Thank you so much for Teaching me god bless
@How2Wrench7 жыл бұрын
You're very welcome. If I can ever be of service to you, here is a video explains how to connect with me. kzbin.info/www/bejne/rJvZnnVmZsqVmdU Keep Wrenching, Shane Conley Instructor/Motivator/Motorcyclist www.how2wrench.com Like freebies? Click here for a free diagnostic checklist! gem.godaddy.com/signups/364621/join Did you like this free video and hope to see more? Would you just like to say thank you with a donation? Click www.paypal.me/how2wrench
@rafaeloyola36974 жыл бұрын
Thank you for sharing your knowledge your awesome show time LoL
@How2Wrench4 жыл бұрын
Thank you. Here is a way to support all the free videos. Don’t forget to subscribe too! Want to say “thanks” or “keep it up”? Click here www.paypal.me/how2wrench Coach Conley is also available for hire to personally work one on one with you if ever needed. Your answers and help are just around the corner. Save time and money while protecting your investment and yourself by doing it the right way! Follow us! Web: www.How2Wrench.com www.Tools2Wrench.com
@cigardock48342 жыл бұрын
Thank you 🤘🏻
@How2Wrench2 жыл бұрын
Glad it helped. You rock for commenting! We will let Shane know! You can give him a high 5 here: www.paypal.me/how2wrench Another way to help us back is joining or grabbing our T-shirt! Support links and gear below! Awesome and thanks for commenting! Smash the subscribe button (thank if already a sub!) Have you seen our "KZbin Trained Support Shirts? Great way to "high five us" goodfellasmerch.com/collections/how-2-wrench/products/support-shirt Join this channel to get access to perks: kzbin.info/door/BhM8DCKnT3qXwTW0eToyCgjoin -Daily MEMBER FIRST COMMENTS ANSWERED FIRST -Live Q/A video chats -Wonder if we have a video on your need? Members can request content links! -Full Access to the ENTIRE 700 video library -Member-Only FREE tool giveaways Got an emergency and your head is about to explode from frustration or fear? Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one
@dongking62454 жыл бұрын
Luber is always a good thing to use
@davidanderson39994 жыл бұрын
I use a hose clamp for my ring compressor as I went from 88 to 97” and the piston pin is in ring gap
@How2Wrench4 жыл бұрын
One of these times I will have to actually try it. I've had many folks mention it over the years. I've been fortunate to have the special tools. 👍 Thank you for taking the time to comment! It helps us! Here is a way to support all the free videos. Want to say “thanks” or “keep it up”? Click here www.paypal.me/how2wrench Subscribe and Follow us! Web: www.How2Wrench.com www.Tools2Wrench.com
@MrPolubomu8 жыл бұрын
Awesome videos! Thanks!
@110americalovingpatriot25 жыл бұрын
I like the 2nd way the best. Specially since I dont have helpers.
@indigoyo6 жыл бұрын
Great teacher,thank you for the video!
@RANGOArts4 ай бұрын
I just squeeze the rings with my hands. I have long hands. Or the second way
@JW-he9gb6 жыл бұрын
This video is a big help. Thank you. For your vidos
@gasousman3 жыл бұрын
how can I get a four cylinder jug around all four piston ring sets?
@How2Wrench3 жыл бұрын
Shane has an have an old video on that. Actually just bought a crate of motors to even modernize the video but it will show you what to do. Become a member and you can view it here: kzbin.info/www/bejne/epanm4Shaq2jn9E Let me try and see I can catch Shane to answer quick. His internet is limited right now until the weekend. Shane is in Africa training students this summer. We are just the social media team. He plans on answering channel MEMBER questions each Sunday! Not a member yet? Here are the details! Want him to drop his wrenches and help you? He loves helping members and it is only $1.99 a month to join (more options if you really want to say thank you too) All member tech questions like this get directly forwarded to him every day! Here is how to get in! * Join here: kzbin.info/door/BhM8DCKnT3qXwTW0eToyCgjoin * Just looking to give us a high 5? Click here: www.paypal.me/how2wrench * Is this an emergency and your head is about to explode from frustration or fear? Get Shane’s cell here: how2wrench.com/product/personal-tech-training-phone-facetime/ Note: If you are a new channel member please reply back and we will see your KZbin Member handle in your name. We will have a private member-only FB and web page coming he can directly do Q/A there! Thank you for being patient as our growth has blown up!
@thuyamaw16133 жыл бұрын
Genius!
@How2Wrench3 жыл бұрын
Thank you for commenting. Want more benefits? Smash the subscribe button and bell! Want even more??? Join the channel: -Daily MEMBER FIRST COMMENTS ANSWERED FIRST -Live Q/A video chats -Wonder if we have a video on your need? Members can request content links! -Full Access to the ENTIRE 700 video library -Member-Only FREE tool giveaways Join this channel to get access to perks: kzbin.info/door/BhM8DCKnT3qXwTW0eToyCgjoin Just want to say thanks quick to support us for this information and our work saving you money? Give us a high 5 here: www.paypal.me/how2wrench
@bradb91468 жыл бұрын
I can't stand working on Hoggley-Stevensons !!! : ) I've got a joke for you .... what is the difference between a Harley rider , and a Hoover Vaccum cleaner ??? The position of the dirt-bag !! : ) L.O.L. beg my pard !!
@How2Wrench8 жыл бұрын
+brad b Thank you and please share!
@MidnightExpressMC Жыл бұрын
You didn’t tell the joke right. Skip the rider part, then “On the Hoover, the dirt bag sits on the inside.” Another one: If Harley-Davidson made an airplane, would you fly in it?? 😅 From a Harley rider in Southern California ~ Ride Forever! 🦅
@speedball10006 жыл бұрын
will 06 1200 sportster cyliners fit on 96 1200 sportster
@How2Wrench6 жыл бұрын
It's on my list to make a video on a cool method for researching parts for cross-reference. Sign up as a member and I will teach you how to do it for all parts or I will look it up for you my friend. Here are the links: Have you Subscribed yet to never miss a video? Have you seen the video playlists kzbin.infoplaylists ? Still have questions? Coach Conley provides tech help and works one on one! His KZbin and training center has grown beyond the ability to answer every question (11 million views! Over 500,000 a month!) He gets 300-400 requests a week. Become a member for his direct cell phone number and personal assistance! Click here for the membership links and welcome to the community! how2wrench.com/product-category/specials/ Want to say “thanks” or “keep it up”? Click here www.paypal.me/how2wrench Your answers and help are just around the corner. Save time and money while protecting your investment and yourself by doing it the right way!
@gagopiti70025 жыл бұрын
i love a piston bike so my cycle
@glennharrell72757 жыл бұрын
How good does the method 2 work on Harley in frame motor rebuild ?
@shaneletson4 жыл бұрын
Since no one seems to no I'll ask here witch way does the mess exspander ring go in when its installed on the piston does it come together as a ( m ) or a ( w )
@How2Wrench4 жыл бұрын
Good question. I'd like to answer deeper than yes or no. Can you sub and I'll circle back? It really helps us creators grow. Appreciate you! You can always give us a high 5 here: www.paypal.me/how2wrench
@shaneletson4 жыл бұрын
It comes together as a (w) is what Barton power sports told me n johnsburo ar
@jshenbdjwla14637 жыл бұрын
damn i bet Thats a sweet class.
@erussell10817 жыл бұрын
hey man, its still a good method to put it on :)
@How2Wrench7 жыл бұрын
Thank you for the kind words! Head over to the new website and subscribe to the newsletter to never miss a video or newsletter! how2wrench.com/contact/ If I can ever be of service to you, here is a video explains how to connect with me. kzbin.info/www/bejne/rJvZnnVmZsqVmdU Keep Wrenching, Shane Conley Instructor/Motivator/Motorcyclist www.how2wrench.com Did you like this free video and hope to see more? Would you just like to say thank you with a donation? Click www.paypal.me/how2wrench
@AmericanDefender4 жыл бұрын
Would you suggest method two on a 4 cylinder engine? I'm working on a 79 gs1000.
@How2Wrench4 жыл бұрын
I have a REALLLLLLLY old video on it that needs updated...Here is it: kzbin.info/www/bejne/epanm4Shaq2jn9E Still gets the message across. 😊 👍 Thank you for taking the time to comment! It helps us! Here is a way to support all the free videos. Want to say “thanks” or “keep it up”? Click here www.paypal.me/how2wrench Subscribe and Follow us! Web: www.How2Wrench.com www.Tools2Wrench.com
@AmericanDefender4 жыл бұрын
@@How2Wrench I've actually watched that video before. I'm working with the engine still on the bike by myself. This is the second time I've had to replace the jugs and I'm just curious between both methods which is better? I also don't have a small enough piston rings compressor. I used hose clamps last time but I really don't want to again if avoidable. Last time, after getting the bike together, I had no compression. I found that the rings were stuck in their grooves and didn't expand. I'm curious if that was due to the hose clamps? I don't see how, but I've seen a lot of weird things working as a heavy line tech for Dodge. I have ran a ring groove cleaner on the pistons again and did find a very small amount of carbon that was missed. I speculate that's why they stuck. I apologise for rambling. I'm just trying to cover all my bases before I move forward and spend another 80 bucks on gaskets.
@How2Wrench4 жыл бұрын
@@AmericanDefender Have you seen how cheap the "right tool" is? I'll out a link below. amzn.to/2ZrYb3D or amzn.to/2NQgPN2 I did a quick check on your stock bore and it showed 64.8mm (www.google.com/search?q=79+gs1000+bore+size&rlz=1C5CHFA_enUS718US718&oq=79+gs1000+bor&aqs=chrome.2.69i57j33l3.13783j0j7&sourceid=chrome&ie=UTF-8) I personally like to first one with the short clamp band width. Nice for getting in and around studs. I don't want to discredit clever ideas but when it comes to piston rings, I find the tool is much wider and correct for installation without damage. As to why the rings compressed and did not release I have an amazing video showing exactly. I am in the process of editing it for our new members/donation site.
@kyleessary19746 жыл бұрын
Very helpful. Thank you
@carlgar20074 жыл бұрын
I like it
@How2Wrench4 жыл бұрын
Thanks Carl.... We sure love you taking the time to comment. Are you coming to the next live session? There a few ways you could help keep this work going and stay connected with me personally. 1. The fastest and best thing you could simply do for us is hit that subscribe button…helps us creators more than you know! 2. Join this channel to get access to perks: kzbin.info/door/BhM8DCKnT3qXwTW0eToyCgjoin 3. Give us a high 5 here: www.paypal.me/how2wrench Keep Wrenching, Shane Conley Peoria, AZ USA Follow us! www.How2Wrench.com www.Tools2Wrench.com Facebook: facebook.com/How2Wrench/ Instagram: instagram.com/how2wrench/
@carlgar20074 жыл бұрын
@@How2Wrench no problem, I liked it because I'm in the middle of an 07 Yamaha YZF R1 valve job. and on the 07's and 08's R 1' if you take the cylinder of the motor you have to due the same. However, as you know thr R1 is a inline 4 cylinder, making things a little bit hard.
@How2Wrench4 жыл бұрын
@@carlgar2007 Nice...over 700 vids on here so we may be of more help...lots of perks like requesting video topics to not have to search for them and member only perks and q/a Join this channel to get access to perks: kzbin.info/door/BhM8DCKnT3qXwTW0eToyCgjoin
@carlgar20074 жыл бұрын
@@How2Wrench Thank you dude, I've doing this kind of work for 45 years. I wanted to be a motorcycle mechanic when I was young but at the time there not a lot opportunities for it. so worked in the automotive industry for 22 year, graduated with a degree in Computer science and went to work in the automation industry. However never stop working on bikes.
@How2Wrench4 жыл бұрын
@@carlgar2007 Nice...Stay connected...
@abbasali3100 Жыл бұрын
Gold wing flat 6
@How2Wrench Жыл бұрын
Glad it helped! You rock for commenting! We will let Shane know! Ways to support or high five How 2 Wrench! Thank you in advance. YOU MOTIVATE US TO DO MORE! 1. Smash the subscribe button (thank if already a sub!) 2. Have you seen our "KZbin Trained Support Shirts? goodfellasmerch.com/collections/how-2-wrench/products/support-shirt 3. Join this channel to get access to perks: kzbin.info/door/BhM8DCKnT3qXwTW0eToyCgjoin -Daily MEMBER FIRST COMMENTS ANSWERED FIRST -Live Q/A video chats -Wonder if we have a video on your need? Members can request content links! -Full Access to the ENTIRE 700 video library -Member-Only FREE tool giveaways 4. Got an emergency and your head is about to explode from frustration or fear? Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one
@abbasali3100 Жыл бұрын
@@How2Wrench gold wing flat 6 is pain to merge the two blocks you need a wooden peice to let the rods and pistons straight and compress the rings while attach with wire so you can pull them out
@How2Wrench Жыл бұрын
@@abbasali3100 We asked Shane and he has a solution he uses to ease this.
@smileyrod118 жыл бұрын
wear can i get this tool form let me know thank nice vidieo
@How2Wrench8 жыл бұрын
+pedro rodriguez Thank you and please share! Any commerical tool vender sells these. Or motorcycle shop.
@smileyrod118 жыл бұрын
THANKS BRO
@nishadebrahim89222 жыл бұрын
I saw that indian baner I'm a indian
@How2Wrench2 жыл бұрын
Hello friend...Did you know Shane grew up on reservations in the midwest and his step-father was Sioux... You rock for commenting! Grab our T-shirt! Support links and gear below! Awesome and thanks for commenting! Smash the subscribe button (thank if already a sub!) Have you seen our "KZbin Trained Support Shirts? Great way to "high five us" goodfellasmerch.com/collections/how-2-wrench/products/support-shirt Join this channel to get access to perks: kzbin.info/door/BhM8DCKnT3qXwTW0eToyCgjoin -Daily MEMBER FIRST COMMENTS ANSWERED FIRST -Live Q/A video chats -Wonder if we have a video on your need? Members can request content links! -Full Access to the ENTIRE 700 video library -Member-Only FREE tool giveaways Got an emergency and your head is about to explode from frustration or fear? Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one
@DanielHansenTrades2 ай бұрын
Yeah this will not work on my 4 cylinder engine
@How2Wrench2 ай бұрын
Might be a good idea to list your engine....just a thought...
@DanielHansenTrades2 ай бұрын
@@How2Wrench it’s unlikely not your tricks, it’s me being a newby
@Frankfoot9865 жыл бұрын
Method 2 awful lol spend the bucks on the ring compressor or rent one from Autozone haha