How To Install DeepCool AK620 Digital CPU Cooler

[@AquaLady153]

i use coffee strainers instead of paper towels so any paper isnt left behind. I also heat up my cpu to easily remove thermal paste

[@BuildsWithV]

Nice! Great tip with the coffee strainer, thank you 🙏

[@PCgamerChannel]

Only guide that actually shows the cable connections and where everything goes.

[@dotlacity]

My case turned up to be too small for this cooler. My ram is too big... So the tip of bringing the cooler to the back was great tip! It saved me

[@lazypioneer91]

If you put the fan at the back and middle, you better put the middle one against the front tower instead of the back tower so it can suck air from the front part of tower instead of the space between the 2 tower like in 7:16

[@dotlacity]

​@@lazypioneer91 what do you mean? It was always meant to suck air from the front, as it is shown in the video. No fan of an air cooler supposed to suck from the back.

[@lazypioneer91]

@@dotlacity make it like this (Fan1)[Tower1] a bit of space (fan2)[tower2] Instead of (Fan1)[Tower1](fan2) a bit of space[tower2] Dont make both fan latched to tower 1.

[@emiliofilipigh]

Dude, I have to tell you this, I LOVE YOU!! that backplate wasn't around and I was just panicking!!! THANK YOU SO MUCH!!!

[@ObnoxiousWhite]

Legend mate. Was struggling with the cables. Great video. Subscribed!

[@SapphireLawliet]

Thank you so freaking much ! I just installed it and everything works perfectly, I don't know a lot of building pcs but your tutorial was simple and direct (it took me like 3 hours bc i was afraid of breaking or ruining something 😅 but it's all good!) , thank you again for this :)

[@itachi7976]

I heard the thermal paste comes with coolers aren't that good is this same with AK620?

[@BuildsWithV]

The paste that came with this I wouldn’t have any issues using imo but it never hurts to get something that’s been proven to be good. I always replace thermal paste at least once a year so I’d probably use this for first year and then upgrade.

[@JustNotIt9927]

You sir are my savior. This is my first time building a pc. I went with the fractal north case so i wanted an air cooler to make a nice aesthetic, ended up buying this one. Hopefully it keeps my cpu temps low. I'm using the 7800x3d and the 4090 founders edition!

[@BuildsWithV]

Glad I could help 🙌 This cooler will definitely keep it at good temps and the aesthetic is definitely there! Thanks for watching 🙏

[@jacemiranda6510]

are you having good performance with it? I'm getting my new pc parts shortly and I'm planning on running the 7800x3D and a 7900 XTX

[@guilhermeam9990]

@@jacemiranda6510 how is it going today man? I bought the 7800x3d and I'm thinking of purchasing this cooler as well

[@DimerNL]

Thanks man, great seeing in detail where to plug which cable into.

[@centurion1209]

Thank you so much this was exactly what I needed to help me

[@BuildsWithV]

I’m glad I could help 🙌 Thanks for watching 🙏

[@mrkurtuldu]

Hi buddy I bought a DeepCool LE520 liquid cooler and I have a B450M A II motherboard I don't know how to make the connections can you explain me

[@M3rp21]

As a person who's been building PC's for the better part of 10 years, this is a really well-done video. I'm actually installing this cooler on my updated build this weekend, first time doing air compared to an AIO. I'm thinking of using my Lian-Li Infinity fans instead of these, what's your thoughts?

[@BuildsWithV]

Thank you very much 🙏 I really appreciate that! I think the infinity fans would look stunning in this. Maybe not in the center since that’s covered up but what if you did 2 infinity fans (one on each side) and then keep the stock fan in the center. Maybe too many fans but might look cool 😅

[@M3rp21]

@@BuildsWithVI’ll let you know if it works out!

[@balood]

My question is how do you connect the RGB fans to an addressable RGB connection, if you use it for AK620?

[@thetruthh.8836]

Why there are two argb connectors?

[@theris117]

How did you line it up so easily? I swear the bracket on the heatsinks is like ¼inch too short to get both studs in

[@BuildsWithV]

You may have one of the cpu brackets upside down. Double check that first

[@theris117]

@@BuildsWithV I 100% did and forgot to delete this thread.

[@BuildsWithV]

@@theris117 no worries, glad you got it fixed 🙌

[@ciarankearney]

Thank you!! Struggled with the cables this really helped

[@arcywafu]

i dont have a 3pin on my motherboard, will it still work even if i dont plug it in? what's important is the USB and fans right?

[@jeksewnoleeray1020]

Good stuff, just be cautious with the direction you mount the fans, my motherboard has a bulky io cover that prevented the CPU fan from being mounted in a certain orientation and I had to flip it.

[@arooshkhan2316]

Great video. I just bought all parts for new build including the same deepcool cooler. Will watch this video again and will fit it ❤❤

[@AnonymousSpidey]

This actually helped me so when I do my am5 build thanks for this!

[@pilotingthroughlife]

Can you tell me how did you put that temps monitor at the bottom of the case ? What screen and which software? Thank you

[@gamerdaddy2570]

will it fir with corsair vengence rgb stivkd

[@Anjay3501]

I have question , if i dont plug that 3 led pin , will the screen still work if only use usb cable?

[@ibrahimsahin8003]

What ram sticks where you using?? It seems the cooler didnt block your ram slots. Or are your rams height shorter?

[@regisegek4675]

will they make front bay version???? instead of the bottom

[@hailblue221]

also u said it’s ok to put front fan in back so ram rgb can show i’m thinking, does this affect thermals???

[@renai7575]

Is it better to install this cooler in the PC Case or outside on the MB?

[@R3n7on82]

Nice guide. I just bought the same cooler and it´ll be arriving next week. One question: you actually have CPU_FAN + CPU_OPT conectors in your motherboard, why you just connect both fans directly instead of using an splitter adding more cables to the build?

[@nishidrai7951]

Will this fit the montech XR?

[@ryanilagan6266]

How do you change the RGB? dont see any option to change the color on the software

[@circawut]

just purchased this for my build. thanks for video

[@Viking8888]

Hi, I was curious if you ever tried connecting the cooler's ARGB panel to the CH560's included ARGB controller? I have the same case and cooler and notice that some of the LED's on the cooler's panel will not light up when connected to the controller in CH560 Digital. Deepcool sent me a replacement panel, but the same thing happens. If you haven't done this, could you do me a favour and test it and see if all LED's light up for you? Thx in advance.

[@vinztheprinz8752]

Hello sir! Does a liquid freezer ii 360mm fit in that ch560 case? No problem with ram clearance?

[@hoijamm]

can i swap the fans with arctic p12 argb?

[@albertoknoxx1309]

yow, do I have to install the software to make the led hud show up?

[@emidrumss]

what's the small led panelmodel name with temperatures on the case side?

[@pistonhead123]

Perfect video helped me alot to install the same cooler 👍

[@djvne]

does the splitter cable come with the cooler? anybody know? just got my ak620 digital zero dark delivered today, plan on installing it

[@Hunterluz2]

What's the little cpu/gpu temp display you got in your case?

[@BuildsWithV]

@@Hunterluz2 that comes with the case I used

[@royalcinnamon]

Any Idea of which RAM sticks can I use? Since the RAM Clearance is 43mm, could it fit Teamgroup Delta ones?

[@astadzz]

what is the reference of the mini screen and you see the temperatures?

[@joelrodriguez1689]

Great video brother. If you don’t mind me asking, how do you change the rgb of the lighting strip around the screen?

[@hailblue221]

so i can’t get software to work which one specifically on there web site?

[@Gigga9]

Thanks for vid I will use it well, would you recommend the original of this or the digital version?

[@lucasjuniorproducer]

Hi, does the cooler came with the split pwm cable? Thank you

[@DimerNL]

Yes it does

[@moonfire3885]

One end of the cpu cooler (where the screw is) does not line up with the other bracket on my motherboard 😢 I don’t know what to do..

[@BuildsWithV]

Check to make sure you’re using the correct bracket for your motherboard and cooler. Also make sure the brackets are installed in the correct orientation. What motherboard (or cpu) do you have?

[@moonfire3885]

I am so silly, I had one of the brackets upside down this entire time..that’s why there was a little bit of space on one end 😅

[@LoloSolo-op3mg]

Friend, what should I do with another one? there is another plug there, which is covered with a case, and there are 3 more pins, what are they for? I've reviewed it 10 times, connected it properly, but still there is one with the case closed, it is not used

[@louisd695]

can it also disply CPU usage? from what I can see it only display temps

[@BuildsWithV]

@@louisd695 it’s just temps from what I remember

[@biasaF]

Hello, I built an ak620 with LED too. However, it is not showing the temperature numbers, can you help me?

[@Gamehighlight2023]

What is the little display monitor for CPU/GPU Temps ? Thanks

[@lilbuddy324]

It comes with it

[@Međed-p9s]

Best tutorial Iv find

[@kipoyedcl]

i had mine running but i connected the 2 fans on the CPU_FAN and the CPU_OPT respectively without using the splitter, is there any difference in them?

[@BuildsWithV]

No difference, both run the same. The opt is just optional. Typically you’d use that for a pump or something similar but can be used for fans

[@alextmn6216]

Ciao mi piacerebbe vedere come hai collegato tutte le ventole tra di loro, perché le mie sempre Deepcool hanno 2 cavi uno a 3 pin e uno a 2

[@denniskousto9497]

Such a well done, informative, tutorial.

[@BuildsWithV]

Thank you, I appreciate that 🙏

[@danieldc4175]

Awesome step-by-step video, this is exactly what I was looking for. Quick question, can you use the aida64 or hwinfo on the display?

[@aldumnarx]

Hello, good afternoon, it would go well with an i5 13600kf, will it keep it cool?

[@brunorodrigues-1021]

can i chain the case argb fans 3 pin 5v on the extension ? my mobo only has 1 header for 3pin 5v

[@BuildsWithV]

You can but I’d recommend a rgb hub.

[@melvinbaquiran9647]

@@BuildsWithV i already bought mine and install however no D_led on my mother board and ill try to buy 3 pin 5v on the extension. what are the consequence using on it?

[@endless031]

Is AM5 installation similar to this?

[@BuildsWithV]

@@endless031 yeah very similar

[@adambailey1993]

I actually just recently got the black version of the AK620, Do you know if the display turns on when you power the PC on?

[@BuildsWithV]

I believe it should turn on at startup or once it’s fully on. I don’t remember but yes once the pc turns on the screen is supposed to turn on.

[@MadBront]

Can this cooler be installed on the Asus H610M K D4?

[@qqarat]

Hey, the website for the software isn't up for me. Any way i can find other alternatives?

[@graygryphon76]

Having same issues with website down (for over a week), no luck locating software for this?

[@Simpsonsarabia]

Ag400 digital plus has two rgb 3 pins 😢 it's bit confusing

[@ijax4724]

Can it cool a Ryzen 7 7800X3D? Or can you recommend a cooler for a Ryzen? 2024

[@Yandross]

Would there be any room for GPU vertical mounting? This cooler looks pretty big. Thank you and very good video.

[@BuildsWithV]

Yeah the cooler is too big for vertical gpu. Maybe with one of those mounts that allows it to sit at an angle but even then I don’t think it would fit. Thank you 🙏

[@mekloten]

I have ordered the AK620 Digital with a vertical GPU mount for my XFX QICK 6750XT. The build arrives saturday, will report back on sunday if it fits.

[@abeidsalim8008]

Can you vertical mount the gpu?@@mekloten

[@willex1337]

@@meklotenso did it fit?

[@Fl4wles5]

I'm 36 years old and this is the first time I've seen someone using so much thermal paste in my life, lol Joking aside, lovely build, bro. I'm trying to figure out which AC should I buy. My problem with the AK620 is this outside fan blocking the RAMs :(

[@BuildsWithV]

@@Fl4wles5 yeah I tend to put too much 😅 I’m very bad at “eye balling it”. I need measurements lol for cooking and for thermal paste. Thank you, I appreciate that! Yeah this cooler is beautiful and works very well but blocking the ram is unfortunately a deal breaker for many people. I got lucky since I had such low profile ram sticks

[@professionalbilmez4874]

May I know the name of the computer case?

[@LuisWayne8]

Why it didnt fit on my case? II cant put the crystal because of the cooler

[@asdfghjkl89741]

Very helpful thanks!

[@emilyhossen7425]

thank you for being so thourough and meticulous, i am a common idiot and you helped me understand everything! gold star to you :)))))

[@BuildsWithV]

I’m glad I could help! Thank you for watching and your awesome comment 🙏

[@atrothe]

Thanks for that. No wasted time or yakity yak bullshit. Well done.

[@aleman9959]

I love this CPU Cooler but its enough for an I9 12900K?

[@BuildsWithV]

Yeah it’ll work perfectly with the 12900k

[@_quarterroy2325]

I cannot get my AK60 to show the temp on the display for some reason

[@Gamehighlight2023]

Awesome.....I purchased the black one same model one week ago and temperatures were too high so I took it off and ordered an AIO from Deoop Coo...installed it and again high temps. when palying games it stays in 86C. Disappointed in Deep Cool.

[@KhaiFirst]

saw this for sale 60$ can this cool R7 5700x3D?

[@rizkiindraprayoga1172]

Does it work with corsair ddr4 rgb ram? Is it stuck or not?

[@BuildsWithV]

@@rizkiindraprayoga1172 I think the corsair might be too tall but I’m not positive unfortunately

[@rizkiindraprayoga1172]

@@BuildsWithV cooler fit with corsair rgb pro ls on coolermaster TD 500 mesh. thanks man the cooler is chill more than aio watercooling. my cooler was permafrost 240 from silverstone for about 4 years

[@Unknown-qr7mj]

Bro can i put that front fan into the back. It blocking my RGB ramns 😢

[@TheSaddy]

I've been thinking of the same thing, also because my RAMs are pretty tall. If I'm not wrong, unless you don't change the direction of the fans, you should be good. Actually he mentioned that at 7:50.

[@Unknown-qr7mj]

@@TheSaddy I end up buying ak500. Which is good and not blocking my ram.

[@TheSaddy]

@@Unknown-qr7mj ah alright, I’ve bought the AK620, but since I’m still waiting for the ram to come(corsair vengeance rgb DDR5,which are pretty tall), I had this doubt until now

[@seanchina9902]

how is the fit with your rams?@@TheSaddy

[@TheSaddy]

@@seanchina9902well, at the end I got the non-rgb ones, cause of some problems during the delivery, and I would tell you that it fits perfectly. So probably the rgb version would cause some problems, so you will probably have to move your fans location or either, put the fan,the one above the ram, a little bit higher

[@tomateseco4951]

There Isn’t “USB” on my motherboard, only “F_USB1”. Can I plug in there? (Gigabyte B550 DS3H rev. 1.7)

[@JSantos809]

The temperature display is not showing on mine 😢

[@mAdcaTzm4a1]

Anyone tried using a coolermaster vertical gpu mount with ak620?

[@k24skin]

My question isn't related to the installation of the AK620 but, instead "Will it be a good enough CPU cooler for my new 5800X3D"??? :s

[@chasebroyles6585]

Yes.

[@k24skin]

@chasebroyles6585 so, can I ask what temps you were getting with your 5800x3d using the AK620?

[@chasebroyles6585]

@@k24skin I have a 7800x3d and with tuning I have seen a max of 73 degrees. You should never throttle with a 5800x3d.

[@phantom0590]

@@k24skin 80 degrees at 100% load for my 7600, and around 55 degrees at 50% load

[@WishIhadacabinonthemoon]

Received mine a few days ago, thought it worked good until I noticed that anything I tried to open, Chrome, Steam, Battle net client etc, they took forever to open. I turned off the Deepcool software and everything was back normal. Now I just use it as Cpu cooler with no digital display

[@jhoper99]

any update what happened now?is there any latest updateto fix the issue?

[@WishIhadacabinonthemoon]

@@jhoper99 I haven't seen a new update yet. I have it turned off and just use it as a cooler . I use my other software to watch temp.

[@kingrises1499]

Dose it work for 5800x3d

[@billbeis7691]

nicely done !

[@keremarslanpay2728]

How do I change the colors?

[@martincruz9196]

aura sync i think so

[@kybersith]

What do I do if I only have one USB port?

[@freefall_910]

Ram clearance can I install a g-skill-trident-z5-neo

[@elgatoslayer1332]

Yes! But you will have to slide up the fan up just a tad bit to make clearance but that will be okay

[@kgreig8365]

​@@elgatoslayer1332, I have that same Ram kit and didn't need to adjust the fan height, as it remains flush with the top of the cooler. That said, I'm thinking of trying the fan on the rear of the cooler, as mentioned in the video, so the RGB on the Ram is on full display...

[@lilbuddy324]

@@kgreig8365hey, did you try that and did it work?

[@lilbuddy324]

@@kgreig8365did you try that? If so were temps ok? Cuz I’m trying to do that cuz I’d like my rgb ram to show, but if it doesn’t work oh well

[@godnamedtay]

Bro why can’t u look this things up? The specs and measurements are all over the internet

[@mariogorilla]

Thanks mate. This is a very details installation with even tips like if we the MB didnt have the 3 pins for the RGB head

[@alurous5595]

does anybody know how to change the rgb of it?

[@Ptica269]

thanks u helped me to instal my gpu

[@GGSagkuiT91]

Finally found it thanks..

[@Chase_Razzz]

Great video V

[@BuildsWithV]

Thanks so much 🙏

[@evgeniynarizhniy6599]

Thanks!

[@Droxy-e4h]

Why take away gpu?

[@dusanvagyok91]

Thx

[@Maikoluan]

No sé inglés pero entendí 😅

[@martinutasi7857]

1:50 If that would happen to Me, I would hang Myself in that instant😭

[@BuildsWithV]

Eh it’s not so bad. It happened to me a few times and only once I bent 2 pins which I was able to carefully straighten out and worked perfectly. It is scary tho! 😂😅

[@Dmitriy_Tkachenko]

Установил недавно эту xpeнь ceбe... Крайне странный индикатор градусника, в браузере пишет 73 градуса, а в играх не более 61

[@jubillejohnhermosilla2552]

spreads better when it's an ex🥶

[@IrnMaiden304]

A little overkill and kinda pointless when you have that screen at the bottom of the case that displays the same thing no ?.

[@0thers1d3]

This is probably the worst comment ive ever read on KZbin. No chance this could just be a spare PC he had to show how to install the cooler? Is he supposed to have a new PC for each part he does an install video of?

[@IrnMaiden304]

@@0thers1d3 This is probably the worst reply I've ever read on KZbin. It's just a question, and one not aimed at yourself. Why not let the person that was asked answer it ?. If any of your speculative sarcastic answers held merit, I am sure they would be answered by the person who made the video / content that was asked. Maybe try not to be insulted for someone else, maybe let them type for themselves. The comment was made a month ago, hasn't been answered yet, obviously they aren't hurt by it, or do creators just highlight comments cause it brings unwarranted drama which everyone knows brings traffic / views 🤔🤨🤷🏻‍♂️. Imagine running defense cause the way you read words, injecting your own context, just to be used to generate " clicks " as they call it.

[@jeksewnoleeray1020]

@@IrnMaiden304 probably the worst reply to a reply that I've ever read. Responded to the reply within a day and posted a lengthy response; clearly personally offended.

[@IrnMaiden304]

@@jeksewnoleeray1020 But you notice something !?, did this person reply back ?, was I wrong about it ?. Some of it was being a smartass though, some was making a point, a little personal, perhaps.

[@Jellybean-fd7cx]

Its a design pattern somehow u managed to not recognize. Its supposed to match the case. However im thinking about using the CK560 instead of this case cus this one on the video looks like a cheese grater. The cooler in the PC is the only air cooler with a screen on the market btw. It looks rly good imo

[@media7597]

Very well explaind,thanks new sub