How to Install Electric Fans on a 240SX!

[@ProdA3J]

The purple inside the car looks so fucking good

[@TrinomCZ]

I'd suggest you to use thermoswitch anyway, wired parallel to one of the switches as a safety device. Even though you forgot to turn it on, it turns on when a certain temperature is reached.

[@OffBeatGarage]

Solid idea for sure.

[@BlakesGarage]

It's coming together so nicely! Looks great.

[@chuckbartowski8194]

Adel, please bring back the old intro breh

[@YourPistachios]

another option would be to wire it to a relay which would be activated by the fuel pump. On my volvo 240 drift car the fuel pump is activated by the ecu to only run when the engine is running so i can keep the car in the on position and not have the fans on, and the fans only come on when the cars actually running. makes sense for me because i only have 1 fan thats only 1 speed so its on all the time. works well.

[@MrJTwiggs]

I know this is a lot to ask but are you ever going to make a video explaining your chassis harness a little bit? Currently starting work on mine and it would be nice to have a comparison. No one that I can find has ever made videos/write up about it other than using a painless kit.

[@wilmercouret3197]

Dude put an insane turbo in that motor!!!!!

[@TalkTime4]

Dat crock colour match at 6:00 Doe ;)

[@chaack70]

paint ur valve cover in same color as engine bay

[@Koukiarch]

bruh that interior paint tho, awesome color choice.

[@240GURU]

Please do a write up of how you made your custom panel for your wiring

[@meister3pc]

should do a diagram for the tube front, since it's the cleanest one I've seen out there and look perfect for the streets.

[@OffBeatGarage]

I have a video on it haha

[@abymondesir23]

much respect and i did not kno that abt the s13 clutch fan thanx 4 the education

[@sajspeed69]

Great video dude.Simple,clean and straight forward. Where do you purchase the dtp connectors? Can you give me some info on which model connector you used?Were they the 4-way ones?

[@thebrowntown1337]

Didnt evn watch yet, but Liked cause offbeat is littt

[@godskiller27]

When you can tell it's an old video because it's pre paint 😂. Good content as always

[@anthonyfriolet-landry9664]

0:55 Green apple rockstar 😍😂

[@MyPandaRawrs]

my fans are wired to the ignition, is it bad to have them running all the time?

[@ParadoxdesignsOrg]

I need this setup.. and my s13 doesn't even run hot.

[@ELMUERTO941]

love how the engine bay look then see the zip tie can LMAO 😂

[@sinjindacosta3999]

I saw you at asb I was in the rx7 and told you I watch your videos lol

[@BandleDesigns]

i predicted you'd change out your monster can in this vid haha

[@nospoons]

Breh , don't make me want to pull my engine and clean up everything rn k bye bae

[@Julius.500]

Where's the turbo and hydro E-Brake bro?! D:

[@OffBeatGarage]

Coming haha I don't have infinite money lol

[@erikd7255]

you should do a how to wire a switch board bro 👌

[@MrPeterFountains]

Car is looking awesome man!

[@BrmP]

i dont know that much about building/working on your own car but i have to ask why do you have a pipe going from you radiator to a soda can doesn't really seem like a normal thing to have in your car

[@OffBeatGarage]

It's just for a coolant overflow. Very common to do on built cars instead of running a traditional overflow tank.

[@BrmP]

OffBeat Garage That is intresting why do you not have a "normal" overflow tank? I really feel like I learn a lot from you video's, or Every time I post a comment so Thx a lot for all o that!

[@OffBeatGarage]

Because of the tube front there's no room for the stock overflow tank. So you would need to make a custom overflow tank, or universal overflow tank with custom brackets. Which in comparison would take a few hours and around $50-$100 vs. 30 seconds and a can haha. I'll be doing a proper setup later on with a swirl pot but for right now there are more important things to worry about than an overflow tank haha. Glad to hear it!

[@diegoalvarez4737]

What else do you have running from the dashboard?

[@OffBeatGarage]

+Diego Alvarez accessory, ignition, start, fan, fan

[@spade0655]

I'm doing this now could I just cut off the connectors that come with the fans and hook up the old plug from the Oem fan to the new fan would that work?

[@PrimeGameStudios]

Are you going to flock the dashboard?

[@alejandrobmx488]

Is this a push or pull fan? Just wondering because I want to run the same setup

[@ScreamMnky]

Do a battery relocation video?

[@extremeheadbanging]

Hey Adel! I know you explained your busy schedule not long ago, but I was wondering when we can expect another video at the track. Also, can we get some videos on the vert?

[@OffBeatGarage]

+extremeheadbanging Track videos won't be for another month or so. I need to have sponsor obligation videos done as well as the roll cage videos done before anything else comes out. Videos on the vert yes. Nikita took it apart right now and just waiting on aero, wheels, and paint before getting back on the road ;)

[@extremeheadbanging]

Totally understand that dude! Keep up the good work, I really enjoy the videos

[@OffBeatGarage]

Thanks buddy :)

[@kevinibanez6461]

So your running it without a relay or fuse ?

[@XxLilMexixanxX]

Hey just got my 240sx just like yours and looking for some parts. Like driver door panel, Fender etc. also located in SoCal was just wondering where do you get your stuff

[@OffBeatGarage]

Socal 240 group on facebook and craigslist

[@tonypengo]

awesome video as always!!

[@insainmonst3r327]

Just watched your last video about the paint and you said you were coming to japan. What part of Japan you going to? I live in Tokyo is why I'm curious.

[@OffBeatGarage]

+InsainMonst3r Flying into Narita and staying pretty much solely at ebisu for 2 weeks.

[@Mitchellkzk]

how often do you have to change your coolant pop can?

[@OffBeatGarage]

+DOHC GANG Never. Unless I take the car apart or hit the can doing something and smash it haha

[@brandonbdl]

Mine didnt come with hardware. The box was pretty beat up, so I'm guessing it fell through the box 🤦‍♂️

[@himeh702]

night thrill loves you

[@rubend.7858]

Damn I ordered one and a radiator but on back order so I got mishimoto

[@brianspiess1420]

So ur not supposed to drift with the fans on?

[@OffBeatGarage]

You do drift with the fans.

[@abadibi]

that paint looks better than beyonce naked in my bedroom.

[@Linkcms2town]

Where did you get the DTP connector?

[@dawsonfoster5443]

Thanks for the video, they didn't give me bolts in mine :(

[@yobrojsbxhsb3118]

Hey man was wondering what turbo you will run in the future a single or twin and what type???

[@shaun6437]

Marcus Brady he recently went to Japan and when he got back he said on snapchat he's going to save up for a surprise for a couple months (he said what it is but I don't want to give it away to everyone)

[@THRASHER4LIFE100]

whats the color code for that purple anybody know?

[@joaopinto3488]

why ú not clear all motor for stance/ more beotiful

[@joshmcdermott4471]

Is Adel sponsored by ISR?

[@OffBeatGarage]

Yes

[@broke_miata]

OffBeat Garage sick

[@tylerlaw3569]

Where did you find those switches? I really like them but I have regular toggle switches

[@OffBeatGarage]

Off of Amazon. Search Rocker switch and it should come up.

[@tylerlaw3569]

thanks bro, cant wait to change mine out

[@raromero6]

You're a smart man

[@pie7332]

Is the can like holding excess coolant for the radiator?

[@taylormullis4942]

Ed Callahan its an overflow...most tracks require them

[@decasucecova471]

You should flock your cockpit :)

[@Dolphinblonde]

Could you explain your battery relocation having a bit of trouble on mine

[@OffBeatGarage]

What exactly about it?

[@Dolphinblonde]

OffBeat Garage do you use fuses? What block do you use from the starter/alternator etc.

[@OffBeatGarage]

Used an 80amp in line fuse for that. Super cheap one too from like Fry's that people use for car stereo's because we realized like 3 hours before the car had to be running that we needed that fuse haha.

[@Dolphinblonde]

OffBeat Garage appreciate it man! Keep up the content I enjoy the channel!

[@OffBeatGarage]

StayBondedCrew Thanks!

[@Primer2toneGarage]

Bro, but what about your A/C controls??? 😂😂😂

[@OffBeatGarage]

Haha what is a/c

[@bartrd50mx79]

OffBeat Garage power loss

[@MansellBoxing]

Wheres the rest of the roll cage videos?

[@OffBeatGarage]

I said in the update video I'm going to be releasing all of them within one day. So still working on editing like 4 full build videos to drop all at once.

[@MansellBoxing]

***** yhh i watched that, i thought they were all coming out next but i can wait. Don't take too long haha

[@OffBeatGarage]

Oh yeah haha not next. Cause that's a loooot of work to edit haha. So putting out smaller vids in between editing the bigger ones so you guys can have something to watch. Within the next few weeks I want the cage videos to be done though.

[@MansellBoxing]

***** It's really weird watching it in the mixed timeline you got going lol I'm always thinking shit did i missed something

[@OffBeatGarage]

Yeahhh haha I know. But it was either keep everything on the same timeline and barely upload videos and hear you guys complain all day haha. Or go on a random timeline, give you guys more content more often, and minimize the complaining haha.

[@professoreakapumpernickel3616]

hi

[@Purgso]

How do you dispose of coolant?

[@OffBeatGarage]

Drop it off at the local PepBoys

[@thatswrek]

Is there one for SC300???

[@MadCrazyGaming]

Marc no

[@cleaned5772]

are you getting a new dash later?

[@OffBeatGarage]

Nope, filling in the cracks on this one and wrapping it. No point in cutting up a clean dash.

[@cleaned5772]

OffBeat Garage oh, ok. Cant wait to see the final product👌

[@OffBeatGarage]

Thanksss

[@Kevvedajsel]

Adel the type of nicca to build his car from the ground up but then put the old cracked dash back in

[@Kevvedajsel]

Oh shit didn't think you'd see me breh, just busting your balls man but lowkey didn't know that. #Expertlevel2hardbrehilljustsitdown

[@OffBeatGarage]

Hahahahahahaha dead.

[@Kevvedajsel]

Put it on snap wanna see that shit lmao. Nah but I got a serious question about the shifters actually while I still got you. Are they universal fit in that they just screw on or do you have to mod the mount for other cars than 240s?

[@OffBeatGarage]

Oh it will be on snap for sure haha. Still deciding on the fabric to go with and all that but it'll be pretty good when done. They are universal that just screw on. They are available in either an M12 x 1.25 or M10x1.25 . So as long as your car has one of those two thread pitches then the shift knob will work :)

[@Kevvedajsel]

***** No way haha that's dope as shit! Ah okay I'll have to check tomorrow (2 am atm) and put an order up if they fit. Fck it I'll just glue one on if it doesn't fit they look hawt!

[@FknClarence]

nice vid bruh

[@romanopage9167]

are you sponsored by isr

[@OffBeatGarage]

Yes

[@Jabb2531]

thats the color please

[@rafaelpereira9803]

why dont you go sr20

[@rafaelpereira9803]

?

[@Ratbagsocialist]

because 0.4 L plus turbo makes moar powah not reliably but he plans on going 2j

[@lucasb5243]

2j? where did you heard that?

[@Ratbagsocialist]

im like 90 percent sure hes said it in a video just can't remember which one

[@koziolek9734]

SRS Production he said he would turbo the ka most likely

[@Marky31299]

How much for horse?

[@nospoons]

Mark The Shark horses here In the u.s. Can run anywhere between 5000-1,000,000 depending on breed and shape and age. If you want to narrow your question I'd be glad to help out. Weird finding a fellow horse enthusiast on a car video

[@Marky31299]

dallace seiuli which taste best?

[@MyLonewolf25]

Mark The Shark I prefer Arabians or mustangs for taste

[@MrPrimo98]

Why did you go to all the effort to paint the interior only to put in a badly cracked dashboard? Wouldn't you want to put a nice one in??

[@OffBeatGarage]

+Hunter Hills Because I'm not a dick so I'm not going to cut up a clean dash that are hard to find just to fit around my roll cage. Instead I chose to cut up a worthless cracked dash, that I can then fill and wrap in a nice fabric in order to repurpose old parts and keep clean parts in circulation.

[@MrPrimo98]

OffBeat Garage oh ok that's very thoughtful. Here in New Zealand 240sx are rare so I didn't know dashboards are rare. Good to know :)

[@izaaz_h]

Hunter Hills We dont have 240sx's, we have 200sx's (crappy euro ones but still cool) and 180sx's (awesome jdm ones)

[@abymondesir23]

OffBeat Garage well said

[@jengal259]

@@OffBeatGarage makes perfect sense

[@jeffdope5602]

heyy papi

[@Mrprodigy7801]

i wanna do an exact setup but still have no idea how to wire, i wanna have 2 switches inside

[@audmyr]

👍👍

[@vasileiosgiannoutsos1699]

use the old intro

[@brandonlopez8323]

BREH

[@motokingz7890]

This dude has a can on his hose lol

[@illduitmyself]

thanks for not showing us anything but switches

[@Onhaey]

You should throw an ls1 in there

[@MyLonewolf25]

Akizzem he won't I've talked to him about it XD

[@kevincampos68]

here

[@Z32orDIe]

man all that gorgeous custom metal fab and youre still rocking the stock intake plastic pipes? looks like cancer in your bay bro.. fix itttttt

[@OffBeatGarage]

+preprodigy No duh lol. All that's getting replaced in a few months. Why would I bother spending my time to make something that is going to get replaced in a few months?

[@Z32orDIe]

haha how am i to know this. im going by what i see and what i see is a trud in a gorgeous engine bay lmao. sorry for commenting. wont happen again ;)

[@OffBeatGarage]

Hahah well now ya know :P Have a good one ma dude :)

[@jonathanschultz2472]

first to say first. boom

[@8ightgeek]

breh i think u should invest in a 2j or something better than that ka

[@devonswindell9735]

Alec Alcalde ka's are capable engines... you don't need 800-1200hp to drift