How to Install Epoxy Flake Floors / Tutorial Video

[@ignatiusgod5935]

you sir are the bob ross of concrete floors

[@mitchelljasmann1337]

I work for a flooring company doing poly coatings. Learned a few new tips ! Thank you

[@ronniebaxter5219]

Nice video, you are a good communicator, easy to follow, practical and thorogh. Keep up the good videos, you are definitely cut out for this type of teaching and training.

[@merlin3921]

Holy smokes this was so well done. Thanks a million for posting this. Super helpful.

[@stewartsmalls2024]

I want a device like a seed spreader for the paint flakes and aluminum oxide sand…and my ocd.

[@nosurf2day0]

If I have a new build with nothing ever being parked in the garage, do I still need to grind the floor for adhesion?

[@juniorsalman1077]

Great video dude. Where can I get one of those carts to help with kneeling while grinding???

[@ConcreteFloorSolutions]

concretefloorsolutions.com/product/racatac-with-chest-support-01rac3cs/

[@warrengebhardt2023]

Can it not just be rolled without squeegee? And no respirator needed, how’s the smell??

[@gilmoreagatep7029]

Is it the same process on new concrete (new house)? Kindly show the process (new concrete garage) Thanks

[@ConcreteFloorSolutions]

exactly the same

[@oscaralvarado5114]

Hi man, graet video,where can i get the rat attack or have another name? Thnks for your help

[@سيدها83]

what's spane life if use in home concrete floor bathroom and kitchen

[@rr8641]

Great video - best garage epoxy instruction video out there. You seem to use the aluminum oxide in all your garage floor projects. It seems like many other folks do not, referring to the added difficulty in keeping in clean. Apparently you place a higher priority on safety (non-slip) than ease of cleaning. Question: Does the aluminum oxide really make it that much more difficult to clean? I'm planning to do my garage and I'm leaning toward non-slip safety vs ease of cleaning. Appreciate any insights you can offer.

[@ConcreteFloorSolutions]

It does not make it harder to clean. As long as you don't apply too much. 1 pint per 400 sq.ft. is PLENTY. kzbin.info/www/bejne/Y5TbqGStpZ2Ie7s

[@ameehasa5504]

Did this type of job need maintenance? How long stay in good condition?

[@mathprof7776]

Great video thank u very much. What was the time between the primer coat and the second coat?

[@ConcreteFloorSolutions]

You can apply the intermediate coat immediately after the primer, or wait 24hrs (recommended for novices). The next coat always needs to be applied within +/- 30 hours after the prior coat.

[@Lyndo753]

Great video 👍 So if I'm grinding the concrete do I still need to do the etching and degreaser like most other people do?

[@Mrgoodguy865]

Nice job, what isbthe size of the flake?

[@merlin3921]

Hi there, if I let the epoxy dry for several days, what grit should I sand it before putting the urethane on? I was thinking 240? Thoughts? Great video by the way. Nice work!

[@samalibrahim9974]

Great informative video and thanks putting it out. I have a question, the video shows that you applied the intermediate coat right after applying the primer and while it is wet, the data sheet indicates that you have to wait 10 - 14 hrs before applying! am I understanding this wrong? Thanks again

[@ConcreteFloorSolutions]

You can apply the intermediate coat immediately after the primer. You do need to understand down pressures of the squeegee so you don't wipe the primer off the floor when you apply the intermediate coat. For a novice, I would recommend doing one coat per day to be safe. The primer and the intermediate coat are the same basic materials with the exception there is some solvent added to the primer so it can penetrate into the substrate.

[@trevor-bd4kt]

So if u grind it u don't have to etch or degrease it? Just vacuum? Seems that will save alot of water drying time! Thanks for the video!

[@bradbenesch5440]

I have an older floor with some stains and some long cracks, how do you prep for cracks?

[@mohammadjawed8386]

well don ! May I ask you to write me the materials name and code to find the same. and how much I've buy for two cars garage ? Thank you

[@richardtomasko61]

Some People are suited for Tutorials U R 1 FOR SURE

[@djlee3]

Really enjoyed the video, even purchased the product. Most of my order shipped, hope I dont have to wait forever for the topcoat. Really wanna see how everything turns out.

[@garciajr4413]

Nice,luckily no cracks. If you would of had cracks what would you have used? Epoxy base patch or water base? Great video thanks.

[@ConcreteFloorSolutions]

concretefloorsolutions.com/product/cfs-fast-set-epoxy-crack-filler-spall-repair/ This material works fantastic. We have many tutorial videos about it also kzbin.info/www/bejne/n3PboKGYpseksM0

[@flacaflyyy]

So clean paint chips after final/clear coat? I assumed you clean the paint chips that didnt stick first - then apply final coat.

[@ConcreteFloorSolutions]

vacuum excess before final clearcoat, then done

[@Icuvist]

Fantastic video! I have 20 years-old paint on my garage floor. I assume all that will come up after diamond grinding to prep the concrete, and I shouldn't have to do anything else before I grind? Thanks for your help!

[@claudiolozano7476]

Hello, is it ok to apply the second coat with the primer still wet? I thought you were supposed to wait 16 hours before applying the mid/flakes coat.

[@mortgagemastery]

what do you do if you have two garage doors and each side slab break ends at different points at the garage door. In other words, one side slab break ends under the door and the other side ends at the outside wall, making it about a 6-8" difference which would look odd. Do i paint the driveway on short side to match the other or vise versa?

[@andrewtanjk1]

Hi , is the aluminium oxide in the form of powder or small small crystals. What’s the size thanks

[@run2sea]

Great video with good practical advice and tips! Key points that I learned include how to walk safely when applying the top coat, applying the aluminum oxide, and the clamp trick for the garage door. If the product is good enough for you to use in your own garage, we'd trust the materials in ours. We'll be buying from your company!

[@ConcreteFloorSolutions]

Thank you for watching concretefloorsolutions.com/online-store/

[@earnestwright4048]

What if I got a 12-in lift up the wall how do I do that

[@albertochavez8067]

I have a new construction garage floor I need to do. It’s a 23x23. The only thing on the concrete is dried up spackle and some paint. Do I still need a diamond grinder or will degreaser work? I see that you did an intermediate coat. Is that necessary? Homeowner would like flakes to cover the whole floor so could I just do one coat? How long will this take? Also how much should I charge? Thank you in advance and sorry for all of the questions. I subscribed and liked as well.

[@ConcreteFloorSolutions]

You always need to diamond grind concrete to get a scratch and remove the Laitance from the surface. Skipping that step could lead to failure. We have always installed and recommended a three coat system starting with the primer to penetrate into the concrete, the 100% solids intermediate coat to hold the flake and 100% solids Epoxy topcoat or polyaspartic depending what your budget is. This is the system we promote and have been using for well over 20 years. It is fail safe as long as you prepare the concrete properly concretefloorsolutions.com/product/500-sq-ft-complete-epoxy-flake-floor-kit/ By all means, if you have any questions about materials or or installation, look me up directly in the video description.

[@anniehuff3172]

Please forgive me for not reading through all the comments for the answer but could you tell me where to get the products from……

[@ConcreteFloorSolutions]

concretefloorsolutions.com/online-store/

[@Toby-xv4mm]

Looks great! Do you recommend the aluminum oxide if you do a heavy flake? What's the working time on the product?

[@alh3745]

I have some areas that are badly pitted. Should I fill in with concrete patch (is there one that you can go over within a day or two with your flooring system) and I assume you still grind it after. Thanks!!

[@chuils]

Could you add a 400 sqft version? My garage is 360sqft. I'm really hesitate to get the 500 sqft kit or not...

[@JimmyLarsen1]

What is the Price to do 20 x 20 garage (for all 3 epoxy’s)? And labor price if possible. And where can I purchase I’m in south NewJersey

[@paulb8264]

Can you do a floor in two parts? I will be doing a large 4 car work shop and I would like to move everything to one side and apply a coating first, then do the other half one the first is done. Will there be an issue at seem? Obviously it's better to do everything in one to if possible. Another question. How well do epoxy coated floors hold up to your work like weld spatter and hot metal?

[@nitinp9670]

need to do it for Outdoor Patio slab, it has a slight dip in corner. Need to level it first (May be self leveling compound) then put epoxy on top. To Prep we can grind the concrete but Do we need to grind the self leveling as well for bonding ? or what else do you recommend for leveling the dip in the corner. Slab is in great condition only 3 years old, no cracks or anything, builder just didn't do a good job. Also what about expansion joint in patio slab, do you cover that with epoxy as well ?

[@ConcreteFloorSolutions]

I would recommend using an epoxy product to do the leveling (make sure you prep well before you apply do you epoxy leveler. Then grind after you apply it so you have a good scratch in the entire floor surface, then apply your epoxy coating system on top of that.

[@jonnathanburgos8892]

What grit were u using on the grinding part?

[@energyflowswhereattentiongoes]

did you put a second coat of epoxy over the oxide stuff or did you just roll it in?

[@deanjagger1190]

You have some stuff left in the first bucket, should you use it on top or the fist layier? Use up the hole bucket?

[@ConcreteFloorSolutions]

When you are installing epoxy floors, the worst case scenario you can have is running out of material. That being said, I always have extra because it's better than running out. If you have a little bit of material, yes you can pour it on the floor and squeegee it around to make it consistent. Otherwise I let it set in the bucket and throw it away. Our epoxy is inert after it sets.

[@nickwest5999]

It looked as if you put the intermidiate coat directly over the wet primer , is there a flash time or recommend time to wait in between the first two coats ? Also did you use the same roller sleeves for the first two coats? Thanks in advance,floor looks great💪

[@ConcreteFloorSolutions]

I wait about 1/2 hour between coats, which it takes that long to set up for the next coat anyway. We do use the same roller between coats when we "wet" coat.

[@steventhury8366]

Great video. I felt like you gave info that matters, and not waste the viewers time. If I do this on new, unused concrete, do I need to grind it? I haven't poured the concrete yet. Is a power troweled finish the best? How long after pour til I can put this on? What do you so where there's joints from separate, but adjacent pours, as well as sawed control joints? Thanks, Steven.

[@MakeupStories1]

What do I do if I broadcast my epoxy flakes unevenly and I ran out of flakes before finishing the floor? I was a little heavy handed in areas.

[@ConcreteFloorSolutions]

Thats why you always broadcast the whole floor first lightly, then slowly reapply evenly over the whole floor until you run out or achieve desired look.

[@gregrcr3]

Very helpful, thanks . One question. In between flakes and top coat. Do I need to sweep or blow off excess flakes that didn’t bond to primer or will it all have bonded

[@ConcreteFloorSolutions]

Sorry about the delay, I did not see this earlier. If you are just doing a random flake like in this video, you do not need to sweep or blow them off. The few random flakes remaining will simply roll in the top clearcoat. concretefloorsolutions.com/product/500-sq-ft-complete-epoxy-flake-floor-kit/

[@edy042]

What grit aluminum oxide do you use?

[@ConcreteFloorSolutions]

blend of #36-#40 grit

[@chiefthunderhorse]

1st day you did primer coat and intermediary … how dry and how long after primer coat do you apply intermediary? Thanks in advance

[@ConcreteFloorSolutions]

As long as you apply the prime coat thin, you can apply the intermediate coat immediately after. This only applies for our material, not all epoxies can do that.

[@chenwu9788]

We are in Canada. There is a lot of salt in the winter. Can we use this floor finishing product?

[@ConcreteFloorSolutions]

We aren't able to ship to Canada at this point

[@TheCureThatKillz]

Great video. Any tips for avoiding roller lines in the clear coat?

[@ConcreteFloorSolutions]

I would have to say make sure it is heavy enough, if you apply it to thin it can leave roller marks.

[@SJones-er6rt]

You could technically use any grinder with a diamond wheel and just go back and sweep/vacuum the dust right?

[@ConcreteFloorSolutions]

That is correct, you just want to get a scratch in the surface for the epoxy to bond to.

[@pamelabell9136]

Where can i find those spike shoes

[@fradda1]

just question would you have to grind if the concrete is freshly poured about 3 months old no heavy traffic? BTW great informative video...

[@ConcreteFloorSolutions]

I always recommend diamond grinding. If you have laitance on the surface, it will give you the illusion of solid concrete and after you coat it, it can peel. The best way to guarantee a good bond is a scratch in the concrete from a diamond.

[@Mule-mh2ms]

Could I do this and not use the flakes? I just want a shiny surface and not much else. Would probably make the floor slipperier but are there any other cons?

[@ConcreteFloorSolutions]

Yes, you can use a single color. The advantage of the flakes is camouflage, if you do damage the floor the flakes conceal it. Here is a link to our solid color kits. concretefloorsolutions.com/product/500-sq-ft-solid-color-epoxy-floor-kit/

[@pingpong9656]

Top job - only thing I might have done different is to go 6 inches up the wall to create a baseboard effect...

[@622mf]

Very nice and fun to watch! what do you do with the left over / waste product?

[@ConcreteFloorSolutions]

It cures to an inert solid mass and is thrown out if not used.

[@wolfgang6805]

Where can I find a arack attack?

[@ConcreteFloorSolutions]

It is a racatac, search online or Amazon has them too. There are multiple configurations.

[@yumac88]

Hey there, awesome videos! I've watched several of your videos now and I'm wondering why you would prime the garage floor before putting epoxy and other times you wouldn't? I plan on renting a diamond floor grinder and then using a kit but do I really need to prime?

[@ConcreteFloorSolutions]

We ALWAYS prime a floor. Some, most, other companies skip this step because it adds a day to installation. NEVER skip a primer.

[@upsideways]

Nice match! Can you use same rollers for primer and intermediate? Thanks!

[@ConcreteFloorSolutions]

Rollers are not reusable, you will need to throw them away after each coat. In the event you are applying the intermediate coat immediately after the primer, you can reuse the roller. Typically I try to instruct people to do one coat per day though, otherwise it gets tricky applying the intermediate coat on wet primer, you can actually squeegee the primer off of the surface if you push too hard on the squeegee

[@ronniejoejr.4748]

Nice and thanks for the video I want to do this as a side hustle.

[@ConcreteFloorSolutions]

concretefloorsolutions.com/store/ Look me up if you have any questions [e-mail]

[@joshuaallen6196]

what kind of roller nap?

[@jameshisself9324]

Thanks for the great video, I really get a sense of your method and how to apply this. I have a question: I have a lot of efflorescence on my garage floor, can your system handle that?

[@mhlabuhlangenemedia465]

Did you use a spiked roller here?

[@ConcreteFloorSolutions]

No i did not

[@DonaldskyQC]

how longue does an epoxy floor like that will last ? and can you doo epoxy on garage floor that do not have a vapor barrier under the slab ?

[@ConcreteFloorSolutions]

You should easily get 10 years minimum out of the floor before it starts looking worn out. It depends on how well you maintain it. Always clean abrasives off the floor so the tires don't grind it into the surface. I just posted a video this morning of this exact floor two years later and the floor next to it four years later. kzbin.info/www/bejne/pGOYmGdqrrGZgJo And no you do not need a vapor barrier. You need to make sure you apply the primer when the temperatures are dropping so the primer penetrates into the concrete.

[@profrogeriogomes5474]

what material are the flakes ? Tanks

[@laurentmercier6122]

Hey! Thks for the informative vidéo!! Instead of buffing the concrete, could I simply pressure wash it with a strong pressure washer like 4000psi? Thks!!

[@ConcreteFloorSolutions]

I always recommend a diamond grind with a scratch in the surface. It may work if you do extreme pressure washing, but you aren't getting the surface profile and may still have failure.

[@monicaloera1427]

wow you make this look so easy.

[@dianesanchez2739]

I noticed you didn't scrape off the excessive flakes? can you tell me more about that?

[@ConcreteFloorSolutions]

You only need to scrape the flake when you do a full broadcast. Some of the flakes will stick up vertically that you need to scrape off. When you do a random flake that is not so heavy they lay flat. The few random flakes that may stick up break off when you run the squeegee over it on the clear coat

[@five_leaf_clover]

What should be done in corners where flake has built up and is pushing thru the top coat? (I paid someone to install)

[@ConcreteFloorSolutions]

try a small hand scraper to knock off the peaks?

[@brandon4514]

If floors completely finished, may take 80, or 120grit sand paper and sand it down...then touch it up with clear urathane coat

[@vivianomorales5471]

Some one can tell me where can I buy this product please.__Thanks.

[@chenwu9788]

Can I just use roller without using squeegee to apply the three coats?

[@ConcreteFloorSolutions]

you can, but I wouldn't recommend it. You wont have a consistent coat of material and it will take much longer to apply.

[@jsud5559]

Awesome tutorial!!! You are so very knowledgeable and kind to share your expertise.

[@carlosmarin6171]

Nice job, do we need to grind a recently poured concrete slab?

[@ConcreteFloorSolutions]

Yes, you always need to diamond grind and create a scratch in the surface.

[@brandon4514]

Always need to grind, and wait a minimum of 30 days after concrete is poured. Let the moisture come out

[@jasonjuarezz]

What kind of grinder is that?

[@merlin3921]

So really great pro tips.

[@chiefthunderhorse]

I assume aluminum oxide is so floor is not so slippery ?( traction)

[@ConcreteFloorSolutions]

correct

[@stewartsmalls2024]

Does Aluminum Oxide create a roughage to the surface by chemically reacting like gelatin or does it add grit like a powdered paint (rhino) lining for a truckbed?

[@davidnull5590]

Over the last few days I've watched a number of your videos, they'll all informative and enjoyable to watch. Very minor Comments: I haven't seen any of your videos where you tell the viewers the purpose of the aluminum oxide, most people don't know what the scratchy part of sandpaper is made of. The rollers - I'm sure someone somewhere is going to try to reuse the same roller cover for all three coats, good luck with that. Also, how about telling the viewers what to do with the excess materials? Thanks again for the nice videos.

[@fwbcarl]

I have an concrete floor that was not correctly finished and is very rough. Instead of smoothing or floating those who built it packed the concrete with a 2X 6 and left it how it finished. How do I fix this? Grind it smooth, or is there something pourable that I can pour and spread to make it smooth? It will need just slightly less than a quarter inch depth to cover the roughness.

[@ConcreteFloorSolutions]

If you can get a grinder to spin on it, try that. I would take all of the wights off of it first so theres not so much down pressure on the heads.

[@lalorivas74]

Hello there, well done. I'm interested on doing my own garage and as it looks possibly do some for other family members. I'm in Texas and the temperature is very cold right now. Would that be a problem while installing? Also, what is the timeframe for delivery if I order from your company? Thank you in advance.

[@sheacook1507]

What grit do you use when you grind the floor initially before the primer?

[@ConcreteFloorSolutions]

Typically we run a 40 grit diamond.

[@leovanorden4243]

Great details and thank you. Any precautions or concerns with these materials in a humid area like South Florida? Summer would be too hot here, looks like a "winter" project.

[@ConcreteFloorSolutions]

You want to apply your prime coat in the afternoon / evening when the temperatures are dropping. If you do it in the morning, the heat will pull vapors out of the concrete and may create bubbles. Also, never work out of a bucket of epoxy, it will set much quicker in volume. Mix the epoxy and pour it on the floor to slow down the chemical reaction. The hotter it gets the quicker it sets.

[@chilerosestevesclubfc9801]

I like to buy material Where I can't get thank you

[@ConcreteFloorSolutions]

concretefloorsolutions.com/store/

[@antcaruso3465]

Great video! 👍🏻 Do you need to acid clean as well and hose down?

[@ConcreteFloorSolutions]

We NEVER use acid, that is why we diamond grind. There is NOTHING good about using acid. Dry diamond grind and apply your floor immediately after. Quicker and better.

[@antcaruso3465]

@@ConcreteFloorSolutions TY!

[@phittable]

Just watched your whole video! Thanks for posting! I see this is the first video I seen that is the fastest and easier way to do the garage. I a lot of people clean for one day and let it dry for another day. Seems like it took them at least 5 days or longer just to finish. My garage is a brand new garage about 2 month old from brand new home. Do I need to grind up the ground as well? What do you think about the DIY Rust Oleum product from Home Depot? Hope to hear from you soon! Thanks!

[@mattrothenberger2445]

I’ve been in this business a while, and you always need to grind concrete before applying epoxy or it will not be able to bond.

[@ConcreteFloorSolutions]

I just posted a video today on the big box store epoxy failure. I always recommend grinding because there may be laitance on the surface that can interfere with the bond. concretefloorsolutions.com/product/500-sq-ft-complete-epoxy-flake-floor-kit/

[@jeangonzalez5243]

How much would it cost to have a 40x25 garage done? Thank you

[@ConcreteFloorSolutions]

depends on location. most contractors charge $6.50 to $10.00 per sq.ft. to install it. You can buy it and install yourself for $2.00 per sq.ft. concretefloorsolutions.com/product/500-sq-ft-complete-epoxy-flake-floor-kit/

[@georgebarrera498]

Hey what kind of grinder are you using?

[@ConcreteFloorSolutions]

Hilti DG-150

[@stephaniegeddings8438]

@@ConcreteFloorSolutions That is a very expensive grinder for a one-time DIY project. What grinder would you recommend for a home owner like myself?

[@chiefthunderhorse]

Only one final coat?

[@ConcreteFloorSolutions]

10 mil clearcoat, the total thickness of the floor is over 30 mils.

[@diegolopez4021]

Where can I get the aluminum oxide and what brand?

[@ConcreteFloorSolutions]

concretefloorsolutions.com/product/aluminium-oxide/

[@dianebullock4778]

Where do you purchase the material?

[@ConcreteFloorSolutions]

concretefloorsolutions.com/online-store/

[@IesûsChristós-033]

Excellent job

[@arnedac9399]

Great work wish I could hire you.

[@dylanmartin373]

What brand of epoxys do you use? Thanks

[@ConcreteFloorSolutions]

We use our own brand we have manufactured for us. concretefloorsolutions.com/product-category/epoxy-floor-kits/

[@jcmtz0814]

Where can I buy this product?

[@ConcreteFloorSolutions]

concretefloorsolutions.com/online-store/

[@benborelhaiti1056]

Very great video , you did a nice job

[@latndrilsgt7021]

I wish I had the patience to get mine done. I’ve been living there for 6 years and still no pretty floor. 🤷🏽‍♂️

[@09ironman1]

Where are you located

[@ConcreteFloorSolutions]

Allentown Pennsylvania

[@09ironman1]

Very nice video you did a very good job I wish I could hire you

[@ConcreteFloorSolutions]

If you live in the tropics and are willing to pay travel, you never know.

[@anthonyhuskisson6867]

Great video! Looking forward to having a go myself. One question, how do you clean your squeegee after use?

[@ConcreteFloorSolutions]

Thank you, We use acetone after each use.

[@JonathanGorr]

Looks fantastic.

[@germanhernandez3718]

Thx I wanna do that to my garage.