How to Install Firmware on Xerox WorkCentre 7525/7530/7535/7545/7556/7830/7835 from USB Flash

[@chrispatriot]

Thank you for this video. I've used it over and over again to help my clients get their systems back up after a lightning storm or some other issue has taken down the Hard Drive or corrupted the data. As an office equipment dealer, I have some clients 20 hours away and this is exactly what they needed to feel comfortable in doing it themselves... :) I've subscribed.

[@ElectronicsComputers]

I'm happy to help and thank you for your support!

[@andinoag]

Thank You Man... i have the same issue with WC7845 and this procedure solve the problem. Congratulations!

[@ElectronicsComputers]

I'm so glad I could help you!

[@sahanhnisal7310]

Where did you get the frimware file

[@lexracquel7708]

I have a 7845 and can't get this to work. I keep getting Software Upgrade Error. Does the new drive need to be exFAT or NTSF? And there are several dlm files in the firmware package, do I used them all?

[@Games-ld3dk]

good tutorial 💯. is there any way to make xerox 6505 bypass ink chip and show allways full whether there is ink or no using nvm values or custum firmware or modify the original firmware values to do that?

[@ElectronicsComputers]

Yes, you can find chip resetters online, but I don't use them. Instead, we purchase replacement chips on AliExpress for just a few dollars and install them for our clients.

[@luisantoniohernandezcanete5052]

Hello lets me help with a Xerox Workcentre 5875, since I do not want to read the USB does not take in time and the probe with different USB and all the ports of the computer. Thank you

[@kamathxerox7271]

Thank you. It worked for me. Xerox 7835. INDIA. June 2022.🙏🙏🙏

[@ElectronicsComputers]

You're welcome!

[@kebab714]

A forced upgrade use it carefully. You did see your machine came up in NON-Customer mode?

[@pixelsprintpress8510]

How long does the Encryption/Decryption process last? Mine has been running for 30mins now. TIA

[@patmospixels9295]

Hello sir, thank you for your help, i however have a 7845 which is not dispaling on the interface, what should i do? Its just a blank screen. I also have a 7525 which had a 2 inscribed on the the side back by the motherboard.

[@бздэн]

Thanks man, firmware upgrade xerox wc 7220 successfully:)

[@ElectronicsComputers]

Nice work!

[@ericassarl6340]

Hi sir, i tried this method on my 7120 (its not damaged, but i cant access centrework web interface and i read that update my firm would fix the problem) and when i boot the printer nothing happen. Do i have to remove the hdd or something like that ?

[@ElectronicsComputers]

Firmware: www.support.xerox.com/support/workcentre-7120/file-download/enus.html?contentId=115715 Prepare a USB Flash Drive Ensure that the USB device to be used has sufficient free space to contain the files to be downloaded. Create a new folder in the USB Flash Drive and name it DWLD. Copy the software file(s) obtained in (unzip the file and extract the .bin file if required) into the DWLD folder. Start Upgrade 1.Power OFF the machine. 2.Insert the USB Flash Drive into the USB connector beneath the USB FAX port ( you can also try USP port on the control panel).The FAX Cable (if present) should remain plugged in during the SW upgrade. This enables the FAX software to be upgraded using this procedure. 3.Power ON the machine while pressing the Energy Saver button. Hold the button down until Download Mode appears. After a while, Transferring will be displayed on the UI and the S/W will start to download to the machine .If Transferring is not displayed after 3 minutes, there is a problem either with the USB Device or with the USB port. Make sure the Flash Drive is plugged in all the way. Repeat the procedure with a different USB device.

[@adelkaoud1761]

Thank you can you make vedio about the software for xerox 5755 and how to fix the white colour of its screen as a proplm ?

[@willnugent698]

Do you know where I can get a Firmware update for the Apeosport IV C3370?

[@muhammadishfaq8211]

Problem in Xerox 58xx. This machine takes around 5mints to ready for operation. Please tell me how it ready fast for operation.

[@juver-xp]

Hello I`m from Peru, this same operation also works for xerox 7220?

[@ElectronicsComputers]

NO!!! It's different: Manually Updating the Software Using a USB Flash Drive 1. Create a directory folder on your USB Flash Drive called UPGRADE. 2.Copy the software .dlm file to this directory. 3. Insert the USB Flash Drive into the USB host port of the printer. The software upgrade process begins (sometimes update starts only after you turn off and then on again). Manual PDF: download.support.xerox.com/pub/docs/WC7220_WC7225/userdocs/any-os/en_GB/wc7220_wc7225_mfp_sag_ck1.5_en-us.pdf Firmware: www.support.xerox.com/support/workcentre-7220-7225/file-download/enus.html?&contentId=132277

[@juver-xp]

2013Electronics&Computers .Thanks if I work with a 7220. Another question, the same procedure performed with a 7225 but it did not work.

[@ElectronicsComputers]

My guess you did something wrong, because these models WorkCentre 7525/7530/7535/7545/7556 have the same firmware and updating procedure.

[@HuzefaMSultan]

Hello, I am Huzefa Sultan from Kuwait. We have the Xerox phaser 7800 Printer and when we shutdown the printer and remove power cable its firmware corrupted. though i downloaded latest firmware, but how to upgrade firmware information was very tough to find on internet and xerox support as well. after watching your video and follow the steps my printer has back to the life again. I corrected this below three thing which i couldn't find else where. 1) Format flash drive as FAT32 2) Create folder altoot 3) cretae file name without .txt extention Forced_Upgrade Thanks a lots, KUDOS to you :)

[@ElectronicsComputers]

I'm glad I could help you. Xerox doesn't like to share service manuals or they give you some useless information. I understand they make very complex devises but it's not the point...

[@khampan1920]

u stated "altoot" please clarify whether it is a typo mistake or

[@microlabcomputerservicecen2749]

typing mistake "altboot" small letter in the root of USB flash drive.

[@filippomoro6301]

Thank you for your guide. I've a problem with my Xerox 7225. when i start the green screen appears "shutdown in progress" and after 20 seconds she does'n start and reboot initly. I tried to follow your guide but the pen drive flash two times and doesn't load the firmware updating. could you help me? Can I force the pen drive to load? Thank you in advance

[@sandraavila7988]

I need help, for workcentre 4260. in the screen said "Software upgrade in progress" and never start , never start the green screen.

[@prashantpande3303]

100 % useful video thnx it work on my 7556. please add more information videos on 7556 series xerox machine

[@nejismiri5823]

www.support.xerox.com/support/workcentre-7545-7556/file-download/enus.html%3FcontentId%3D122721.

[@madnan9659]

Good

[@MustakAnsari-fz5jg]

Mari machine band he thik karani he cot.no.do

[@econotintas]

Thank you very much my friend, from México!!!

[@ElectronicsComputers]

You're welcome colleague!

[@ishwarsahu8049]

Sir mere machine ka MCU board kharab ho gaya hai to mai MCU board change karne ke sath MD board bhi change karne ki jarurat hai kya wc 7545 me

[@joaoac8808]

Can you tell me what the procedure is for 3615?

[@MohamedYaseen1]

If I have to replace the old hdd with a new one, is it the same process?

[@ElectronicsComputers]

Absolutely the same process!

[@MohamedYaseen1]

@@ElectronicsComputers i did it and upgrade was success but there is a problem in calibration. It prints only 'Before' Page and Instead of "after calibration' its printing 2 error pages with red colored text. saying ERROR: Undefined, Offending command: nan.. Blah Blah.

[@ElectronicsComputers]

Can you go to service menu and see what kind of problems is has? @@MohamedYaseen1

[@MohamedYaseen1]

@@ElectronicsComputers in fault history it shows description as " RC sample Block Fail -B #4.in"

[@geetakathare4952]

Thank you for the video. If screen is turning gray after showing first page display and I can take print from PC through network means OS is loaded but no display. Is there any option if screen showing gray display the options can I see or change through PC/system?

[@ElectronicsComputers]

During booting or restart process does it show any information? I mean it does what have to or still gray too.

[@michaeltaylor6255]

Can you tell me the process for upgrading the firmware on a xerox versalink c405, as there is only a bin firmware file on xerox's drivers download

[@ElectronicsComputers]

Here's an official manual on how to do that: download.support.xerox.com/pub/docs/VLB70XX/userdocs/any-os/ar/Versalink_Firmware_Installation_v5.pdf

[@arturofernandez1432]

hello, im from mexico, upgrade the firmware solve the problem .system error.power off then on and notify system administration? , ty

[@muhammadishfaq8211]

call me

[@muhammadishfaq8211]

923085747865

[@hamzashaikh3319]

I have an issue with 5755 i tried a lot for new firmware instalation but it shows red and green screen again agaib

[@thepnimit...7043]

Thank you 😊💞 for Video sir...

[@ElectronicsComputers]

Most welcome 😊

[@adriftbubbles6817]

hi, any clue how i could do altboot on a Xerox Workcentre 6605? :( the FW file is .exe so i'm stuck...

[@nikhilmaikhuri4772]

Not able to print or copy from tray 3 & tray 4 of xerox 7545 if command is given job gets deleted automatically by itself. system upgrade is also done but problem till exist. kindly help me...

[@timothyokekearu6587]

please can you help with installing or updating Firmware on Xerox Workcentre 7120

[@rahman-nb4dm]

HIII My bypass tray 5 page feed not detecting what will be the problem. can you thought so

[@black_baron_net]

0:50 Has anyone tried to install an SSD drive instead of a HDD drive? Does it work? It's a SATA connector right? It could speed up the machine.

[@ElectronicsComputers]

Sure! We've upgraded a bunch of Xerox machines to SSD drives. You can either clone the drive to a new SSD or reinstall the firmware.

[@black_baron_net]

@@ElectronicsComputers I've tested the internal HDD drive with many print jobs being sent to the printer. It took quite a while for the printer to process the print job queue. An SSD could speed up the entire process.

[@black_baron_net]

@@ElectronicsComputers The SSD will be formatted automatically by the printer as far as I have read somewhere on a forum. What about the HTTPS certificate. Will this be installed automatically or how does it work?

[@miramarkhaled8806]

i have xerox 5755 workcentre energy saver mode is not working is there any chance that it will be fixed by installing firmware ?

[@ElectronicsComputers]

I'd recommend first to check settings or reset to the default state. If that function worked and then stopped working it's enough to fix it. But if you've experienced that problem from the beginning the you have to install a new updated firmware.

[@djameldjamel7576]

Hello I had this error :print engine failure What should I do ? Thank you in advance.

[@manojsarkar9203]

Thank for help. I try to update the software by ur process but i not taking update. my machine is 110v

[@philippeannet]

Do you know whether forced altboot systematically resets the admin password ?? I've got a 7830 I bought years ago on Ebay, I changed the password and cant't recall what I set (well, I thought to recall, but all passwords I can remember of don't work). I contacted Xerox, who said the account for the serial was 'on hold' and that they can't help (i.e. for the 12-digit reset code), so I'm on my own. I recall having had an issue with the SD card on the motherboard, which I had to replace (someone kindly helped by sending an image file for that), I don't know whether this SD card issue could somehow be linked to the admin password getting lost ??? Anyway, I'm not interested in the counters, so if altboot does the job, fine by me !

[@ElectronicsComputers]

Have you tried to log in with the default user: admin and password: 1111 For most Xerox models Altboot solves the problem. If doesn't work, then you need to use Xerox password reset tool. That app generates a 12-digit code using your device serial number and the amount of total page count. First try the alboot, if you are still unable to resolve the issue, give me the data for the reset and I'll try to help you.

[@philippeannet]

I know all that… and as I stated, this was a 2nd hand device bought on EBay. Xerox refused to provide ANY support, so no 12-digit feature code, and as stated, I tried all known and default passwords with no luck. What about forced altboot and admin password ?

[@carinarosas8449]

Same process for xerox 7755?

[@ElectronicsComputers]

Yes, the same.

[@carinarosas8449]

@@ElectronicsComputers I tried, with three different USBs, but it seems that the printer does not detect the USB. No light is on. It has three different ports and non seems to be working.

[@nazmulnazmul4818]

Your video really helpful. I have a problem in my Xerox 7255 suddenly ethernet not working, on the router connected cable port orange colour light, not green, just suddenly it's happened. Before was fine. Please could you advise me kindly

[@ElectronicsComputers]

It could be anything, wrong IP/DNS/mask/gateway settings on your printer or something happened to your local network so check it first. Simply connect a laptop or something to that cable and check if it's OK. If it still doesn't work try to hard reset your printer and your last option is to remove backup battery from NVM module. That module looks like a laptop's RAM module with yellow battery on it. Simply remove that module and disconnect the battery for a minute.

[@Alexsci7]

Hi, Does this also work for Xerox 7800?

[@guidelinetanda3857]

when i comand print from usb . then popup msge show "job daleted" i have wc 5890 .

[@ElectronicsComputers]

Never had that problem but if that happened to me I would reset the device to default settings.

[@ElectronicsComputers]

Here's video how to get into diagnostic mode and there you'll find the option for resetting your device: kzbin.info/www/bejne/a6CZlKKnrM2Na5Y

[@madhakaa]

were can i get the firmware also mine is not going into energy saving mode it says a condition prevents it from enterring energy saver mode how do i fix this

[@microlabcomputerservicecen2749]

Reset WC by entering in admin mode.

[@MuhammedBello-e3q]

Good morning sir I have WC 7830 it also stuck on green screen but never boot I try to follow the same procedure but is not working like how can I ho about it sir

[@issamzarour8969]

i have one question it's good for xerox 7120wrork centre? thanks

[@ElectronicsComputers]

the same process

[@intrawerxinc8020]

Do you know if same procedure works for workcentre 7435? thanks.

[@ElectronicsComputers]

This method works only for machines starting from 7525 models.

[@intrawerxinc8020]

Thank you for your reply!

[@yoshynkamei4426]

How about I have a high link c8055 that when I turn it on it starts as the screen of your video then restarts and starts again as if I just turned it on could you help me solve this issue, and tell me if it is also caused by the lack of Firmware update, receive a warm greeting and thanks in advance

[@ElectronicsComputers]

Sounds like a corrupted firmware or hard drive. First I would check the drive and then reinstall firmware.

[@JackSparrow-Santucco]

There is the problem with startup in WorkCentre 7830. Long time. And after 10-12 minute alert message RESTART PRINTER is appear. Or if loaded, freezing or working 5 minute and after restarting. I think need to replace HDD (may be it is incorrect?). Month ago updated firmware-cos were same problem. After working perfectly during month-again this problems. Can we format HDD before installing or during firmware installation system will self formatting?

[@ElectronicsComputers]

Looks like an HDD related problem. There's a regular 2.5'' laptop's drive. Try to connect it to a desktop PC and check its SMART. If that drive is almost failed formatting is not gonna help you. Just replace it with a new one 160Gb-500Gb

[@JackSparrow-Santucco]

2013Electronics&Computers if I will replace hdd, must I formatting it before in pc or it doesnt mare replace it formatted hdd or not?

[@black_baron_net]

☠️BLACK BARON☠️ I made "Reset All Settings" by logging in on the xerox machine. It worked for one day. I tested ON/OFF for one entire day. It worked. After one day I have this double startup 0:20 again. What is this? Does IT Software not hold longer than one day?

[@roswellxp]

Hellow dejar friend, I have a wc7775 but the battery of nvm its fail, now My Machine cames wc7755 and the scaner its no longer aviable, some people tell me i have the remplace the firmware and tell me its necesary another software to chargue the firmware to the usb drive This proces you show it works for the wc7775? Thanks

[@ElectronicsComputers]

Yes, I'd recommend to start with the firmware. It should work. Same process as I showed in this video.

[@naveensood5725]

Sir. Iam from India. When I load firmware and it reaches data encryption it doesn't go ahead. I waited for an hour. I have installed new hard disk and got the nvm battery checked as well. Thanks. It is 7545

[@isaacangulo3018]

Hello, I know it is a very old video but I am very sad, my wc7545 printer does not start the green screen, it only keeps turning on and off in black and white, just like what happens to your printer before turning green( all ligts turn on and off same with you frist)

[@ElectronicsComputers]

Try installing the RAM module into another slot. If you have two RAM modules, then try them one by one in all slots. Maybe one of them is faulty. Check the hard drive as well. Additionally, try unplugging the flash module (a small board with a big yellow component (battery) on it) and turn it on without it to see if the machine's behavior changes. Lots of things could go wrong, so it's hard to pinpoint exactly where the problem lies.

[@black_baron_net]

☠️BLACK BARON☠️ I left the printer untouched for 6 weeks. I came back and had the same startup/boot problem. I have no idea what happened. The software verification test via the web interface worked. Now it fails. Is the system secure and safe. That's the question. I disconnected the printer from the power supply, I waited ten seconds and reconnected the power supply. The printer only shows sometimes this strange startup procedure.

[@javiertulardiano628]

Hello 2013Electronics&Computers , thank you very much for your help. I'm going to subscribe. a query, install the sd of a xerox 7800 and my photocopier does not start. the screen remains fixed.

[@naulylda6859]

Eu tenho duas Xerox 9301 e a Xerox Colorqube 9203. Como posso atualizar

[@abdulkellsesay8286]

How can i get the upgrade software for Xerox 7830

[@musicfactory9336]

Xexor 5755 blank pages printing problem...any solution

[@RaySamboy]

Does this also work for Xerox 7800?

[@ElectronicsComputers]

Absolutely the same process

[@black_baron_net]

For some reason some icons and text will NOT be printed on paper even though the graphic elements do appear correctly in Adobe Photoshop. What’s wrong in IT software with the latest Xerox printer driver for OS X when making a print out of Adobe Photoshop?! Developers c’mooooon!

[@globalonline9756]

Sir I also did send but showing Phase not installed what to do sir

[@mr.hi-tech786]

sir xerox 5855 me legal size paper portrate me line ptinting me a rehy plz help

[@govindshakya9888]

i have 7556. All 4 tray not lifting paper bypass also. please help

[@sergey_84_]

Спасибо за такое подробное видео.

[@TuanNguyen-el6tm]

Xerox 7845's software has been deleted, the LCD screen shows the name of the device, then indicates xxx xxx. I need help. thank you

[@ElectronicsComputers]

First, check your HDD/SSD and simply reinstall your machine's firmware. It's absolutely the same process as I was showing in this video.

[@lenawilloughby8827]

Thank you for this video. When I get to the data encryption part, it never finishes fully, even after several hours. Can you tell me what next steps I might take? Thank you in advance. Xerox 7525

[@ElectronicsComputers]

Maybe your hard drive is corrupted. Check your hard drive for bad blocks or simply try another one.

[@lenawilloughby8827]

2013Electronics&Computers Do you think that this is more likely than the battery?

[@lenawilloughby8827]

@@ElectronicsComputers Can you tell me about how long the data encryption part should take? Roughly speaking?

[@ElectronicsComputers]

@@lenawilloughby8827 the whole process takes no more than 30-20 minutes depends on the hard drive. If it's SSD then way faster.

[@ElectronicsComputers]

If you're 100% sure that your hard drive is in perfect condition then try to remove NVM module and then the battery for a 10 seconds. Finally put everything back together and try to install firmware.

[@ruwanperera6471]

Can You Tell Me How to Install Firmware on Xerox 7120

[@ElectronicsComputers]

are you sure that the same method doesn't work? www.support.xerox.com/support/workcentre-7120/file-download/enca.html?operatingSystem=winxp&contentId=116705

[@ElectronicsComputers]

To update the software: 1.In CentreWare IS, click Properties > Services > Machine Software > Upgrades. 2.Under Upgrades select Enabled. 3.Click Apply. 4.Refresh you browser and navigate to Properties > Services > Machine Software > Manual Upgrade. 5.Under Manual Upgrade, click Browse to locate and select the software upgrade file in .bin format. 6.Click Open. 7.Click Install Software. The file is sent to the printer. Once the software is installed, the printer restarts. 8.Check the configuration report to verify that the software has updated.

[@sahanhnisal7310]

Hi can you give me the USB altboot update Firmware file. for the the Xerox 7845 ( i can't find usb updte file official site. It only have web base install file)

[@ElectronicsComputers]

it's available on the official website at the end of the list here: www.support.xerox.com/en-us/product/workcentre-7800-series/downloads?platform=win10x64&language=en

[@tcfdod2007]

have a 3220, can this same procedure be used to fix a corrupted firmware?

[@ElectronicsComputers]

No, Firmware for Xerox 3220 updates simply by USB cable www.support.xerox.com/support/workcentre-3210-3220/file-download/enus.html?contentId=101848

[@tcfdod2007]

2013Electronics&Computers firmware got corrupted and wont recognise usb.. Any ideas how to reload firmware?

[@ElectronicsComputers]

Try to boot into download mode: Turn on your device while holding the button “STOP”, when you see message - “Download mode. Press Stop Key” and then Press the “Stop”. Then message shows up “Wait Image” and then try to run firmware update.

[@tcfdod2007]

2013Electronics&Computers thank you for replying..I tried that..it dose not recognise the usb connection. I sent it out for repair..hopefully it will get repaired. If not I will sell it for parts.

[@armandotec]

Olá eu sou do Brasil, esta mesma operação também funciona para xerox 5755

[@ElectronicsComputers]

That's right!

[@ranahasnainmanj8832]

Hi Bro Please Tell Me About Web Money (mention in your description).

[@ميكالباسل]

thank you very much that was very benefit :)

[@ElectronicsComputers]

You're welcome! I'm glad I could help you.

[@lisalisa5363]

Hello, I have a Xerox 7556, he opened the prompt need to enter the activation code, can you tell me the solution? Thank you

[@ElectronicsComputers]

Hi! Maybe you have the WRONG supplies in your machine!? What changes were made to the machine (supplies, settings etc)? Or it suddenly started asking for the activation code?

[@lisalisa5363]

@@ElectronicsComputers Can you send me a mailbox, I send you a picture to see! Thank you

[@lisalisa5363]

@@ElectronicsComputers Hello, I emailed you, free you to help me see, thank you very much

[@foscone87]

@@ElectronicsComputers I have the same problem, The printer suddenly starts asking for the activation code. How can I solve this?

[@1273rp]

I Have also same problem of this..... Activation Code Need in my xerox 7535 machine.... how to solve this problem ?

[@mr.hi-tech786]

AoA Sir Xerox 5855 wc is incompatible fuser module R3 error please Sir help me what can I do?

[@microlabcomputerservicecen2749]

Check you are using proper fuser module as per WC or Check fuser chip number as per wc + fuser module .

[@miguelgaroto4439]

Please wait ... the system is calling Do not press the switch again while the device is being switched off tried more did not work. As soon as you turn it on, the error appears on the screen. Do not read pendrive or recognize anything else just comes the error ....

[@thavhamadzaga4200]

Does this work for WC7428?

[@miguelgaroto4439]

error Please wait ... the system is calling Do not press the switch again while the device is being switched off. want to update the firmware on my Xerox 6655 printer will it improve? can you help

[@ElectronicsComputers]

You can reset the NVM settings on the Xerox, erasing all settings and restoring the machine to the original factory defaults. (“NVM” stands for Non-Volatile Memory. In a Xerox machine, the non-volatile memory is where the settings are stored. NVM enables the machine to save settings when the power is turned off.) 1. Press and hold the “0“ button on the keypad, and while holding "0" press the “Start” button. The Access Number prompt opens on the LCD touchscreen display. 2. Type the access code 6789 into the prompt using the keypad. The Maintenance Mode screen displays on the touchscreen display. 3.Touch the “Initialize NVM” option on the touchscreen display. 4. Power down the Xerox machine and leave the machine off for 10 minutes. The NVM is reset and the original factory default settings are initialized.

[@miguelgaroto4439]

I tried more did not work. As soon as you turn it on, the error appears on the screen. Do not read pendrive or recognize anything else just comes the error ....

[@ElectronicsComputers]

Then try to reinstall firmware via USB. There's official firmware available on Xerox website. Create alt boot drive like on this video.

[@lisalisa5363]

Hello, how can I contact you? Can you tell me that I have a Xerox 7556 there is a problem, can you look at it for me，

[@djameldjamel7576]

The Xerox I have is 5658 version

[@llynellyn]

Will this erase the settings and return them to default? I.E if you have forgotten the admin password and need it back to 1111 lol.

[@llynellyn]

IT WORKS! YOU'RE MY HERO!

[@ElectronicsComputers]

Sorry for the late reply. Yes, it will completely erase all your data and settings. I'm happy to help!

[@nuriapalacios1408]

Hola ! Buenas tardes tengo una Xerox 7525 que me tira el error de no tener lector de tarjetas

[@ZiiN20]

Thanks man, You are a hero.

[@ElectronicsComputers]

Glad to help

[@csenterprisesenterprises6870]

i need get the FORCED_UPGRADE FILE PLS SENS INSTRUCTION

[@manojsarkar9203]

always show fuser error. when i unplug and plug it again it working. i am tried of this the is no problem. fuser unit is ok but still i do the giving problem can u give the solutions.

[@ElectronicsComputers]

It's hard to give you some advice with that information. Try to clean contacts on fuser, update firmware or perform hard reset. Check all errors through the service menu, there might be information about failed part, sensor etc

[@arindammandal-2466]

my 7435 cannot boot.. after power up it loading upto 3 of 6... then the machine not responding.. please help

[@ElectronicsComputers]

check the hard drive maybe it has some bad blocks. if it's OK try to reinstall firmware.

[@sandeepjain9177]

hi this is sandeep. I also have Xerox 7535 Some time ago, the nvm battery damaged the machine by 7525. How can i go back to 7535? any buddy help

[@devicomputers1380]

sir i am satish kumar gulbarga karnataka i also got same problem xerox 7535 but machine showing 7525 plse suggest me

[@rituborgohain734]

@@devicomputers1380how can your solve problem. my machine same problem xerox 7535 but machine showing 7525 plse suggest me

[@kylesershon4739]

Way to go! Thank you!

[@ElectronicsComputers]

Happy to help!

[@junaidaslam5155]

@@ElectronicsComputers meri 5735 machine hy per altboot nahi ho rahi

[@globalonline9756]

Sir plz can u give me the link of 5755 work centre 's Firmware upgrade link.

[@ElectronicsComputers]

www.support.xerox.com/support/workcentre-5735-5740-5745-5755/file-download/enus.html?contentId=122838

[@globalonline9756]

2013Electronics&Computers Thanks you sir I downloaded this software but when I put the USB into machine its not going to upgrade

[@ElectronicsComputers]

a. On the root of the USB should be a folder called altboot b. Then inside of that folder should be the following: DISABLE_DATA_BACKUP FORCED_UPGRADE WorkCentre_5735-5790_system-sw#061.132.228.10101#.DLM c. Power off the printer, plug in USB, Power on printer. Follow instructions. USB should be FAT32 (Not NTFS). Create the 2 files with Windows notepad and save with no file extension. Grab the Software file from Xerox.com and just extract the bin file , don't use the zip

[@globalonline9756]

2013Electronics&Computers ok sir let c I'll try this type thank you

[@ElectronicsComputers]

You're welcome! You can also try to google for FORCED_UPGRADE Xerox wc 5755. Most of people don't want to share this information.

[@hichambayed8210]

thanks works for me

[@ElectronicsComputers]

You're welcome!

[@umermirza6231]

Can i upgrade xerox 5845 firmware with this method?

[@ElectronicsComputers]

Absolutely the same process!

[@csenterprisesenterprises6870]

i need get the FORCED_UPGRADE FILE PLS SEND INSTRUCTION

[@ElectronicsComputers]

Use the links in the description box below the video. The website with ads will redirect you to my cloud, just follow its instructions (you'll need to watch commercial video). It's totally FREE!

[@tcfdod2007]

Oh a very helpful video BTW.

[@ElectronicsComputers]

Thank you!

[@avadheshkumar3874]

thanks for information

[@ElectronicsComputers]

Welcome

[@fredinhodossantos3629]

que tal buen dia, cuanto tarda la encriptacion?

[@ElectronicsComputers]

about 10 minutes

[@vinhduoc5288]

I asked for a complete Fuji Xerox DC IV 3065 firmware

[@ranaaslam4909]

Sir how fix install phase incomplete eror in zerox 5755 Thanks

[@flypubg]

у меня такая же проблема, пока решения не нашел, висит на зеленом экране приветствия xerox, и все.

[@ckdesign9773]

MY XEROX 7556, INSTALL 7525, CAN'T PRINT. PLEASE COMMENT YOUR SOLUTION.

[@ElectronicsComputers]

If you installed on your Xerox7556 firmware from Xerox 7525 then it's not gonna work. Reflash your machine with a proper firmware.

[@ckdesign9773]

@@ElectronicsComputers please, give me a link download.

[@ElectronicsComputers]

@@ckdesign9773 www.support.xerox.com/support/workcentre-7545-7556/file-download/enus.html?operatingSystem=macosx&fileLanguage=en&&associatedProduct=XRIP_WC7525_base&contentId=139776&from=downloads&viewArchived=false

[@RAYUMZZ]

Turn off the configuration report?

[@xfortech6225]

my Xerox WorkCentre 7535 error lose machine ID speed I need nvm file 7535

[@nejismiri5823]

www.support.xerox.com/support/workcentre-7545-7556/file-download/enus.html%3FcontentId%3D122721

[@RAYUMZZ]

I asked for a complete xerox 7556 firmware.

[@ElectronicsComputers]

www.support.xerox.com/support/workcentre-7545-7556/file-download/enus.html%3FcontentId%3D122721

[@pawankumarchoudhary9335]

xerox 7556 supplies activation code. REQUARMENT PLZ HELP

[@zeeshanpir4199]

Dear sir i have forgotten my xerox workcentre 7220 multicolor password and now i want to reset my admin password so i have forgotten it would you help me to solve my problem please,thanks

[@ElectronicsComputers]

Just reinstall its OS. Simply repeat all the steps from the video.

[@hareeshjallepalli7463]

Thank you very much sir