I had to use a cutting wheel on my grinder to expose the bar to attach the VISE GRIPS...but thanks for the help! FIrst one took an hour because i figured out I had to remove the air filter housing to get to the top nut...but the 2nd one took 10 mins, not counting taking off and putting the tire back on...BOOM!
@FirstOneGame9 жыл бұрын
I wish you would post more your the best jeep KZbin ive have found you have saved me more times than you can imagine on my xj
@zakarius838 жыл бұрын
Awesome vid thanks for the info. Was wondering why you didn't undo the top bolt first, wouldn't the bottom bolts keep everything else in place so you wouldn't have to cut away the shielding?
@Lego_SML3 жыл бұрын
if you have stock shocks on it you can use a c clamp to put around the top shock to hold it in place
@sparta119 жыл бұрын
vice grips
@pmanor18 жыл бұрын
Hey thanks for taking the time.. it helped out.
@devonblaine9 жыл бұрын
Thanks for the video. A wind sock would have been nice.
@toddlove45009 жыл бұрын
Vice grips
@timmyjumbo42626 жыл бұрын
And he should use a wrench
@mich7.3stroker248 жыл бұрын
just found out my shock blew!!! this is gonna help a lot rather then take it to the shop for 250$ thank you
@tobytollefsen88027 жыл бұрын
Thank you for all the info. You make it look EZ.
@kowalski3633 жыл бұрын
Great video
@alanv3565 жыл бұрын
Very explicative and good video congs.!!!
@rickscott49757 жыл бұрын
Those are not channel locks, they are vise grips. It's not the most intelligent thing to use a crescent wrench on really tight nuts. Also the nuts on the bottom should be held with a 13mm wrench, or a socket with a breaker bar. The proper tools will save rounding off bolts and nuts , which cause more serious troubles.
@jsgktr9 жыл бұрын
Did you not need to take the grommet from the underside of the top of the shock and put it on the new one?
@fatboy198316 жыл бұрын
Thank you. Good information.
@rickjames68174 жыл бұрын
Nice thank you this helped me a ton !
@iamboyto7 жыл бұрын
2:00 you werent doing shit with that ratchet lo
@fernandoboss17404 жыл бұрын
Channel locks? You mean vise grips
@3ricky134 жыл бұрын
tops 15mm , bottom 13mm
@darkday44058 жыл бұрын
than you
@bobbybarraza84887 жыл бұрын
Vise grips
@letsbuilda4ort7 жыл бұрын
sorry, i was commenting on the advertisement. my bad. woops.