How to install front suspension on a minibike

Hopefully this video helped you out, installing the shocks looks a little complex but its pretty simple.
Link to the suspension kit www.gopowerspo...

[@yaballa85]

Man I was gonna say great job with you vid bit everyone else already did ! Thanks for making it easy and fast for us to learn good stuff dude

[@MiniBikesMedellin]

Last week i did the same front suspensión from junk, im proud of it xD😅 i used the bars from a scooter.

[@NATHAN_SIMPSON]

Best video ever!! Very detailed, thank you! This helps a lot!!

[@JT-zn5mg]

thanks man, like the scooter clips!!

[@nathanmciver6496]

Awesome video! I like how you didn't have the bearing welded! Now I have to think of a way to have a spacer in the middle or welded somthing to hold the bearing at the right height

[@JT-zn5mg]

thanks man, yeah welding to something like that is sketch

[@Barller]

make more that was quick simple an the right way dont stop uploading you are helping aot of people

[@JT-zn5mg]

thanks, I appreciate it

[@josephgames5755]

what is the height of your handle bars?

[@heathenprojects2639]

I'm going to do this to some of my classics bikes

[@JT-zn5mg]

nice man

[@EdwinIzaguirre-pb8qt]

Put a 224cc predator but when I accelerate full speed that shit shakes so bad but I realized my bar is bent like it looks funny and I was thinking of buying this so it won’t shake no more

[@joseguzman4277]

I have the same frame dude but mine doesn’t have ball bearings where u get those??

[@JT-zn5mg]

Where the handle bars go??

[@LIFTLEGIONCOM]

Is it a big deal if the riser plate is upside down? I just watched your vid and said “damn.. I think I put it upside down.” lol

[@jatmanjat1441]

Is it possible to put this on a Coleman

[@JT-zn5mg]

well the coleman ct200u is a taller bike with bigger wheels, so I don't think so

[@RidingwithJayx]

You can in the Coleman ct100u

[@billchaires6743]

Will it fit the 5/14 inch cc100x

[@gustavogarcia1244]

Will this fit on my realtree rt100 ?

[@sheba6779]

Hi Great video 👍🏼 . What size tires are you running on your mini bike thank you.

[@JT-zn5mg]

these are just the stock ones that come with the doodle bug

[@jamesa6272]

So will it fit a Baja mb165?

[@jacksontraynor4498]

I got a coleman ct100u frame, will it work? Also very good video

[@JT-zn5mg]

Yeah it should be compatible

[@prisonbreak1166]

​@@JT-zn5mgwould it be an obvious height difference? I'm trying to do this to a 100ccX but i fear the forks will be to short

[@Blessedup69]

Great video!!! How do you like it? Is it more comfortable especially going over bumps?

[@JT-zn5mg]

personally I'm a simple guy so having just the front shocks is fine for me and you can always modify rear shocks or have a welding shop do it for you, also if you want to go over bumps easier then just let out some air in the rear tire, but to answer your question yeah I love this bike

[@faroutgolf3650]

You should have been a school teacher but you wound up here.....

[@Gamerguy25000]

Do you have to buy the handlebars and parts separately?

[@JT-zn5mg]

the handle bars I have don't come with it but they have handlebars that come with it in the bundle

[@thomasarsomavitch6363]

@@JT-zn5mgdoes the hardware to attach it come with it

[@JT-zn5mg]

@@thomasarsomavitch6363 you have to buy the handle bar hardware separate from the suspension but they sell a bundle where it comes with the suspension, handle bar hardware, and handle bars

[@sushuki4833]

How much u want for the gt bars in the thumbnail I’ll pay 400 shipped I want them for my 87 pro series

[@morpfrank4709]

How high of a rise are your handlebar I'm doing the same setup on a Baja motorsports bike

[@JT-zn5mg]

im not sure, these are from the 80s off a old dirt scooter

[@israelalcantar8765]

What's size are the bearing that are inside of the bolt you put inside to hold the fork?

[@JT-zn5mg]

are you talking about the two rounded ball bearings that center the bolt?

[@israelalcantar8765]

@@JT-zn5mg yes

[@JT-zn5mg]

@@israelalcantar8765 here's the link www.gopowersports.com/5-8-id-sealed-bearing-1-3-8-od-common/

[@brysonharris3911]

Is that the coleman ct100u or 200u?

[@JT-zn5mg]

its a baja doodle db 30

[@fatbuddycat]

My suspension just came in for my Db30s, better than stock?

[@JT-zn5mg]

I mean I think its better, but it all comes down to personal preference

[@fatbuddycat]

@@JT-zn5mg it changed the feel of the bike completely. Once used to it though, it provides enough confidence to really go go go!

[@fatbuddycat]

@@JT-zn5mg kzbin.info/www/bejne/rmi2k3iFp9mNbM0 here is how came out.

[@xxtrillionpromotions7734]

i gotta cc100x coleman is that the same or can i do that

[@JT-zn5mg]

yeah it should work

[@minibikebuilds3368]

mine didn’t come wit clamps wtf

[@caliboysemien2133]

Where did you get your handle bar clamps/risers?

[@JT-zn5mg]

They come with the gopowersports kit

[@spencerwoods1023]

@@JT-zn5mg mine didn’t come with them

[@elijah518elijah8]

Can you send me the description for

[@JT-zn5mg]

www.gopowersports.com/minibike-suspension-kit-complete-front-fork-assembly-universal/ here's the link to the suspension kit

[@janynz0negonzalesvargas144]

Any links to get them ?

[@JT-zn5mg]

you can check www.amazon.com/ , www.massimomotor.com/MB-200

[@andrewlahera6196]

Do you have a link to these?

[@JT-zn5mg]

to the parts, or the bike?

[@andrewlahera6196]

@@JT-zn5mg to the parts!

[@kirbylee57]

its a lot faster to turn this off and get after it.