How to Install Fuel Filter 11-16 Ford F250 Diesel

[@1AAuto]

√ *Watch the Video* √ *Buy The Part at 1A Auto* 1aau.to/m/Visit-1AAuto √ *Do it Yourself* √ *Save Money*

[@chrismechanic6164]

Best video I've seen on this filter change I've seen so far.

[@ReformedByFire]

I’ve watched others say prime the system by turning the key 6 times for 30 sec each. You’re the first that mentioned 3x.

[@oldguyriders]

Excellent instructional video. The best on KZbin for the 2015 power stroke. Particularly like the clarity in the sequence for changing the frame filter which is : loosen the filter housing 3 turns then and only then drain the fuel with the peacock. Another you tube video showed the sequence out of order which essentially results in draining the entire fuel tank if you happen to loosen the peacock first.

[@1AAuto]

+Joseph Warren Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c

[@pixelupdates7041]

Excellent video! I like how he explains the why's. For example, why the primary filter is turned three times before it's drained.... To prevent a siphon from the fuel tank.

[@pixelupdates7041]

The 2016 has a bracket on the primary filter area that needs to be taken off first.

[@timhollingsworth4852]

This video is awesome!! They tell you all you need to know. I will definitely be watching more of their videos. Thanks guys!!

[@johnhalchishick7094]

Great tip mine was draining the fuel tank three gals and was still going

[@papione1984]

If it doesn't start when it was running fine before the filter change you have air trapped in the filters. You can pull the "out" side (left) of the fuel line at the top filter. Turn the key to run position but do not start. The fuel pump will push the fuel through the filters and eventually you will have a full stream of fuel. You can use a hose to let the fuel through the line and drain into a bucket. Once you have full flow reconnect the secondary fuel filter line. The vehicle should crank and run.

[@1AAuto]

+Dennis Rimes Thanks for the feedback!

[@SKANK_HUNT49]

Sorry to trouble you sir, The one under the hood? Also is it the one with the green clip?

[@armandoperezjr]

Great video tutorial. In fact I went ahead and purchased the filters from the link provided. Keep up the good work 1A Auto.

[@1AAuto]

+Armando Perez Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c

[@KennethD8557]

Video was extremely helpful.... Thanks!

[@iamnumber5ps3]

Great video but make sure you get the housing around the filter tight enough, i tried to tighten to the point he said in the video but it needed to be a full turn tighter to stop air from entering the fuel pump and start the engine.

[@1AAuto]

+Spencer Hulen Thank you for your feedback!

[@williamcarter6374]

It’s also recommended to count the number of turns it takes to remove the housing for reference when reinstalling

[@toddharbaugh]

You risk vapor lock by not purging the air out of the system.

[@USMCdad470]

Changed my fuel filters on my 2016 Super Duty. Now having problems with it. Ran for one day then quit. About to change the lower pump and see what happens. No fuel getting to the upper filter. When we purged the line, very little fuel comes out. Lots of air.

[@cast_da_legend1361]

Can I change on a full tank of diesel

[@richbray748]

Yes. Just remember to loosen frame rail filter no 3 turns and then drain from petcock.

[@cavementech]

Strange question but where do you get those nitrile gloves?

[@cmoreau1000]

Excellent video, perfect instructions

[@1AAuto]

+cmoreau1000 Thanks for checking us out. 1AAuto.com

[@abelvaleriano7785]

Thanks y’all.....👍👍👍

[@1AAuto]

+Abel Valeriano Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c

[@juanarcos964]

That was great video amigo

[@kevinjibba]

When doing the upper fuel filter I put a rag under the fuel lines to catch fuel that leaks out from disconnecting the 2 fuel lines. Ok video just did mine before I saw this

[@johnmartin2172]

Yes, all other videos all say cycle key for 30 seconds 6X. Lose the music, too loud and annoying and just not needed.