HOW TO INSTALL LONGTUBE HEADERS ON A 5.7 HEMI(in depth video)

[@shaquan9893]

4 year old video, and it still holds up. Man, thank you for this.

[@IsThatGeneral]

@@shaquan9893 thank you. I’m glad the video is helpful.

[@elvargi4550]

This video is so much better than the channels KZbin tries to force me to watch! Great vid man this is super helpful.

[@IsThatGeneral]

Thank you! I’ll continue to give you guys great videos.

[@lonzyrt7351]

Man nice video.. love to see people who diy things like this. It's not a hard job if steps are taken seriously and right.. sounds like a beast.. thanks for sharing

[@IsThatGeneral]

Thanks for the love 🙏🏾

[@AjarZzzz]

Piece of advice doing these is to thread the bolt in the hole on the slots for the header and hasket and sit the header and hasket on the bolt and you can swivel the header back and forth for the second hole

[@Nick102195]

This is underrated advice!!! After I figured this out I felt so relieved 😂

[@that1993mustang]

Lmao the sudden urge to disconnect the battery AFTER the fact that you sparked on the starter. Got me dead😂💀

[@IsThatGeneral]

💀💀

[@fillupbanks7885]

Sound Good!!! Good work!! Straight forward!! I loved how you made mistakes, and how positive you were!! I'm gonna do mine in about a week!!

[@IsThatGeneral]

Fillup Banks thanks man‼️ tell me how it goes‼️

[@Mutedx0331]

“I got here and got excited” I feel it bro😂happens to everybody lol

[@IsThatGeneral]

😂😂😂

[@alidenver787]

i guess it's kind of randomly asking but do anybody know of a good site to watch new tv shows online?

[@owenari5111]

@Ali Denver Try flixzone. Just search on google for it =)

[@walterjordan7844]

@Owen Ari yea, been using FlixZone for since march myself :D

[@leroyian8836]

@Owen Ari thank you, I went there and it seems to work =) Appreciate it!

[@bol922]

I've been told never use the gaskets that come with the headers. Always get your original equipment gaskets. And the is a socket made just for your o2 sensor.

[@IsThatGeneral]

I couldn’t use that socket because of the angle the 02 is at and as long as you use gasket maker or copper seal you shouldn’t have any problems. I didn’t have any leaks or anything after using the gaskets.

[@ApHoney]

Not gonna lie, i laughed a little when you shorted the starter.

[@IsThatGeneral]

Rick Vaughn shit started shooting sparks 💀

[@playboymusicmpr3108]

Stg I was weak asf said ima disconnect it rq HEY DAVID 😂😭

[@IsThatGeneral]

Playboy Music(MPR) 😂😂😂

[@jordenepps498]

The part you said about it being tedious doing it on the ground hit home for me since my truck has a 5/8 drop lmao

[@IsThatGeneral]

Sheeesh lol. You still got it done though homie 💯

[@jordenepps498]

@@IsThatGeneral nahh not quite yet lmao still in the process of getting my front end worked on so I can finish my drop then I’ll get my headers/exhaust done next 🙏🏽🙏🏽

[@IsThatGeneral]

@@jordenepps498 bet. If you have any questions let me know.

[@9891Daniels]

Get locking header bolts if you install any type of aftermarket headers!

[@IsThatGeneral]

Thanks for the info homie!

[@9891Daniels]

@@IsThatGeneral I got BBK long tube headers back in 2016 I got a leak and could not figure out what it was from, turned out the bolts BBK sent with the headers had backed out! the labor to fix it is insane for the hemi engine , It happened again a few months back and I learned about locking header bolts. . I hope everyone reads this and invests in locking header bolts! They are ALOT cheaper than replacing gaskets and labor . I got quoted 600 bucks per bank for labor.

[@ServantNathaniel]

That boy a beast killin it

[@IsThatGeneral]

Servant Arphaxad thank you🙏🏾‼️

[@showtime313rd]

where did you go to DIY this and have an on-site mechanic? thats dope

[@IsThatGeneral]

@@showtime313rd it was called rent a lift, but it went out of business.

[@AFWalzberg]

Thanks for making this. It's full of helpful info

[@IsThatGeneral]

Glad I could be some assistance

[@20yearsago]

I just ordered some headers and I kind of don’t know how to install them, but fuck it ima see if I learn a thing or two lol

[@IsThatGeneral]

Jason RumbleBee trucks are waaay better to install exhaust and headers on because they have way more room. You can install the headers from where the tires and finder liner are

[@edmondcarter9457]

I love how she purrs. I have a question it looks like the only mod that you have for the exhaust is the headers. Did you had any aftermarket mufflers or deleted anything like the cats or resonators during this video. I have a 05 magnum rt that I want to improve the sound

[@IsThatGeneral]

@@edmondcarter9457 when I bought the car it already had the flow master American thunder exhaust, which I did an muffler delete to them. That’s the exhaust in the video as well.

[@edmondcarter9457]

@@IsThatGeneral I thought about buying that catback kit a while ago. I was thinking about doing longtube headers, midpipe with catts and straight pipe the rest of the exhaust unless I decide to add slp loudmouth 1 mufflers. I might add a catback and just be done with it. I like your exhaust tho. It’s loud but not overbearing.

[@IsThatGeneral]

@@edmondcarter9457 I’ll let you know now lol it’s nice when your driving regular, but once you fold start the car or get on it it’ll be loud like a mustang or straight pipe hellcat

[@edmondcarter9457]

@@IsThatGeneral lol that’s what I need when on the expressway. For the most part I drive the legal limit. I haven’t had a speeding ticket in 6 years

[@WORKanU]

Nicely done sir I'm looking for some headers for my 5.7 hemi 07 Aspen

[@IsThatGeneral]

BBK or pacesetters are the best for affordability and quality. Pacesetter doesn’t cost much either.

[@chachiluv4085]

@@IsThatGeneral I have them now had do new page just got get them on I got muffler system n Tru dual with X pipe 2 super 10s video of it

[@IsThatGeneral]

@@chachiluv4085 about to check it out

[@hemirichie1678]

Great video

[@IsThatGeneral]

Richard Nieves thank you

[@KJsGarage]

Bro how did you tighten up the middle header bolts? Bottom side or top? Them joints are hard af to get to on the passenger side.

[@IsThatGeneral]

ModCityK they are hard to get too. we did a little bit of everything bro. We stuck our ratchet up there and felt for the bolt to tighten it up. We also had the on site mechanic help us out. He had this bendable long extension where he used it to tighten up some of the bolts also.

[@generalgen1542]

Any update on the headers ? Looking to get me a pair of these i just bought a 2016 ram , but I've read many horror stories on the shorty version of these headers...

[@IsThatGeneral]

I’ve ran the BBK long tubes for about 2-3 years. Never had an problem with them. Currently rebuilding the motor so they’re off the engine right now. I’m buying a ram later this year and plan on going with the BBK shorty headers on the ram. I haven’t heard anything bad about their shorty headers.

[@frankieguevara9807]

Great video man

[@IsThatGeneral]

frankie guevara thank you

[@jorge_herediajr]

Great job bro keep it up

[@IsThatGeneral]

Superior Styles Performance thanks bro. I’ll do my best‼️

[@badboyxx99]

Man it’s so damn hard to hear you but I love the is video. I am actually very confused on what mid pipe do I need to put on my car for JBA long tube headers that is on its way. Please assist . It’s 3/4 long tube headers . I have 2018 charger 345 Daytona. And I am looking for catback and not catless

[@IsThatGeneral]

Thanks. Mid pipe replace your cats and match up with the longtubes. You can go with mid pipe that have cats or get off road mid pipes like me(no cats). You can’t install long tubes if you don’t have the matching mid pipes because the long tubes won’t bolt up to your exhaust. The long tubes bolt up to the mid pipe and the mid pipe bolt up to your exhaust.

[@jesussalazar2897]

Got a question but can you get another mid pipe and put it in there with the long tube headers ?

[@wuthenator]

3 years later. How have they held up for you? Looking at bbk for my durango.

[@IsThatGeneral]

Headers are great. Get them!

[@djgblaze1of1]

Nice build

[@IsThatGeneral]

Thanks bro 🙏🏾

[@p4pacrust]

Can't wait to get mine on bro 🤤

[@IsThatGeneral]

VorticoseComb1 you’re going to love it bro. The torque and response is bananas.

[@bandcshow11d6]

How did you get too the two up middle bolts on the passenger side I can’t get my arm or tool anywhere near them

[@IsThatGeneral]

You have to feel for them first then put your bit on then and take them off. That’s how I did it.

[@bandcshow11d6]

@@IsThatGeneral I mean putting on the headers not off. I can’t get my arm up there or a tool to the two top middle ones

[@IsThatGeneral]

@@bandcshow11d6 you’re going to have to get help then. The only way to put them back on without taking the heads off is to put the gasket on the header with the bolts already through the header and put the header on the cylinder head while hand threading the bolts through, then you can use a tool to tighten them up and fasten the rest of the bolts.

[@bandcshow11d6]

@@IsThatGeneral ok let me give you more details. I used studs instead of bolts. So I got my gasket in place I put my headers on was able to use an extension and a wobble socket to get to most of the nuts on. These are some cheap headers from China lol maybe the header tubes are in different places than other brands. I got the driver side header on. But the top two middle studs I can’t access very well. Did you use an extension and wobble socket to get to them? If so then I have no idea what I’m going to do. Maybe drop the engine cradle down lol

[@IsThatGeneral]

@@bandcshow11d6 I did use an extension and adapter socket. You can going from the top then to get to those last two bolts or also drop the cradle

[@saadiaasanchez8378]

great video , your voice sounds just like my boyfriend's it's the weirdest thing 😂 keep up the awesome work !

[@IsThatGeneral]

Saadiaa Sanchez thank you so much 💀💀

[@justdave7520]

Great video. How much would something like this cost to install at a shop?

[@IsThatGeneral]

800-1000 and that’s if you take them the parts and pay for labor. Shops make money off overcharging people for parts plus installation. I was quoted $3000 for a shop to buy, install kooks headers for me. That’s waaaaay too much

[@Bl0cc83]

@@IsThatGeneral 3k what the fucc kind of coke they sniffn honestly this job with customer supplied parts shouldn't be more than 1k and less than 600 dollars.

[@IsThatGeneral]

Elz Da Trucker it’s ridiculous man that’s why I try to do all of my work. It’s really easy working on cars. These shops and manufacturers try to make it seem crazy and hard but if you can do it yourself DO IT and save money

[@IsThatGeneral]

Breckon Carter from a shop? That’s a great price man.

[@iibulllTZz]

HEMIUP i know its not a challenge but in my country they charged 80 kd = 260$ i think its a fair price

[@dariondavis2974]

Nicceee plan on getting long tubes for my ram.....feel like it my be easier without the lift....basically you deleted the cats right?

[@IsThatGeneral]

Darion Davis it’ll be easier to install headers on a ram. You have direct access from the fenders

[@anthony2039]

When i contacted BBK, they said they don’t off catless mids. Did you go with another brand or did they recently stop selling off-road mids?

[@IsThatGeneral]

Everything I have is from BBK. They probably stop making them after the RPM act and everything.

[@chrisanderson7937]

Hey bro it’s called a crush washer I believe

[@IsThatGeneral]

Chris Anderson Thanks bro‼️

[@sketchy5.740]

Did your long tube headers have the extra metal on the passnger side to reach the egr line that goes to your headers ? I wnted to install mine but the headers dident cover the egr hole on the chlinder head what can i do can i still install it without it bei covered

[@IsThatGeneral]

I think you’re talking about the extra long bolt that comes in the pack. If you don’t have it you can do find a 10mm bolt(I think it’s 10mm) and try to fill in that hole.

[@Chronic213801]

Why isn’t the long bolt fitting in the hole you said the long bolt goes in? And ideas

[@IsThatGeneral]

So some of my studs broke off half way inside the cylinder head before the install so I couldn’t install that one bolt.

[@agametheofficial37]

Did your headers come with the gaskets or did you have to order them separately?

[@IsThatGeneral]

Agame TheOfficial headers come with all hardware needed for install

[@rodmitchell8755]

Hey, do you have a way for us to contact you directly with questions? My truck is in the shop right now trying to have these installed amd they are telling me there is no room to put the cats back on and the catalytic converter. 2014 Ram. Are we missing something?

[@IsThatGeneral]

Youre missing the matching mid pipes & you can contact me on Instagram @dreamchaser_4lifee

[@KS1ECQ]

Exc and inspirational!

[@IsThatGeneral]

DON thank you 🙏🏾

[@josejuarez2583]

The ports are square on the 2007 but i got oval gaskets is it ok to use the oval gaskets?

[@IsThatGeneral]

I’d neeed to see a pic. Whatever gaskets comes with the headers are good.

[@DavidJohnson-wy5wz]

Did your check engine light come on after installing the long tubes

[@IsThatGeneral]

No I didn’t

[@joebussurfcastfishing]

What year is the Ram? I have a 2012 1500 quad cab 5.7 and I’m looking into getting arh headers. Do you have to move any lines for install?

[@IsThatGeneral]

Joe Charlin sorry man this is a 2007 Dodge Charger, but the procedure should be the same for your Dodge Ram and no I didn’t have to move any lines just had to remove the 02 sensors

[@pianoguy4949]

Did you see any hp gain without a tune? I’m gonna install some bbk long tubes on my ‘12 Charger R/T. So im curious

[@IsThatGeneral]

Your car will be totally different with headers and other mods before a tune. Then with a 93 or e85 tune you’ll fully unleash it

[@IsThatGeneral]

Forgot to add this part sorry but with the BBK headers also you’ll see 30-35hp just by bolting them on and about 10 more after a tune

[@JuanGarcia-uu9ib]

Hey man do you need a tune after you install long tube headers ?

[@IsThatGeneral]

No you don’t.

[@JuanGarcia-uu9ib]

@@IsThatGeneral thanks man appreciate it! I have a 300s I’ve been wanting to put headers on hopefully it does magic

[@IsThatGeneral]

@@JuanGarcia-uu9ib you’ll get about 20-30whp just by bolting them on before a tune

[@Big_Jules1]

What shop is that?? I’ve never seen shops that have lifts for the public!

[@IsThatGeneral]

Julian Monsalve this shop is called rent a lift but it’s a do it yourself shop. They’re becoming more of a thing now.

[@EliteStricker]

Their called bring your own parts, also the mechanics can help and show you too

[@cri3.v359]

how much does this kinda work normally cost?🧐

[@IsThatGeneral]

Depends on the shop, but easily an $1000 job

[@kingofkingsz7447]

Where did u get ur headers bro

[@IsThatGeneral]

BBK bro

[@josephhouben3018]

Did you need to buy the mids for it to work ?

[@IsThatGeneral]

Yes you have to buy matching mid pipes if you don’t you’ll have to have some fabricated.

[@theproduct456]

What is the estimated time that you did the headers.

[@IsThatGeneral]

theproduct456 would’ve literally taken me 3 hours, but we fought with the heat shields on the exhaust manifolds for 2 hours. The entire install took 6 hours.

[@theproduct456]

Did you put back the heat shields?

[@IsThatGeneral]

theproduct456 no there’s no need to plus the one heat shields won’t fit the longtubes

[@zinxinferno]

Where did you get your mid pipe

[@IsThatGeneral]

BBK themselves.

[@zinxinferno]

@@IsThatGeneral I just put on the headers yesterday just need the mid pipes did your check engine lights go away

[@IsThatGeneral]

@@zinxinferno my engine light was on for other reasons, never had a check engine light for the headers.

[@ronsmoov392]

Did you have to get catless mid pipes ?

[@IsThatGeneral]

No you can get mid pipes that have high flow cats

[@ronsmoov392]

@@IsThatGeneral yeah ik the catted or catless parts just was wondering if you had to buy mid pipes as well but goodlooks my boy

[@IsThatGeneral]

If you go with the BBK headers the mid pipe have to be BBK as well fyi

[@ronsmoov392]

@@IsThatGeneral bet goodlooks

[@rawcummins1665]

Where you get the mid pipes from

[@IsThatGeneral]

The entire setup is BBK.

[@rawcummins1665]

@@IsThatGeneral I tryed to looking them up can’t find them! You have the link?

[@IsThatGeneral]

@@rawcummins1665 you might have to call for them. You’re about the 10th person that said they’re not on the site anymore and ever since epa starting going after tuners and shops a few years ago that’s when BBK took them off the website. Give BBK a call.

[@samuelthurmandiii3505]

Did you have to remove the motor mounts?

[@IsThatGeneral]

No I did not

[@swipedat]

Where did you find the catless mid pipes ?

[@IsThatGeneral]

Everything is from BBK. I think they stop selling them because of the TPM act and all that chaos. You’re like the third person that had told me they can’t find the mid pipe anymore.

[@swipedat]

@@IsThatGeneral could I use a flange as a replacement?

[@swipedat]

@@IsThatGeneral I’m in Virginia also I was looking to just replace the mid pipe with pipe and somehow to get it to connect without welding onto the actual header

[@IsThatGeneral]

@@swipedat I’m not sure, you could find some same sized straight pipe and then cut the cats off the mid pipe and have someone or yourself weld the straight pipe onto the mid pipe replacing the cats.

[@hugodeleon3505]

Don't you have to use impact sockets with impact tools

[@DL101ca]

Don't you have to use running shoes just for running ?

[@arturocamacho408]

Did you had to weld anything?

[@IsThatGeneral]

No it’s a bolt on part. Just replace your exhaust manifolds with the headers and install the new mid pipe

[@corysmith9293]

What kinda shop were u in that let's u use a lift to do your own work??

[@IsThatGeneral]

Cory Smith do it yourself shop. This shop is called rent a lift.

[@corysmith9293]

@@IsThatGeneral hell yea. I'll have to see if theres any in my area otherwise I'll just jack it up and throw it on jack stands. Keep up the videos bro.

[@IsThatGeneral]

You should have some in your area and thanks I will homie. Have some Camshaft, and other mod content coming. I’m fully building the charger.

[@corysmith9293]

@@IsThatGeneral hell yea gunna be badass

[@309cars]

Was it stock exhaust besides headers???? Please answer

[@IsThatGeneral]

Has flowmaster exhaust

[@309cars]

@@IsThatGeneral cats and resonators?

[@IsThatGeneral]

@@309cars cats got replaced with BBK mid pipe

[@lukewhoitis]

Do you have to get the mid pipes with the headers or can I put the headers on my straight pipe 5.7

[@IsThatGeneral]

Yes you have to get matching mid pipe, BUT this is how it works. The headers go down to the matching mid pipe(you can choose high flow cats mid pipes or mid pipes without cats), which replaces your OEM cats, and then mid pipe connects to your straight pipe. My Dodge Charger is straigt piped.

[@lukewhoitis]

@@IsThatGeneral thanks man just getting started on my build get her 3 weeks ago. ‘18 charger rt 47k miles Just ordered an afe momentum gt air intake and 5 inch carven tips along with got it straight pipe and 1 percent all the way around 30 windshield. Long tube headers and a tune are my next purchases 💯🦾

[@IsThatGeneral]

@@lukewhoitis yessir. That thang is about sound nice bro ‼️

[@345toni]

@@IsThatGeneralwhere’d u get ur catless mid pipe? i’m only seeing catted

[@IsThatGeneral]

@@345toni BBK. I think you have to call to order them now. Ever since the EPA tried shutting down the car community a few years ago BBK stop listing the catless mid pipe on their website.

[@delaunojones6231]

My car did the same thing ( sparked ) and now my car doesn’t want to start up, just hear one click

[@IsThatGeneral]

You probably shorted the starter. Might have to buy a new one. Try taping onto the starter while having someone crank up the car. If it cranks then it’s the starter.

[@FredyFrog10]

Does the delete of the catalytic converters leave a gas smell in the car?

[@IsThatGeneral]

Fredy Velasco Ortega Jr. yes when you sit in the car while it idles you will catch smells of gas. It’s not bad though

[@FredyFrog10]

HEMIUP what was the tune that you did? I’m looking to do an exhaust setup like yours.

[@IsThatGeneral]

Fredy Velasco Ortega Jr. that tune was a Diablosport 93 oct tune. When you buy performance chips they come with pre tunes already that you can install on your car yourself

[@FredyFrog10]

HEMIUP besides this. When should a tune be done? If I open up my whole exhaust,how do I know what tune to set on it?

[@IsThatGeneral]

Fredy Velasco Ortega Jr. a tune should be applied to your car when have decent mods like full bolt on. You don’t need a tune if you only get exhaust, but if you get a brand new exhaust system plus long tube headers and that’s all you want to do then get a tune. A tune just reprograms the entire car’s computer to run with the new setup instead of running like it has a stock set up and also there’s many way to do a tune. You can get a dyno tune or a performance chip tune. The best tune to get is a dyno tune. That’s what I’m getting next when I do the big install.

[@EliteStricker]

Any way to just install the longtube headers?

[@IsThatGeneral]

EliteStricker I don’t understand your question. Are you talking about price or time?

[@High_altitudee]

I think he’s asking do you need a mid pipe to install or can you install with your normal exhaust

[@EliteStricker]

@@High_altitudee Yes thats what I was asking. Have an exhaust manifold leak or broken bolts, looking to put aftermarket headers

[@IsThatGeneral]

Just a Nice Chair they will come with matching mid pipe that goes with stock or modified exhaust

[@EliteStricker]

@@IsThatGeneral OK aweosme thanks

[@ReeceM69]

Yes that’s a lock washer

[@IsThatGeneral]

Reece M thanks homie

[@gilhernandez605]

Where did you get the headers?

[@IsThatGeneral]

GIL HERNANDEZ bbk website

[@IsThatGeneral]

So go to www.bbkperformance.com

[@rhurtadorh32]

No engine light due to no cats?

[@IsThatGeneral]

Nope

[@kentrailwilliams]

You do tuners ?

[@IsThatGeneral]

kentrail williams I have a turner im working on now. What kind of turner do you have?

[@kentrailwilliams]

I don’t have one I was gone ask do it really work

[@IsThatGeneral]

kentrail williams oh are you asking me do I know how to tune a car?

[@kentrailwilliams]

HEMIUP yeah or which one i need to order for my 2008 Dodge Charger rt 5.7

[@IsThatGeneral]

kentrail williams you need to order bbk ceramic longtubes with high flow cats

[@rhurtadorh32]

Whats the item number on these?

[@IsThatGeneral]

rhurtadorh32 part number 16470 for the long tubes

[@That_Stock_Eco]

How long did this end up taking you

[@IsThatGeneral]

Dilyn Puckett took about 6-7hours. Would’ve took me 3-4 hours, but I had to fight with my heat shields for about 2 hours to get them off the OEM manifolds. It’s a very easy job tbh. It was the first time I ever touched my exhaust system

[@anthonyvanwinkle3030]

Mine were a B!tch they took about 8 hrs I got stainless works BUT taking them off was hard my mid pipe got stuck I had to cut welds on my exhaust cause my y pipe & muffler lined up directly next to each other not to mention the bold that snapped off in my head that took 3hr to drill & get out 🤦🏽‍♂️🤦🏽‍♂️🤦🏽‍♂️

[@IsThatGeneral]

Anthony Van Winkle I think BBKs are the best when it comes to install

[@michaelshuler3349]

Do you still have a cel after the tune?

[@IsThatGeneral]

What do you mean cel?

[@eldiablort1461]

@@IsThatGeneral check engine light

[@IsThatGeneral]

@@eldiablort1461 you have one?

[@sleepymalo06]

What are the prices to rent a space in that shop ??

[@IsThatGeneral]

sleepymalo06 $200 for the whole day plus to use all of their equipment at rent a lift.

[@christian6172]

Do you have an instagram that i can look at, need to give you a call and ask a few questions on some things

[@IsThatGeneral]

Christian Flores DreamChaser_4lifee

[@DavidJohnson-wy5wz]

What mid pipes did you use

[@IsThatGeneral]

Off road mid pipes

[@captainobvious5993]

What year is this car

[@IsThatGeneral]

Captain Obvious 2007

[@brianpalmarin7556]

Long tube header install, requires a tune

[@IsThatGeneral]

It doesn’t but you’ll get optimum performance with a tune.

[@MrEvilTag]

If you get the 02 extensions and no codes you dont need one, but youre leaving A LOT of power on the table without one

[@trevorrutherford9098]

Dam just a lube tech ha

[@lyleslaunwhite3227]

You smoked too much before the video 🤭

[@tmangan327]

How you gonna be in mechanic and say you gonna take your car to another shop........😟 and you called a stater an alternator....🤣 And NEVER use impact gun on chrome sockets. That is what impact sockets are for

[@IsThatGeneral]

Tim Mangan I’m a car enthusiast, not a mechanic 🥴🥶💀💀

[@tmangan327]

So that shop just let you use there bay and there lift

[@IsThatGeneral]

Tim Mangan Yes & no. Its a DIY shop called rent a lift. You pay to use all of their tools and lift for the day or however long you need it.

[@tmangan327]

@@IsThatGeneral That's funny I'm a mechanic in philly and me and my wife were thinking about starting a business like that we didn't think it would ever work and that's funny that they have one of those where you are what state are you in

[@IsThatGeneral]

Tim Mangan Virginia