How to install Mercedes C Class W205 NTG5.0 YEEHUNG 12.3 "CarPlay Android auto screen(GLC X253 Same)

Replace your OEM screen with a 12.3-inch Blu ray anti glare Android screen. This video provides detailed installation steps!
You can realize wired and wireless Carplay functions, wired and wireless Android auto functions, and even project your mobile phone screen onto the Android display screen.
Product features:
1. Wireless and wired Carplay / Android auto / morrio link functions;
2. 12.3-inch large screen, capacitive touch; Up to 1920 * 720 HD resolution;
3. Use Qualcomm snapdragon 662 processor, 8-core processor and 6 + 128G storage.
4. Support all functions of the original vehicle; Support command knob to control Android system;
Purchase link:
www.amazon.com/dp/B0BNPYFHTW?...
Reversing rear view camera:
www.amazon.com/dp/B09TF1WJR6?...
Front Camera:
www.amazon.com/dp/B09TDXHXG1?...
After-sales service email:
[e-mail]

[@vasil7410]

This certainly won't void the warranty on your car. 👍

[@pempcar]

Thanks

[@Jack7VideoBlog]

What is screwdriver do you use to open?

[@InuVideos]

Can I plug in my iPhone for wired (not wireless) CarPlay? if so, do I plug the phone into USB 1 or USB 2?

[@pempcar]

Yes ,you can get the wired carplay via USB( the label is Carplay).

[@Bigdreamer_90]

Hello, I'm struggling to put back air wents back to slide/click , any easy suliotion?

[@MBW205]

I have same problem hhhhhh🤣🤣🤣

[@isalighting]

With a GPS module and WiFi antenna, can I stick it under the glove compartment so that the items on the right are not affected? Or can I put it right next to the head-unit? I don't want to stick it on the windshield.

[@pempcar]

GPS antenna must be placed in a place without metal obstacles, because it has to receive satellite signals , WIFI antenna can be placed in the location you described.

[@isalighting]

@@pempcar Can I place the GPS module and WiFi antenna directly beneath the grille of the center speaker, behind the screen? Will it affect the speaker or the GPS/WiFi signal? I don't want to run wires around the front windshield.

[@pempcar]

@@isalighting It is recommended that you place them in a location without any metal coverings. This way the signal strength will not be affected.

[@jiewenmai]

I did the same procedure, but why my backup camera has no signal? Did I miss something?

[@pempcar]

your camera is the oem or aftermarket cameara? you need set the camera selection in the settings.

[@clinteastwood8637]

Hello, if you dont want to use android , is it possible to use this 12 inch display ? Does it work like normal (original) display if i dont want to instal android box and antenas?

[@pempcar]

You are right, it works just like the original car screen. But because the original screen is 7", the original interface will be enlarged. The aspect ratio is also different. What kind of effect does it have? You can refer to the content starting from the 14th minute and 20th second of the following video: kzbin.info/www/bejne/pnm2nKxuq9eAopI

[@george3957]

I factory reset mine and now it’s showing me only half a screen, can you help me fix it as I tried everything please

[@richiesosa9266]

Any issues using the oe 🎤 or making phone calls?

[@pempcar]

if you want call by oem mic, you need connect the bluetooth to Oem, you can Not call by Yeehung android and use the oem MIC.

[@yacubahmed4165]

Guys my factory head unit is stuck in reboot loop and lines on screen can I fit this or does my main head unit still need to be replaced ?

[@pempcar]

Sorry, if your oem headunit is not working properly. You cannot install this android device. It is recommended that you restore the function of the original car host first.

[@MagnaVerita]

Time installation?

[@alessandrofigliolia1063]

Pls,i want know if is possible for my car : Mercedes A class w 169 year 2011,thanks,Alex

[@pempcar]

Sorry,this one can not fit your 2011 w169.

[@lyfewithdakellys4777]

How do I switch from one phone to another on car play? It’s not easy switching

[@pempcar]

If you need to switch from phone A to phone B, your phone A disconnects from YeeHung Bluetooth and just let phone B connect to it.

[@michaell3440]

I have COMAND NTG 5.2 on my 2021 C300 convertible. Will it work?

[@pempcar]

Sorry, can not.

[@Devynderrickleejohns]

Everything seems to work except I get no sound I have to use the sound from the Mercedes and it is always a few seconds behind how do I get the sound to work with the new screen

[@pempcar]

Yes, this is because the android sound comes in from the OEM USB, you need to use a separate amp box for android to achieve it without delay.

[@Devynderrickleejohns]

@@pempcar I really appreciate the response…. I don’t hear any sound unless it’s over Bluetooth….what must I have done wrong?

[@pempcar]

@@Devynderrickleejohns Dear, you must connect the AUDIO usb BOX to the USB port of your armrest box. Please check the installation content starting at 24:30 of the video. Then every time before you enter Android, select the USB mode in the OEM interface.

[@Devynderrickleejohns]

@@pempcar One last question I did a factory reset on it because I couldn’t figure out why I couldn’t get any sound after I did that when I try to connect a CarPlay it says zhijian activation app to scan QR code how do I get CarPlay back I’m not sure also are there any other settings that I need to adjust back after that factory reset?

[@pempcar]

@Devynderrickleejohns if the oem interface display normal， you don't set other option. If you find other problems, please feel free to contact me：[e-mail]

[@AnwarAli-pi2nz]

Hi, does it work on Mercedes GLC coupe 2017? Can you send me the link so I can make a purchase

[@pempcar]

Yes, it fit your GLC 2017. www.amazon.com/YEEHUNG-Android-Carplay-Mercedes-2015-2019/dp/B0BNPYFHTW

[@merouanedz2212]

where can i see the features of this specific android screen

[@pempcar]

Below is a partial demonstration of the functionality. kzbin.info/www/bejne/rZjGd2yCbrRrhNE

[@gjkij5672]

Does this void warranty?

[@pempcar]

no

[@eyesboy507]

My car is gla250 2015 end,canada,can use ?

[@pempcar]

Sorry, this one can not fit your gla250 2015.

[@giannisbatas7184]

i have one slightly used for sale. located in new york, usa.

[@pempcar]

Car or Android screen?

[@giannisbatas7184]

@@pempcar lol.. Android screen

[@pempcar]

@@giannisbatas7184 It was android11 or android 10?

[@giannisbatas7184]

@@pempcar 11

[@giannisbatas7184]

@@pempcar android 11

[@VaanKArt]

After I install the Android screen my touchpad stop working. Did I do something wrong?

[@pempcar]

The original touchpad only worked in the OEM interface. It does not work in the Android interface. If it doesn't work in the OEM interface either, could you please help me to check if the wiring harness is all connected, or check if the protocol selection of the Android screen factory settings for another NTG 5.0 will work? If it still can't be solved, please contact the after-sales service team at [e-mail]

[@aquahobbyy]

hello i have the same screen. but the knob does not work, I can not control it in the android and original menu. do you know what could be the reason? ntg5 best regards

[@pempcar]

Dear，Are your knobs not working all the time? Or did it work normally for a while and didn't work? If it is always like this, you can check whether the wiring harness of the original car knob is firmly connected, or is there any wiring harness that is not properly connected?

[@aquahobbyy]

@@pempcar so on the original screen it works. when I connect the android does not work, it does not react. all wiring harnesses

[@pempcar]

​@@aquahobbyy I understand what you mean. I want to know if the knob has no effect after replacing the Android screen? 1. If you check that the wiring harness of the knob is connected correctly, you can check if the CAN PROTOCOL setting is correct, Settings>factory>pass word 190627>can protocol>pls select NTG5.0(0 or 1)

[@aquahobbyy]

@@pempcar If I do such settings, the knob also does not work. could it be a cable problem?

[@pempcar]

@@aquahobbyy I recommend reinstalling as per our video if it still doesn't work. It is recommended that you apply to the buyer to replace a product. Because both the wiring harness and the Android screen may cause this problem.

[@raffaelkinscher-ry8ry]

rear camera not working for me on the new display it says no signal why please help me

[@pempcar]

if the car has the oem camera, you need selet the oem camera option in the system settings. If you still can't solve it, please send the purchase order number and problem to our after-sales service team email at [e-mail]

[@danishows100]

Sooo… I’m worried about rear camera,is it work? Just choose a right settings? Thank you!!

[@mgiesen32]

WIll this work with a 2016 Mercedes C300?

[@mgiesen32]

Specifically, a 2016 Mercedes C300 W205

[@pempcar]

if it is a ntg 5.0, this one fit tyour car.

[@mgiesen32]

perfect! Based on the amazon link you provided in the video description, I have confirmed that I do have a NTG5.0 system per their screenshots on the listing. Great! Thanks so much for confirming this. I can't wait to save up to buy and install this unit myself! @@pempcar

[@maxcheung6269]

My keyless key can't be detected after installation.

[@pempcar]

After install It won't affect your keyless functionality

[@arandomstranger99]

Can u do it on a manual? With gearbox

[@pempcar]

Yes

[@arandomstranger99]

Could U pls post a video about that I can't find nothing on gearbox :( ik how to get it out but I'm scared about the cables

[@arandomstranger99]

@@pempcar I have already installed the digital cluster but idk about the screen cause it's a lil different on a manual gearbox

[@pempcar]

@@arandomstranger99 If you buy a YeeHung Android screen and manual transmission, you need to select manual in the settings, otherwise the reversing camera will not work.

[@Miguel_Amaral]

No dsp box in ntg5 system, possibly got delay in audio.

[@pempcar]

Yes, you are right.

[@burrteo5037]

How can we solve the delay issue for ntg 5.0

[@ricbar437]

Manque un peu de délicatesse le monsieur !

[@zakibalamita6453]

worst job ever

[@nathanielphan]

im getting no signal to the oem ntg system. what setting should i do

[@pempcar]

Please help me check whether the original car radio Fm has sound? If so, it could be a problem with the LVDS harness connection. At the same time, please ensure that your agreement must be NTG 5.0 If it still doesn't work, please send an email to our after-sales service team at [e-mail]