How to Install Mitsuba Dolce 3 with Echo/Reverb Sound! | Toyota Hilux Conquest

An in-depth guide on how to cleanly install a Mitsuba Dolce III on your vehicle, specifically on a Hilux!
Subscribe for more car DIY videos: / @uazap
Share this to a friend: • How to Install Mitsuba...
Check the previous video: • How To Install JAOS Mu...
Like my FB page: / uazap21
Follow my Instagram: / uazap21
---------------------------------------------------------------------------
Where to Buy Mitsuba Dolce 3?
Parts Papi: profile.php?...
Daikoku Imports: profile.php?...
TSA: / theshop.automotive1
Kamil R: / kamiltow
JR Onofre: / johnrainartonofre.santos
---------------------------------------------------------------------------
Here are some product links!
Order using these links to support my channel! Thank you!
20/22 AWG WIRE (pick STRANDED):
Link 1: invol.co/cll2nqj
Link 2: invol.co/cll2nr1
INGCO HEAT GUN:
invol.co/cll2nrc
EYE/O-TYPE TERMINAL KIT:
invol.co/cll2nrs
SELF SOLDERING BUTT CONNECTOR KIT:
invol.co/cll2ns2
HEAT SHRINK TUBING KIT:
invol.co/cll2ns8
TOYOTA HORN CONNECTOR:
Link1: invol.co/cll2nso
Link 2: invol.co/cll2nsv
WIRE STRIPPING & CRIMPING TOOL:
invol.co/cll2nt6
MALE & FEMALE TERMINAL CONNECTOR KIT:
invl.io/cll2ntu
ELECTRICAL CONDUIT/INSULATOR HOSE:
invl.io/cll2nuy
PUSH SWITCH (pick TOYOTA SMALL for Revo & Conquest):
invl.io/cll2nvb
---------------------------------------------------------------------------
This channel is all about DIY car maintenance, detailing, and car care product review!
New videos every week!
Subscribe:
/ @uazap
---------------------------------------------------------------------------
Contact Joshua (uazap)
For collaboration, product review, and etc:
[e-mail]
---------------------------------------------------------------------------
Video Chapters:
0:00 Intro
0:07 Before and After
0:18 Things You Need
1:53 Wiring Diagram/Overview
5:04 Removal of Stock Horns
6:09 Installation of New Horns
7:07 How to Cleanly Connect the Blue Wire
7:53 How to Connect Wires Using Terminal Connectors
11:08 How to Connect Wires Using Self Soldering Butt Connectors
13:47 How to Connect Wires Using Quick Splice Connectors
15:08 How to Connect Wires Using a Soldering Iron
16:58 Connecting the Blue Wire
17:22 Setup in the Engine Bay
18:50 Putting a Conduit on the Wires
19:43 Switch for Echo Mode
24:59 Horn Sound Check
25:59 Where To Buy?
26:10 Mitsuba Dolce 3 Price
26:35 Outro
---------------------------------------------------------------------------
#hilux #diy #mitsuba
Mitsuba Dolce 3
Mitsuba Dolce III
Mitsuba Horn Sound Check
Mitsuba Dolse
mitsuba dolce 3 horn sound
mitsuba dolce 3 sound
mitsuba dolce 3 install
mitsuba dolce 3 horn
mitsuba horn
mitsuba dolce 3 hilux
how to install mitsuba dolce 3
hilux horn upgrade
hilux horn install
hilux horn replacement
toyota hilux horn upgrade
hilux horn
diy installation mitsuba dolce 3
mitsuba dolce 3 installation
piaa superior bass horn
mxr horn
mitsuba car horn
hilux air horn
busina hilux
hilux horn replacement
busina para sa hilux
busina
malakas na busina
bosch europa
jdm horn
hilux accessories
hilux modification

[@uazap]

⚠PLEASE READ⚠ For the switch, pick TOYOTA SMALL on newer Toyota models (2015-present) otherwise pick TOYOTA BIG for older models. --------------------------------------------------------------------------- Where to Buy Mitsuba Dolce 3? Parts Papi: facebook.com/profile.php?id=61555789723066 Daikoku Imports: facebook.com/profile.php?id=61554805010007 TSA: facebook.com/Theshop.automotive1 Kamil R: facebook.com/kamiltow JR Onofre: facebook.com/johnrainartonofre.santos --------------------------------------------------------------------------- Here are some product links! Order using these links to support my channel! Thank you! 20/22 AWG WIRE (pick STRANDED): Link 1: invol.co/cll2nqj Link 2: invol.co/cll2nr1 INGCO HEAT GUN: invol.co/cll2nrc EYE/O-TYPE TERMINAL KIT: invol.co/cll2nrs SELF SOLDERING BUTT CONNECTOR KIT: invol.co/cll2ns2 HEAT SHRINK TUBING KIT: invol.co/cll2ns8 TOYOTA HORN CONNECTOR: Link1: invol.co/cll2nso Link 2: invol.co/cll2nsv WIRE STRIPPING & CRIMPING TOOL: invol.co/cll2nt6 MALE & FEMALE TERMINAL CONNECTOR KIT: invl.io/cll2ntu ELECTRICAL CONDUIT/INSULATOR HOSE: invl.io/cll2nuy PUSH SWITCH (pick TOYOTA SMALL for Revo & Conquest): invl.io/cll2nvb

[@ky71621]

Thanks for the very detailed video. Soon gotta have these pair soon. ❤ Anyway, are you selling those stock denso horns ba?

[@uazap]

Thank you po! Would appreciate if you could share it po! Thank you! Unfortunately hindi po. Ipang papalit ko sa Innova hehehe

[@user-gm4py6lo2n]

ganda bro

[@PedzWorks]

Clean install papi! 🙌🫡

[@uazap]

Salamat sa inyo ni Jayel! ❤

[@PedzWorks]

@@uazap welcome pre!

[@RUBZTER300]

Gawin ko to, angas 🔥

[@uazap]

Don't forget to share! Thank you!

[@kingdomtreasures888]

Hi sir I would appreciate ur help…my oem horn config is 2horns with two wire connectors for each. I removed both horn sockets attached the two blue wires in one horn’s two wires 1-1 tapped the fused red wire in positive battery terminal unfortunately mitsuba horn did not work…. Am i doing this the wrong way? What should I do sir?

[@uazap]

You got the blue wiring right. Did you attach the black to a ground? Make sure that all the wirings are connected properly especially the ground. Also make sure you connected the right wires to the right horns.

[@kingdomtreasures888]

@@uazap sir also am I correct that the 2 blue wire function as a switch? If this is so doesn’t it have a supply already and now with the new horn another red wire is attached to a positive line?

[@user-dw2rv5ru5r]

Sir ask ko lang experience ng mga kagrupo mo club mo about 4x2 matic gusto mag 285 ng gulong? Kaya po ba ng transmision?

[@uazap]

Kayang kaya kahit 2.4L na 2GD!

[@charlievillanuevavlog]

ayus

[@AlpasPH]

Pogi ng tunog!

[@uazap]

Satisfying gamitin sa mga kamote 😂

[@user-to1tp7wy8h]

Sir anong size nang insulator wire ginamit nyo?

[@uazap]

Check at 0:44 po Nandyan po nakalagay mga ginamit ko po

[@justineloresco8584]

Hello sir! Ask ko lang po sana if okay lang na nakaside yung butas ng horn? Like hindi siya facing down. Or dapat nasa baba yung butas sa orientation ng horn?

[@uazap]

Okay lang naman sir. Pero mas okay kung nakababa para di pasukan ng tubig o hindi mag ipon ng tubig. Pero pinaka importante ay di didikit o tatama anywhere yung mismong busina

[@justineloresco8584]

@@uazap thank you sir!

[@jakejavier1673]

Sir, is rust normal sa mga hilux? Kinocoat na ba nila sa casa bago irelease? Napansin ko kasi sakin, may mga rust sa welding points sa may ilalim

[@uazap]

Pretty common sa lahat ng mga sasakyan ngayon. Sand it, clean and then pinturahan if it bothers you. Pero di naman rust yan na agad agad kumakain ng bakal. Kung baga prng surface rust lang yan. Pero deep inside may coating na yan bago ipaint na resistant sa rust. May optional nlng na undercoat na inooffer ng mga casa as an additional layer of paint

[@yoshuavillar]

bro is sus with butt plugs 😂

[@uazap]

(Wire) stripper + butt plug 🤨🤨🤨

[@yoshuavillar]

@@uazap on a serious note, thanks for this video! Very informative and comprehensive, and I love your attention to detail. Mga kanto mekaniko would just use plain old electrical tape for this stuff lol

[@uazap]

@@yoshuavillar I had enough with those kind of installation hahaha Ang dumi at parang minadali lng Prone pa sa issues hahaha Actually kahapon lang napansin namin na hindi gumagana yung isang busina sa kotse ng kapatid ko. Nung binaklas namin, nakita namin na yung ground wire minadali lng. Walang proper terminals sa dulo. Inistrip lang tapos binuhol sa terminal ng busina at sa ground 😅

[@russelsantos1024]

No relays needed na po?

[@uazap]

Di na po need magkapit. Meron na pong relay yung module. 😁

[@ETW1]

Pap pap dol 😂

[@uazap]

📯📯📯!!!

[@charlievillanuevavlog]

ayus

[@uazap]

Thank you po!

[@charlievillanuevavlog]

opo he he