HOW TO INSTALL MOEN 3 PC.LAV. FAUCET

[@GuitarJesse7]

For those who are inexperienced, you really should have made mention of plumbers putty on all the necessary pieces. Otherwise really helpful. Thanks.

[@richie.edwards]

Thanks. Not sure why the video doesn't show how you got the faucet and handles on.

[@jair8808]

That’s the only reason I was watching the video 😂

[@raygleba8779]

Good install video, Tim. Can you follow up with the removal of the handles, for cartridge replacement and aerator removal to clean it?

[@chuckcapage6238]

You didn’t need to use a sealant when placing the valves and shank to the sink?

[@Vinlyguyx420x]

Thank you for the run down dude! You’ve probably helped SOOO MANY people with this video! You are a saint 🙏🏻

[@Vinlyguyx420x]

You’re my new KZbin Journeymen I’m definitely subscribing Thank you for your hard work and even harder work posting this stuff for everyone’s benefit!

[@filipinoy7937]

How do you get two wrenches when the sink is in place lol. Barely any room lol.

[@Free-g8r]

You have to use a basin wrench. A regular wrench or channel locks can't fit

[@frankferret1038]

Thanks Tim nice video ,Frank from Franks fix it services in St. Pete Florida.

[@romantrans1]

I had to watch this video to double check the installation. I bought a set of these taps at Lowes the C clips were missing. It was the only set of Moen taps they had in stock. I returned them and drove to Home Depot and bought another set in an unopened box and the C clips were also missing in that box. I bought Moen because I was told they are the best. The supply lines setups look Mickey Mouse. I think I've lost track of fuel and time wasted on going back and forth to hardware stores because parts are missing in something. Unimpressed with Moen.

[@rayjaypaulsen]

Good video Tim, Have a good Sunday!

[@GrowFamilyNetwork]

I see you didnt show how that tailpiece that comes from the sink is not a true 1 1/4 inch piece and doesnt go into a 1 1/4 inch p trap... what did you do to remedy this I see the camera didnt go all the way up to show that top piece of that p trap system.... I'd appreciate the info on the fix its racking my brain

[@TheWorks95]

Did it come with the shut off valves too? What’s the size on both ends

[@leahsdreams]

Nice integrated overflow drainage. Top quality stuff.

[@paytonramirez1146]

You don't show how to make the handles tight and steady straight!!!

[@JanineCooperMoren]

I have this faucet... and it sprays everywhere - does not have a nice 'waterfall' flow like yours. Going to try cleaning the aerator but any other ideas why it sprays? I've seen several reviews on HD about the same problem. Thank you!

[@True2U08]

Where you able to fix that problem. Having the same problem with mines

[@danielcarter491]

Yea, but how would I connect 3/8 inch copper supply lines to those 3/4 inch fittings?

[@alen9611]

My handles are shaky anytime I adjust them to be straight like yours.. when I put them in and their not straight no shake. Do you know what it could be?

[@raptr49]

Nice video, but you left out how to install the handles and spout.

[@HomelessOnline]

Excellent video, thank you. Very helpful.

[@judithdwyer6158]

You omitted the part about how to hook up the pop up mechanism for the drain....which is the part I can't figure out.

[@MultiEd34]

Excellent video. Very helpful.

[@garyjohnson4727]

You cut out the part I needed to see. Knob install

[@edymendez7440]

That was a really good help!!! Thanks a lot to you sir!!!!

[@bicmitchum4091]

Can you please tell me the measurements of the hole that you cut in the countertop please?????

[@derekcash8483]

Thanks Tim That is an awesome video for the do-it yourself er !!

[@jestes7]

How in the freakin world do you tighten the 1 1/4 nut for the handle (and loosen old ones) the space is way too tight it’s impossible it seems I’m stuck

[@aa-fh4fh]

I have this installed and the water pressure is very low and it comes out in a weird pattern. I can’t seem to remove the aerator though. What should I do?

[@brandonevensen1049]

I know this comment is from a while ago, I'm having the same issue. Did you ever find a fix?

[@aa-fh4fh]

@@brandonevensen1049 yes the issue was solved only after I contacted Moen. They were great. Sent me new parts and everything.

[@brandonevensen1049]

@@aa-fh4fh thanks for the reply, what ended up having to be replaced?

[@mirelurk-fish7387]

The quality between a big name like moen and random China facuets found on amazon or eBay is night and day

[@adrianmorales7396]

Thank you Tim! I am actually installing two of these guys, I am fighting with the drain pipe it looks to be too long for my P-trap, I might have to get an elbow perhaps? could you please educate me illuminate me with your knowledge please? Thank you in advance and keep up the great American work

[@chetmyers7041]

Did you end using a saw to shorten the drain pipe? Be sure to debur the plastic, or hair will snag on the sharp bits.

[@pedrorincon9683]

Honestly, you helped me too much

[@eileenczerwinski5483]

Why are my hot and cold not tight on top of sink??

[@briang5801]

No plumber putty needed ?

[@2tallB]

Yes, every piece mounted on the vanity would have putty on the topside. As per instructions.

[@Free-g8r]

@@2tallB I thought that too. But the Moen manual I have doesn't mention where to put the putty for the handles. It just mentions to do this for the faucet. For the handles though I put putty around the washers that sit against the sink. I hope that's the right place

[@Ehsan3971]

Wonderful

[@PLUMBINGWITHTIM]

Thanks for watching

[@brionburkett2754]

Thank you!

[@pedrorincon9683]

Thanks so much

[@luisfernandez7734]

Gracias amigo