How To Install Mustang Lower Torque Box Reinforcements (79-04)

Lower Torque Box Reinforcements: lmr.com/item/L...
This lower torque box reinforcement kit is manufactured from eleven gauge steel, so it will add plenty of beef to those aging, factory torque boxes. They will feature bolt in or weld in installation, however we do recommend welding them into place to further maximize the strength of the reinforcements. All needed hardware is included with the support plates and brackets.
Mustang Fitment: 1979 (79), 1980 (80), 1981 (81), 1982 (82), 1983 (83), 1984 (84), 1985 (85), 1986 (86), 1987 (87), 1988 (88), 1989 (89), 1990 (90), 1991 (91), 1992 (92), 1993 (93), 1994 (94), 1995 (95), 1996 (96), 1997 (97), 1998 (98), 1999 (99), 2000 (00), 2001 (01), 2002 (02), 2003 (03), 2004 (04) All (Excludes 99-04 Cobra w/ IRS)
_____________________________________________________
KZbin: www.youtube.co...
Facebook: / latemodelresto
Instagram: / latemodelresto
Twitter: / latemodel_resto
Google +: plus.google.com...
Late Model Restoration LMR SVE 5.0Resto ______________________________________________________
Use of this video is subject to the terms as set forth in our LMR Install Video Disclaimer | lmr.com/page/l...

[@1991tommygun]

Love how people came up with fix's like this, really saves the cars

[@tomasgomez5678]

You guys have very valuable information for the do it yourselfers, Thanks

[@crazypyro13]

Perhaps you should do an install video for those of us with 94-04 mustangs so you can show us how much we need to trim out of the opening to get these to fit. It's not just 94-95 mustangs that need to do some trimming.

[@NezahualcoyotlLasFlores]

Broke mine before i knew about this 😂 70mph and boom lower control arm went bye bye

[@travis00017]

Anyone know if the bolts on the uppers and lowers stick through enough to cut into the back seat of the hatchback models? I can't check for clearance since my whole car is torn apart. I see some people put the nut on the underside of the car to gain a few more millimeters of clearance.

[@cesar101387]

Is there a video for the upper ones?

[@joshuacollette1975]

I got torque box reinforcement with a pair of subframe connectors and they don't look like those ones

[@Pushrodlife]

Thanks for sharing

[@Kenscorner12]

Always have your buddy weld it then no one can roast your welds

[@jamierivera1543]

Both of my mounts are rotting pretty bad would those be good to put in to support it or should they be redone 94gt

[@fearlesshorsepower8065]

will this kit still work for my 2000 mustang....my driver side rear control arm ripped out bolts and a chunk of the factory torque box what should I do plz help

[@yellowdoghnut45]

if you weld it, you dont have to bolt it in still?

[@NOSKIDPLATE]

yellowdognut45 nope

[@uvebfdho]

Your still gonna need to use the bolts to sandwich the tourqe box to the floor pan

[@cynistersix]

Whats the padding called under the rear seat on the floor? Is there a replacement piece/part no. for it? I pulled mine and its a bit worse for wear.

[@charleshenson4183]

cynistersix the guy called it juke padding :-/

[@JS.990]

good after noon LMR. I have a question, I'm in the middle of an issue with my 1990 Mustang Gt in which I'm trying to install a Double Din stereo. But the thing is, my shifter will most likely hit the screen. so I was wondering if you can make a video of how to lower the AC noobs to the bottom and the stereo to the top with the proper material. thank you.

[@Elver_Galarga_jugo]

Josue Sanchez just heat up and bend your shifter handle, this is especially easy with manual cars

[@xai38-809]

Radio relocation kit

[@hunterleazer3138]

Why would u not weld theses it's the only way to truly make them work

[@Baddeal]

Get beefier ones and Weld all of it. Weld any part of it and make it strong. Just witnessed some starting to tear off and have to be overhauled. Don't bolt them in , seriously.

[@charleshenson4183]

Dillon Nipp bolt them & weld them & add the competition engineering plates,then weld those as well as the perimeter of the torque box itself & use mm full length subs,yes do that.

[@pjcustoms8508]

What kind of paint did you use after the install?

[@Elver_Galarga_jugo]

PJ Customs the kind that protects surfaces... Lol. Seriously though it doesn't matter, it's just so it won't rust so you can do Rust-Oleum or car paint or anything that will protect the metak

[@smokeum12]

looking kind of Ricky Bobby with those hands bud

[@latemodelrestoration]

+smokeum12 Lol! -Landan

[@wiliamsanchez8972]

+Late Model Restoration do you guys sell the MRR M350 wheels for the 2015 mustang??

[@xxXBETESXxx]

It's going to need these so when it's LS swapped the body can handle it

[@captainhowdy9557]

blake shamsrouf if you use a ls you don’t need more support .

[@ezcondition]

SSM was so much better than this bandaid fix. guess i'll have to make the eliminators myself.

[@1800saulm]

Too late, I already tore my torque boxes 😔

[@MrRamonek]

Slow down……