How to install Ninebot Max Installing rear suspension part 2

[@ScootLetsGo]

Here is your chance to WIN Ninebot max front fork suspension. Check out this video on how to enter. kzbin.info/www/bejne/q4fbdZ2BYpJpqdk And good luck. :)

[@cenk82]

Hi bro, i have watched your video for rear suspension and did the same thing... All good but the noise while driving. Did you make a video about how to stop rear fender noise or ay noise after rear suspension installation? Thank you.

[@JuanSanchez-zr1gl]

I just brought one.. I'm thinking of adding the front suspension and the rear. Thank you for the videos man!! 🙏

[@herb94881]

Thanks for showing the process of adding the rear suspension! So hard to find any good videos that do it properly. In your opinion, do you think the suspension is worth it? I only use my nine bot MAX on Main Street roads and was wondering if its worth adding the extra suspensions.

[@ScootLetsGo]

Yeah I couldn’t find any of this on how to install. I was figuring it out as I was installing. In terms on if it’s worth it. This is very much a case of what sort of miles do you do and if there is man cracks and bumps on your route. It will smooth them out. However, it may not be justified if your only going short distance. I like to ride for as long as I can so for me it should help. The only downside for me is that it may reduced my miles per charge. More test is going to be needed. Maybe a external battery would compensate for that.

[@MrToadnic]

Thanks for the help I love that work bench by Ikea, I have the same model. I paid C$10 before Covid and now they sell today for C$15. I think I'm going to get a Sharkset front suspension instead of a Monorim, any thoughts on latest versions? I picked up the Ulip suspension with large brake light and signal lights. It conflicted with the Ninebot Max G30p and would only work when the headlamp was on. And when I turned off the headlamp I was then left with no brake light or signals unless I shut the scooter completely off for 10-20mins. In the end I threw away the Signal/Mode selector and bought a Ulip Signals Lights set and then got both my brake light and signals to work properly (and seperate from each other). Have A Good-Day...eh!!!

[@marioalejandromirandasalaz8254]

Is it advisable to change only the rear suspension alone or improve the front and rear?

[@king11692]

Questions out all the videos you have made for the ninebot max which one would say is the best suspension front and rear and link please very much appreciated I just joined your channel thanks 4 all you do.

[@ScootLetsGo]

I would definetely say the Sharkset front suspension is the best for the front. scootletsgo.com/product/sharkset-front-suspnesion-ninebot-max/ As for the rear suspension, I cannot really let you know what the best is as of yet. I am waiting on the Sharkset rear suspension before I can let everyone know.

[@hellomoto1038]

hola agregando la suspension trasera el scooter queda nivelado o sigue siendo la parte delantera mas alta pr tener la suspension delantera ?

[@VadimSohin]

Hi, is it a Ulip rear & front suspension?

[@luis_naar]

good evening I have a question, I have a scooter based on the ninebot max, so I want to customize it, and add the shock absorber, but I am concerned that mine does not have anything for the lower part of the screw support, My doubt is in the min 4: 05 did you also have to tighten a screw from the bottom to the top ??, or that part with the pressure of the 4 above is enough

[@Wulta84]

I installed the rear suspension today. You actually don't need to disconnect the cables. The only cable I disconnected was the brake light!! -18 ° Celsius where I live so haven't got a chance to try it out yet!!

[@ScootLetsGo]

Thanks man. I disconnected them to make sure that I don’t destroy anything. There was no guide for this out there. But hey. I got 2 videos out of it haha

[@Wulta84]

@@ScootLetsGo Yeah, I followed your video but didn't disconnect. Without your video I wouldn't have figured it out. Keep up the good work ,🙌

[@ScootLetsGo]

Thanks dude :).

[@mynameisweevil]

So did you do it without taking the baseplate off?

[@Wulta84]

@@mynameisweevil No I took the baseplate off so I could see the cables. I wanted to see how long I could pull the cable 👍

[@shaunhansard8211]

First again! Missed last nights. 🤣 Have a good Xmas 🎄!

[@ScootLetsGo]

Great to see you didn’t let me down this time hahaha. Merry Christmas to you too :).

[@amazingmao]

I've watched both parts of your installation process videos and I just realized, there doesn't seem to be any need to actually remove the wheel in order to install the suspension? If I'm understanding it correctly, all it seem to need is a bit more length to the wheel cable, right?

[@timroberts1907]

I agree, and also he shows disconnecting the power cable but did not tell anybody that it will void the warranty, which has the anti-warranty tape.

[@ScootLetsGo]

Hi. Although it’s not necessary to to remove the motor. It makes the job so much easier. In regards to warranty. Any modification you make to the scooter is going to void it. So adding the suspension without taking off the motor will still void the warranty

[@timroberts1907]

@@ScootLetsGo "Any modification you make to the scooter is going to void it. "So adding the suspension without taking off the motor will still void the warranty” This is not completely true. It can always be reversed if you have a warranty issue as long as you do not remove any tape . Don't get me wrong, the services you are doing for the public are appreciated.

[@ScootLetsGo]

There’s always grey areas with warranties. Even here in the UK where we have some of the best consumer laws, a lot of the warranties aren’t worth the paper they are written on. I would usually add a disclaimer either in the video or the description. However in this case I may have forgotten.

[@timroberts1907]

@@ScootLetsGo I want you to understand I'm not trying to discredit anything you're a posting and you are very much appreciate it but people don't know about the anti-warranty tape and it's a shocker when you first find out. The best to you.

[@아빠베어-i3z]

Where can I buy rear suspention? Give me the buylink plz

[@daniel-is6zf]

Oh good I was wondering if I could do this thought I could and now I shall =D

[@ScootLetsGo]

It really does help having some suspension

[@GuacamoleChickenGarlic]

how's it compare with the monorim rear suspension? they both look pretty good, wondering if anyone had any experience?

[@ScootLetsGo]

This is something I do want to buy to compare :)

[@fubene5495]

If monorim has no bearings, its the same shit as this one, maybe more beatiful, but color doesnt improve performance ;)

[@domenicomarotti729]

Hi, my congrats for the video guide, very good job. I'm sorry, but I have a question...Is the backight the original or another aftermarket piece? Thank you in advanced.

[@ScootLetsGo]

Thank you. This backlight is an original Ninebot part. From kickmotion. Their link in the description:)

[@eugenschunda1523]

nice 👌 I've been thinking about buying the rear suspension the whole time! Is it worth ? How is handling?

[@ScootLetsGo]

It seems to handle ok. I haven’t had much chance to play yet. Due to weather being terrible. I will continue to play to see what happens. So far so good :)

[@eugenschunda1523]

@@ScootLetsGo ok thank you 🙏 I would be happy if you could give us feedback again if you know more. My front suspension is coming next week. I took the monorim mx1 with the black spring in front. I can tailor it to me how hard I want it. And my thought was maybe I don't need the back if it doesn't use much or the stability deteriorates

[@ScootLetsGo]

That’s great. I want to get the Monorim variant so that I can compare. If you don’t add anything to the back you will simply be taking away the shock in the front. You still get that harsh feeling on the rear when you go over a bump or curb. With the rear suspension I found it soaks up those little bumps. And makes kerbs more tolerable.

[@AlessandroBaldanzini]

Hi, do you know how long in mm is the suspension? And how lbs is rated the spring? Thanks for the video!

[@ScootLetsGo]

It’s rated for the same weight at the scooter is designed for. So around 100kg. More testing needed. It extended the scooter by about 90mm

[@KillerBii]

Nice video! Will this fit the newer Segway Ninebot Max 30Lp?

[@ScootLetsGo]

I believe it will. :)

[@makey9899]

Does the suspension (front and rear) affects the range or speed in any way?

[@ScootLetsGo]

The speed feels the same. However, I think the range will be affects as it’s adding around another 1kg. Once the weather clears up I will be able to test properly.

[@max7861988]

Where can I buy the suspension from

[@ScootLetsGo]

Please pop me an email at contact@scootlet'sgo.com to get a quote.

[@scentsei8201]

Scoot, Let's Go! - Can you please send your email again? I dont Think there is a ‘ in your email, right? I would also like to know Where i Can buy this, and does it fit on a G30LD, and while i am asking, do you know the difference between LD and LE ? Thank you

[@andreasheler2324]

I live in Germany, is there a license plate holder for this?

[@ScootLetsGo]

I’m working with a supplier that I believe has created a licence plate holder. Scootletsgo.com. Keep your eyes open :)

[@SWED3110]

hey.. i got error code 18 after the installation.. What have I done wrong? Please Help

[@ScootLetsGo]

Please recheck the connecting wires. 18 Wheel Hub Motor Hall is abnormal , Please check the Motor, Control Board & related connections Control Board , wheel Hub Motor

[@rikidiosi5158]

please does this suspension fit on G30 P ?

[@ScootLetsGo]

Sorry I don't know. If it shares the same chassis of the G30, then it should be fine

[@AlexfreDholm]

You dont really show how it work. So is it any good? What is the negative with it?

[@ScootLetsGo]

This was the install video. I’m currently working on showing you more of this in action. It does it’s job. But there needs to be improvements.

[@AlexfreDholm]

@@ScootLetsGo ok thats what i thought but wounder witch :)

[@faithorbeta3825]

Where did u buy that parts? Coz i leave in canada? Pls give me a message thanks

[@ScootLetsGo]

Hey, check out the description. There are links there. :)

[@reichvu8409]

Where can I buy a suspension for the first and second wheel thanks

[@ScootLetsGo]

So you are looking for the fork suspension for the front and the rear suspension? Email me at [e-mail]

[@TonyEffinNguyen]

@@ScootLetsGo how much are they??

[@ScootLetsGo]

Which ones?

[@introspecs6424]

@@ScootLetsGo both

[@ScootLetsGo]

You can check scootletsgo.com :)

[@enayat1655]

Looks like after installing this suspension you cant use the folding feature of the scooter as it cant be hoked to the fender.

[@ScootLetsGo]

It’s ok you can still fold

[@amazingmao]

Since this involves removing the motor wheel itself and unplugging wires, I wonder what kind of negative effect it might have on the water resistance of the scooter itself?

[@ScootLetsGo]

Anytime you make a change that isn’t part of the factory spec you are always at risk of compromising the water resistance. But I have had no problems. And the scooter parts internally are built solid

[@amazingmao]

@@ScootLetsGo Excellent! Good to know Thanks for responding

[@cristianmontielguzman8620]

Hello friend, excellent videos, very good channel about the scooter. Could you upload a video where you explain how to attach a fender mount for the ninebot Max? A hug

[@ScootLetsGo]

Thanks for watching :). Are you referring to the fender support that I had on?

[@cristianmontielguzman8620]

@@ScootLetsGo No, there is a fender support that they sell online, I wanted to know if you can do the tutorial to install it, it is this: www.shift.lt/en/ninebot-max-parts/337-NINEBOT-MAX-G30-MUDGUARD-SUPPORT.html

[@ScootLetsGo]

This is variant of the fender support that I had on. If I pop my rear fender back on again I will do this. :)

[@hexagonmagnetics569]

so you’re getting new motor deck mount

[@ScootLetsGo]

Motor deck mount?

[@hexagonmagnetics569]

Unless you machine your existing deck mount, you'll need to get one with disk brake screws.

[@zr1607]

monorim or sharkset???

[@ScootLetsGo]

I haven’t had Monorim to compare. But the quality of Sharkset is amazing.

[@zr1607]

@@ScootLetsGo i think that quality better and more stability with sharkset..

[@ScootLetsGo]

You can see my comparison between the fork and Sharkset here kzbin.info/www/bejne/rWGtq32mrd1pm9k

[@davidcastillo5733]

Hola donde compro esa suspencion ?

[@ScootLetsGo]

Hey, you can get it here www.aliexpress.com/item/1005001727985314.html?spm=a2g0s.9042311.0.0.2a2a4c4dKypzsd

[@carlosjonasdiazfigueroa7169]

Dove trovo questa suspensione?

[@ScootLetsGo]

You can scootletsgo.com/product/ninebotmaxrearsuspension/ here. :)

[@dbz_etellez5670]

Link de compra?

[@ScootLetsGo]

m.aliexpress.com/item/1005001727985314.html?trace=wwwdetail2mobilesitedetail&spm=a2g0s.9042311.0.0.2a2a4c4dKypzsd

[@count_me_in]

Thnx you are good

[@bex9785]

Like like like 👍🏼

[@hexagonmagnetics569]

now add disk brake to the rear

[@ScootLetsGo]

Waiting for the parts ;)

[@hamzatagl6348]

omg dude why u didnt test it...

[@ScootLetsGo]

I have tested it. Check out my newer videos.

[@hamzatagl6348]

@@ScootLetsGo oh sry maan...

[@ScootLetsGo]

No worries

[@감비아-w6k]

good +

[@ScootLetsGo]

:)

[@fubene5495]

Why humans dont learn nothing from what we have been doing all this years??? Not a single bearing in the whole thing... i have a mountain bike from 1995 and it has bearings installed in all the joints... and its 25 years old!!!!! 25 years have passed, and it still works almost as smooth as the first day... and i have only changed the bearings once.

[@ScootLetsGo]

This suspension on the rear was very cheap. So I wasn’t expecting it so perform that great. But it does the job. I’m waiting for a better rear suspension that I will not have to drill my scooter like Monorims.

[@SuperGiantGeckosLLC]

Just finished my front fork and will have to pass on the rear(looks very retarded)

[@ScootLetsGo]

How did the testing go on the suspension? I agree that the rear suspension doesn’t looks the best but it’s functional. And much cheaper than the Monorim variant

[@SuperGiantGeckosLLC]

@@ScootLetsGo front suspension works but now my steering is a bit stiff.

[@ScootLetsGo]

Did you over tighten?