How to install or replace a PTFE oil seal! VICTOR REINZ oil seal

Рет қаралды 44,236

Күн бұрын

- - - Professional and Fast Oil Seal Assembly! - - -
How to replace a PTFE oil seal? Get here all tips and practical information to replace a leaking oil seal with a new one made by VICTOR REINZ.
The most important types of dynamic seals are oil seals for use on rotating shafts and valve stem seals for reducing the flow of oil through the cylinder head into the combustion chamber. Among conventional oil seals, VICTOR REINZ also offers the new generation of oil seals with PTFE sealing lip.
- - - A Perfect Combination - Oil Seals and PTFE! - - -
The decisive advantages of PTFE technology set new standards in the development of oil seals. Modern engine concepts require solutions for dynamic seals, which are able to withstand the high loads lastingly. Thanks to outstanding properties, PTFE meets these demands - the best prerequisites for series use in modern engines.
- - - For more information visit: - - - www.victorreinz...
- - - oil seal, oil seals, replace oil seal, install oil seal, PTFE, PTFE oil seal, oil seal assembly, leaking oil seal, tips oil seal, remove oil seal, repair oil seal, shaft diameter, car spare parts, PTFE seal, Victor Reinz, Victor Reinz oil seal, car parts, O ring, car repair, sealing leap, sealing ring, O ring assembly, camshaft, crankshaft, dynamic seal, car garage, PTFE technology, install sealing ring, buy oil seal, oil seal leaking, oil seal replacement, oil seal camshaft, oil seal crankshaft, how to install oil seal, how to replace oil seal, - - -

Пікірлер: 17

@lukeg-p943 8 жыл бұрын

A rare gift when a girl loves to do motor vehicle mechanics

@رائدالعراقي-ك5ر 3 жыл бұрын

👍👍👍👍🌷🌷🌷🌸🌸🌸🌹🌹🌹

@j.gtheautotech8455 6 ай бұрын

@1:25 . I was wondering why she added electric tape. Then I realized that’s they cam sprocket’s key way, which does have sharp edges.. good tip!

@playlist55 2 жыл бұрын

bought a Victor Reinz full gasket set last year for a BBC. I like to compare new parts with old parts. Just something I learned the hard way. The rear main seal did not look right. I put it together on the crank and found that the seal lips did not even touch the crank. If I had just put this motor together and put it back in the car, I would have had a massive oil leak. I tried to contact Victor reinz and got NO response. All I could think was how many guys put motors together with this (wrong) seal. I never buy Victor reinz anything anymore. Anyone (whoever put the kit together) can make a mistake. My problem is Victor reinz simply did not care.

@SE45CX 6 жыл бұрын

I feel so sad that no single employee of that company is able to speak. Otherwise we had some clear instructions.

@SE45CX 4 жыл бұрын

Oh yeah, I'd recommend everyone to wait until magically custom tools specific for your vehicle fall out of the sky, before you start working on your vehicle.

@МаксимМ-р7и Жыл бұрын

Ну хоть у кого-то женщины на видео нормальные есть, и руки у которых из нужного места растут😆 А 4 часа ждать, это вообще нельзя двигать ничего делать? А если подъёмник нужен?

@mr.t2585 Жыл бұрын

Do not touch cleaned area with fingers, you could leave fingerprints or grease from the fingers. Engine must be rotated few revolutions with PTFE seals installed to leave sealing material on shaft and after that engine must be turned off for 4 hours in certain temp range. This video is not explaining the right procedure so do not follow this.

@kopronko 6 жыл бұрын

Goood girl ... sadly, not much of such is around in these endtimes before the end in the next decade . And good spiritual music tooo :-) We would be a Perfect team with God's help ...