How To Install Power Commander V Software & Map

[@MrWhitemare]

This has been super helpful 🤟🏻

[@DynojetResearch]

Thank you! 🙌

[@advanceautoparts1769]

I lost the software where can i get it

[@jakeyoguez3199]

Any chance the website will be able to download on MacBooks?

[@Johnny_Thumper]

Is there a community of people sharing maps anywhere?

[@christopherdekonstrukt444]

I originally did this before I installed the dynojet on the bike but that was 4 years ago. Want to change the tunes because of an exhaust modification.

[@traecrawford]

Lets say I have a flashed ECU and I do not want DJ to interfere with it. But I want a second tune on DJ with a map switch how do I go about having it essentially "do nothing" until I hit the switch to swap tunes to my nitrous tune ?

[@christopherdekonstrukt444]

I'm assuming the USB cable provides power to the device. I did this once however it wasn't installed on the bike at that time. Now it is so I'll take the laptop to the device. The Commander v is on top of the bike's ECU under the seat.

[@dynamicadrenalin]

Helpful video. I assume this is the same software for PC6? PC5 (like this video) is the only software I can find on the website. Also I think this is the only time in history I've heard mouse buttons manipulated with a closed fist :D

[@okcrwestbrookfan0]

if i have a custom tune and exhaust can i still use?

[@anwarmurad3439]

Hey 🤙🏽! I have the PC3 USB and wonder if I can load map without disconnecting it from the bike… Thinking of using s laptop and connect directly to it with bike shut of ofcourse

[@danieloconnell4225]

Hey there; love the PC V - got a great tune for it for my Triumph out of Europe. Going to be installing a camshaft soon which means my ride will need a new tune to get the most out of it. This looks pretty straight forward, but when you upload the map (looking at around the 4:18 mark on the video), the tech has the 'fuel' tab highlighted. The tune I've got coming will have ignition mapping as well as fueling - do I have to highlight or click anything in particular, or will the software automatically upload both the fueling and ignition map as soon as I hit 'send'? Do I have to highlight fueling, hit send, then highlight ignition, and hit send (as in hit 'send map' two separate times) or will 'send map' send both the fueling and ignition map simultaneously no matter which is highlighted in the software? Maybe an odd question!

[@Okj17]

Should I use regular or premium gas?

[@04tsxpower]

Why not just do vehicle selection right from the start? Way easier process

[@neilwest9345]

does pcv come with the auto tune as standard you didnt talk about this? I have a 2001 cbr600f4i with a stubby sc engineering exhaust that's causing either fueling or back pressure issues when pulling away i lose power then over 2k kicks back in again. any suggestions cheers

[@DynojetResearch]

Neil, if you contact us at [e-mail], we can help with this. Thanks!

[@dshiznit148]

bro i have a 03 f4i was running perfect before i put on the pcv then after install any input on the throttle makes the bike stall. the map upload doesnt seem to effect this at all.

[@DynojetResearch]

@@dshiznit148 We're sorry you've had this experience... if you email us at [e-mail], we're happy to help you out to make sure your bike runs well.

[@Ki777UMiNATii]

Bit of an oddity happening. I download an 07 honda cb900f tune and it's a .p6m file. File type isn't in the drop down thus won't open it i guess? Filtered for full exhaust ticked the only "full exhaust" option available. P6m.. After that was a no go I went back to check tunes without filtering and there was another full exhaust tune. Downloaded and at least it was a pvm but now it won't let me "send map" to the unit (pre install). No options highlighted except open map and save map.

[@DynojetResearch]

Hello! Please reach out to our technicians at [e-mail] or by calling 1-800-992-4993 and they will get you pointed in the right direction.

[@PepperRed]

Not sure if i’ll get a reply this late. But i recently got a used bike that came with a PCV and im trying to reflash it with a different tune. it wont let me search and download the tunes for my bike. I made an account already

[@motorxpromotocare]

Just bought a pcv for a Versys 1000 and you don’t have any maps to this bike ?

[@kevinhumphrey932]

If I were to purchase a used PC5 off of Ebay that is used can I still get access to the there website so I can install different software and maps thank you

[@DynojetResearch]

Yes, with a used Power Commander V (that matches your vehicle), you're able to download our software and maps. Please note that you will need a Windows computer to download Power Core software.

[@Champion2Manager]

Thanks for clarifying how the software works. Now, can you tel me why there aren’t a lot of maps for a specific type of bike ? And where can we get more maps for let’s say a akrapovic full exhaust system and performance air filter ?

[@DynojetResearch]

You can contact us at [e-mail] and we'll help you find the right map.

[@ctone12]

This seems really cool, unfortunately there aren't any tune maps on the website for a 2015 rmz 250. So if I got this, I guess I would have to tune it myself?

[@DynojetResearch]

Hello, we only have the PCFC available for your model dirt bike, linked below: www.dynojet.com/power-commander-fc-for-suzuki-rmz250-fc20020/

[@amrshaarawy9187]

can a power commander v remove restrction on ECU ?

[@DynojetResearch]

What parameter are you looking to modify in your ECU?

[@airelee]

When you are uploading the new map, does the bike have to be turned off?

[@trollgemologist]

If I buy a new PC V can I download the map for the mods I have on my bike before installing it to avoid getting a computer close to my bike?

[@DynojetResearch]

J, you can download maps to the device without it being connected to the bike.

[@MikeSmith-qs2nr]

Great video .. Just following your steps it has the end confirmation..ie 2005 zx636 and info..BUT does not show and live feed data.. do you think I have installed it incorrectly.. the power commander was used and from the same model bike

[@MikeSmith-qs2nr]

Just thinking it could be the use as it definitely showed map details

[@DynojetResearch]

Hello, Mike! Please reach out to our technicians at [e-mail] or at 1-800-99-4993 and they can point you in the right direction.

[@alexlihvideo1437]

Help. If I remove the usb cord, the power to the commander 5 disappears. The motorcycle stalls. What is the reason? HONDA 954 2003

[@DynojetResearch]

This generally means the PCV may have a bad ground. Please check your ground wire to the Power Commander V. If you need more technical assistance, please reach out to us at [e-mail].

[@alexlihvideo1437]

@@DynojetResearch thanks

[@summeradventures5868]

I have an 07 GSXR 600 with a Dynojet PC. I use stock air filters. I put on an M4 Street Slayer slip-on. I've done nothing else besides that. I logged into your site. You have a profile for an 07 GSXR 600 M4 slip-on with stock or aftermarket filter. That should be good, correct? That should provide the best Fuel/Air ratio for my bike? I don't think I need a full, custom dyno.

[@DynojetResearch]

Please select a configuration with similar aftermarket components. If you need to create a Custom Map you have two ways to do this. You can install the AutoTune accessory kit for the PCV, this will enable you to fine tune your bike while you ride or take your bike to a Certified Dyno Tuning Center. Please reach out to us if you have any further questions. [e-mail]

[@michaelmitchell5909]

I'm switching over toa carb conversion

[@DynojetResearch]

We make jet kits in that case!

[@michaelmitchell5909]

@@DynojetResearch ...im just not that computer savvy and the powervision has gone up in price over 200$ which stinks...they used to be 500$ on jnp cycles now 700. Cost 1000 for a good tuner on a dynamometer and a tune liscence so it's gettimg to be crazy money anymore to have a decent running bike......just my dumb ass opinions....

[@jussbraapin1159]

hey when i download the map it dont downlaod as a .pvm file so i cant load it onto my pcv app how can i fix this?

[@DynojetResearch]

Hello, please reach out to our technical support at [e-mail] or at 1-800-992-4993.

[@haydenskaggs668]

Why there, I have a 2006 Suzuki LTR 450 an I bought it about 3 years ago an it had a PC3 it stopped working on me an my bike is running so weird. I want to upgrade to a PCV but I don’t know if that will mess it up or not. I don’t know what’s done to the engine. Or what tune he had on it so I am stuck on what to do an would to love to here from someone like you. I’m pretty sure it has a 516cc set up in it because it was way faster then a stock one, I just don’t know what to do, if you would text me back I would appreciate it so so much an thank you!

[@DynojetResearch]

Hello! Please reach out to our technicians at [e-mail] and they will point you in the right direction.

[@poo4731]

so you just add the map to the power commander and its good to go? also is there no klx300 maps?

[@DynojetResearch]

Depending on your configuration, our tunes can get you dialed in or close to it. If you wish to finely tune your vehicle or have a custom set-up, you can visit an authorized Dyno Tuning center for custom tuning. Our tune library exists here: www.dynojet.com/tunes And if you wish to request a tune, you can do so here: www.dynojet.com/support-form

[@davidnewman7088]

This is great.. says in info not to load pc3 maps.. Is there a way around or to get values out of someones map to put in my pc5? thanks.. remus slip on and K&N with 08K1200s

[@DynojetResearch]

David, please email us at [e-mail] and we can help you with this.

[@joejohnson8490]

I have a 2014 Yamaha Raider s, I just installed a freedom performance shortcut rate is exhaust and a PCV Commander and K&N air filter. The only map that I see on Dino's s website is set up for a Vance and Hine Big Radius 2-2 exhaust which is similar to the freedom performance. Will that map work?

[@DynojetResearch]

If you would like to request a tune, please fill out our new tune request form which captures all of the necessary information to supply you with a tune. www.dynojet.com/support-form

[@brianhay4024]

Does not work. The additional maps (tunes) from website download as .p6m file types. The PCV software is looking for a .pvm filetype so cannot identify the downloaded map. In the video the host downloads a pvm.file type. I have no idea what's going on. Not a good way to start with new software.

[@DynojetResearch]

Please reach out to our technicians at 1-800-992-4993 to help you through the issue.

[@walkastray8354]

We're can I find the scripts for a power commander 5 for a 2022 suzuki gsxr750 bc I looked it up in ur website and says discontinued and no tunes ?

[@Macedoniandad]

I cannot find a map for my 2002 Honda VTX1800 with cobra speedster slashdown exhaust and stock air filter! What do I do???

[@DynojetResearch]

If you cannot find a tune on our website, please fill out our new tune request form which captures all of the necessary information to supply you with a tune. www.dynojet.com/support-form

[@rickeyhenry1951]

Sucks they don't make a map for fmf exhaust

[@DynojetResearch]

If you would like to request a tune, please fill out our new tune request form which captures all of the necessary information to supply you with a tune. www.dynojet.com/support-form

[@CasebyCaseIntuitive]

So after several tunes and fine tunes I’ve accepted my trims to tune towards my target afr’s- for a race weekend do you think I should turn my auto tune off so that it will not try and adjust while I’m racing. I’m looking for consistency and predictability. Sometimes I think my auto tune is working against me due to changing weather conditions over the course of several hours and the adjustments it’s making causing inconsistency. What are your thoughts

[@DynojetResearch]

Please feel free to reach out to our technicians at [e-mail] and they will be able to make recommendations.

[@bilalmughal7825]

Hi guys. I need a map for gen 2 haybusa 2013 model for pc5, i have brocks full system dual exhaust and k&n racing airfilter on it

[@DynojetResearch]

Hello! Please reach out to our technical support at [e-mail] and they will point you in the right direction.

[@potro1080]

Will there be a Mac version of the software in the future?

[@DynojetResearch]

It's not in our plans right now, but should we develop something for Mac, we will announce it. For now, the Power Commander V software is PC only.

[@ka-juanjacobs3485]

Don’t see a tune for 07 busa running brocks?

[@DynojetResearch]

Hey there, Ka-Juan. Please contact us at [e-mail] for a request!

[@AS-up7cw]

dónde descargo el manual de instalación de power Comander V para mt03?

[@dalengwyr]

I know this is old, and the PC5 is outdated, but, how do I access my map(s) that are currently on my bike? hook a laptop to it?

[@gostfalcon]

You should be able to connect a usb to micro usb from laptop to power commander side

[@stopii7836]

so i have gsxr 600 2006 , stock air filter, akrapović slip on exhaust, with stock downpipe but i deleted my catalytic converter, what map should i choose? is this the correct choice? (Akrapovic slip-on2 open exhaust (S-S6SO5-TT), Stock or aftermarket air filter) and do i have to remove those flaps on my exhaust? please help...

[@DynojetResearch]

Hello! Please contact us at [e-mail] so that we can help you out with your inquiry.

[@MrDoomzy]

I installed the tune onto my powercommander for my 2015 triumph Daytona 675r, would it be beneficial if I went to a dynojet facility and got it dyno’d??

[@DynojetResearch]

If you would like to fine tune your motorcycle, we definitely recommend visiting a local Dynojet-Authorized dealer.

[@uniteddrones7626]

When installing an auto tuner with the pc5 don’t you need to take off the stock map sensor? And also remove the stock exhaust sensor. Just unplug? Leave plugged in? Put a resistor inline? I’m unsure

[@jonballen1550]

Are the stock power commander maps better than stock ecu, or are they the same?

[@DynojetResearch]

Our stock map is an improvement over the stock ECU. There are gains to be had with just a stock exhaust by using the Power Commander V and the correct map.

[@vicmensa2002]

Can you use CRF450x maps for the crf450L??

[@northernninjarunner5506]

Bought the PC5 for my FZ1 sadly no maps for my bike

[@DynojetResearch]

Hey there! We actually do have a map for you. What is your email address?

[@mikahfathers2382]

Hey Dynojet, I have a 2020 Kawasaki ninja 650 and i got a two brothers full system. and the latest PCV for my bike and for the year it says the only maps available are for the stock system. Since the exhuast fits 2017-2020 i looked at 2019 and there was a map and thats the one im using right now. is that the best way to go about it since there isnt a map for two brothers 2020?

[@DynojetResearch]

Mikah, you can email [e-mail] and we can help you out with this.

[@JoseMartinez-h7w4v]

Hola q tal disculpe tengo tengo el power commander V ya está instalado en una moto grom 125 20019 q cogidos debo ponerle para q corra mas

[@timothyandrewgalable]

I've just installed this on a 2003 vtx1800 I stall went great super easy I didn't see an option for stock exhaust missing baffles lol I also have a hypercharger should I just use the closest tune with a hypercharger installed?

[@DynojetResearch]

Please contact our technical support at [e-mail].

[@josiahj1033]

i went to get a map downloaded and I can only get a map for a 2016 can am outlander 850 even though I have a 2020. Does anyone know if the 2016 tune will work for a 2020. or if I can get a 2020 map somewhere?

[@DynojetResearch]

If you would like to request a tune, please fill out our new tune request form which captures all of the necessary information to supply you with a tune. www.dynojet.com/support-form

[@VrbasMiko]

I just got a new power commander 5 for my honda vfr 800 2009. I installed but the bike won't start. What do I need to do to fix this problem?

[@DynojetResearch]

Please reach out to tech support at [e-mail] or on our Toll Free line: 1-800-992-4993.

[@chuchu2301]

Hi I have a power commander 5 with a custom tune made for my 2011 triumph daytona 675, however I did a stupid thing by updating the firmware - PCV Firmware Version: 1.14.2 Last Update: 23/01/2017. After installing the bike is now running poorly and a strong smell of burnt fuel and a sound of engine knocking at low gears rolling off throttle. The idle seems messed up also, when blipping the throttle in neutral, there is a backfire..Any ideas ? Thanks in advance

[@DynojetResearch]

Please send us an email at [e-mail] and we can help you.

[@leoanrdopizarro6562]

do you know how can i map for 2006 gsxr 600

[@raspberryhippo]

Hey there, I just purchased a used 2017 Kawasaki Z650 that has a full titanium Akrapovic exhaust installed. The guy I bought it from purchased a power commander V for it but never installed it because he said it had no tune to download. I have looked and he seems to be right, there does not seem to be a tune for that particular exhaust. I have noticed some black smoke when reving it up in the morning so I am assuming that it is running a little rich due to the upgrades he has done to it. How would I go about getting or making a tune for my particular exhaust? If it is possible to make your own tune on this that is. Thanks for any help you may offer.

[@DynojetResearch]

If there is not a map listed for your exact configuration, select a map with similar aftermarket components. If we do not have your exact exhaust in a pre-developed map. If you need to create a Custom Map you have two ways to do this. You can install the AutoTune accessory Kit for the PCV, this will enable you to fine-tune your bike while you ride or take your bike to a Certified Dyno Tuning Center. Links Below. AT-200 AutoTune Kit for PCV: www.dynojet.com/autotune-power-commander-v-single-channel-kit-at-200/ OR The listings for Tuning Centers in your area can be found located on this page on our website: www.dynojet.com/dyno-tunings-center/motorcycle-dyno-center/

[@tecate2127]

I have an 2006 LTR 450 and I can't find a map for a Dasa full exhaust, Fuel customs intake, and the power commander 5

[@DynojetResearch]

Justin, email us at [e-mail] and we can help.

[@footsmakenzyhellothr]

I have a 2018 Honda CBR650F. The carburetor trumpets are restricted on this model so if unrestricted, does the power commander have the option for this mod?

[@DynojetResearch]

Rino, we do not have a predeveloped tune for that setup, but the Power Commander has enough adjustment to compensate.

[@2tubeguitar]

So… at the end of the day the Power Commander is just a tool to transfer pre-defined maps? It is not designed to allow the customers to customize their veicules as they want/need?

[@joshssauce]

You can customize it but I think it needs to be dyno tuned in order to do that. Not sure how the autotune works tbh, I'm still confused about that.

[@Ganzonx1]

Just be aware that this won't work well with new Honda's since they do not provide the O2 sensor delete in Canada.

[@fastrunlogistics3560]

Will it work on a 2012 wildcat 1000 h.o?

[@samtarariverasanchez59]

Do u guys have a map for the 2v 181 takegawa

[@DynojetResearch]

Hi there, please reach out to our technical support at [e-mail] and they will be able to point you in the right direction.

[@toolinedc]

Stupid question maybe but is there a way to do it with my phone ?

[@DynojetResearch]

You won't be able to do this through your phone. You'll need a PC computer to install the software.

[@toolinedc]

@@DynojetResearch it's all right thanks, did it on a computer ! Quick question ; since i plugged in the pcv in my 2020 honda grom, i don't have rpms ? Everything else worka besides that. Do you know what it could be ? You guys had any report on that ? I have to check everything back again but yeah.. no rpms...

[@DynojetResearch]

Send us an email ([e-mail]) and we can help you out.

[@durhamnative3755]

Any map yet for the 2022 hayabusa?

[@DynojetResearch]

Please use our tune request form to send a request to our technicians for a tune! www.dynojet.com/support-form

[@carolreddy3738]

Do I have to take a computer to my bike, or can I remove the PC from the bike and connect to my computer in my office.

[@DynojetResearch]

To upload a tune to the PCV, you can connect to the PC only and then connect to the motorcycle afterwards.

[@duaneb3096]

Funny, I've done all this but I can't for the life of me get my MotoGuzzi 750ie running good at all. I've had long conversations with the engineers at Dynojet on it and tried several things but in the end after several weeks of trying, I just took it off and threw it back in the box. I'd love to get my fuel injection to run a bit less lean for more oomf but it may not happen for my moto.

[@ochoalokks]

Same

[@ochoalokks]

But I got a yfz450r

[@sethobringer92]

The software isnt there anymore ??

[@DynojetResearch]

Please reach out to our technical support at [e-mail] and they will point you in the right direction.

[@J_Lloyd23]

There's still no aftermarket maps for my 2020 ninja 650

[@DynojetResearch]

If you would like to request a tune, please fill out our new tune request form which captures all of the necessary information to supply you with a tune. www.dynojet.com/support-form

[@420kayoe420]

would u guys have maps for empire industries duel exhaust? or anything similar on yamaha raptor 700r 2020?

[@DynojetResearch]

If you would like to request a tune, please fill out our new tune request form which captures all of the necessary information to supply you with a tune. www.dynojet.com/support-form

[@420kayoe420]

@@DynojetResearch thank you one more question, would it still work if u dont have a laptop and i send a map thru my pc to commander then hook it up to my atv?

[@efrainmoreno6964]

What would be the best map to download on a yfz 450r 2021 with a slip on yoshimura exhaust with a power commander V 5 ?

[@DynojetResearch]

Please reach out to our technicians at [e-mail] so that they can get you set-up with a tune for your motorcycle!

[@tvmotocrazy5178]

can I get one for mac version?

[@DynojetResearch]

Hello, you will need to either use a Windows computer or be running Windows on your Mac.

[@matthewschroeder495]

When I plug laptop into bike, with map loaded. The pc5 has a green light. But I cannot do anything other than save map, or open map. There’s the get map, and send map options, but I can’t click them. I’ve done this before on my old bike, and it worked fine.

[@DynojetResearch]

Matthew, please contact us at [e-mail] and we can help you out.

[@matthewschroeder495]

Dynojet Research, Inc. ok I will. Thank you for the quick response

[@MrZiko-nf9hx]

Does the tune for fz 07 2016 work for a mt 07 2016? :)

[@DynojetResearch]

Please reach out to our tech support at [e-mail] and they will point you in the right direction for a tune for your motorcycle.

[@republicofu.s9642]

What would you select if you had an unbranded exhaust for 2020 grom with k&n air filter?

[@DynojetResearch]

You can choose a MAP that has similar aftermarket components for a good base line. For finer tuning you can visit your local Dyno Tuning center. If you would like to request a tune, please fill out our new tune request form which captures all of the necessary information to supply you with a tune. www.dynojet.com/support-form

[@paulgarcia6257]

Looking into the new power vision 3 for my 13’ xmr 1000 as it’s just seems much easier to install but all I find are the power commander units. Also hear the vision 3 are better thanks.

[@DynojetResearch]

Paul, we do not have a Power Vision 3 that is compatible with the 2013 XMR 1000. The PV3 is a newer product than the Power Commander, so the fitments are more for newer vehicles. The Power Commander will definitely give you increased performance, though. If you have questions about your specific setup, we're happy to answer them at [e-mail].

[@reeve7929]

So what if i have a different exhaust and a different air filter and want more power even if my MPG goes down?

[@DynojetResearch]

We can help you with that... please email us at [e-mail].

[@benjo5685]

Hi there! I tried to download a map for my bike but the file can’t be opened. It says it’s in a PVM format. Please help thanks!

[@DynojetResearch]

Send us an email at [e-mail] and we can help you out.

[@xBLVCKLOTUSx]

is it normal to have the check engine light on while using a power commander? im sorry if this is a repeated question, i didnt see one below

[@DynojetResearch]

If you email us at [e-mail], we can help you with that.

[@jalisco872]

What if my device isn’t being read by the power commander software ?

[@DynojetResearch]

Leonardo, email us at [e-mail] and we'll help you troubleshoot this.

[@dereckrodriguez9688]

What plug do you use to connect to computer

[@jimd7241]

Hello.. I have a PC3 USB What number map would be the closet for 08 1800F Honda Vtx V&H Staggered exhaust standard baffles....Hyper Charger Air Intake& Par valve removed...Thanks

[@DynojetResearch]

Jim, you can contact us at [e-mail] and we can help you out. Thanks!

[@jimd7241]

@@DynojetResearch okay just emailed you...my unit is OLD..lol model#pc3 122-411 I couldn't make the serial number out..Will my request go thru without the serial number? I completed the form without the serial # I hope it goes thru Thanks

[@DynojetResearch]

We should be able to handle it, and we'll reach out if we need more info.

[@jimd7241]

@@DynojetResearch Tony email me ans said to try/use map 122-002 That map says without baffles,But I have baffles...But We will give it a try...Thanks

[@6.0hhh]

Can you all add for a 2017 Roadmaster Tab performance slip ons with llyodz intake?

[@DynojetResearch]

Shane, contact us at [e-mail] and we can help you out.

[@donovanschoor1473]

how can i get a map made for my specific setup if none already exists?

[@DynojetResearch]

Donovan, email us at [e-mail] and we can help.

[@jeremymcdonald6961]

Does this software play nice with a Mac?

[@DynojetResearch]

For now, the Power Commander V software is PC-based only. If you run Windows on the Mac you can utilize it.

[@z800kawasaki9]

Hellow I want to ask there are no any full system akrapovid map on z800 2015 model , so where can I download the map form Dynojet??

[@z800kawasaki9]

Really need help

[@DynojetResearch]

You can download them here: www.dynojet.com/tunes, or you can contact [e-mail] if you need assistance.

[@z800kawasaki9]

@@DynojetResearch there are only HP Racing and two brother exhaust map. Got other map like full system akrapovid and aftermarket BMC air filter map??

[@DynojetResearch]

@@z800kawasaki9 If you email us at [e-mail], we can help you.

[@A.Dude.]

Sadly Dynojet does not respond in the comment section to the posted questions... That was the whole point of watching this video, doing a bit of research on the matter before spending an arm and a leg on their gadgets... All answers sound like "send us an email"... Really???

[@DynojetResearch]

Our technical support has a queue of customers to respond to, hence why we direct them. Please let us know your questions and we will get back to you ASAP!

[@jakech12345]

How do you add gauges to the screen? Mine just has tps and rpm. When I click on add gauge it says none. And no option to select afr or duty

[@DynojetResearch]

You can right click on one of the blank gauges and pick the channel that you want to display.

[@jakech12345]

@@DynojetResearch that's what I figured but it only shows rpm and throttle. I did the update to the firmware in case that was the issue but its the same. Now does the pc need to be plugged in to work? That's the only other thing I can think of. I was just making a basemap for my turbo zx10r sonic didn't have it plugged in as the bike is in storage.

[@DynojetResearch]

Yes, it needs to be connected to a device to know what channels can show up.

[@DS-nw4eq]

Wow... requires a Windows device... but they don't mention this in the marketing BS. Thanks guys. How long has this product been out now? I'm the new proud owner of a useless Power Commander. Awesome.

[@TJ-HBMCC]

How is it useless, borrow or buy a cheap laptop or visit a dynojet specialist to get it tuned on the dyno

[@DS-nw4eq]

@@TJ-HBMCC Duh, just buy another product or service to make the first one work. Oh, you’re right.

[@TJ-HBMCC]

@@DS-nw4eq I honestly don't know what you expect, it's not their fault you don't own a windows device or want to visit a dynojet shop to get it dialed in, maybe look into products before you buy them next time

[@DS-nw4eq]

@@TJ-HBMCC You can’t read, and what I mean by that is your comprehension skills aren’t very good. Unfortunately, comprehension is the important part.

[@Ag1mAm]

ever thought your mac is the useless part here?

[@dandamanh]

How do I test my pcv to make sure everything is connected and working properly before I download my new tune?

[@DynojetResearch]

Dan, connecting to the software is the best way to do this. By looking at the software when the bike is running, you can see if the RPM and throttle position is displaying correctly. If so, you are good to go.

[@dandamanh]

Dynojet Research, Inc. awesome, thank you for the quick reply.

[@cuahangxemayanhphi2349]

My destop: cpu pentium G5400+ ram 8Gb + Ssd 120gb can run this software good? Tks for answer

[@DynojetResearch]

Yes, so long as you're running Windows, you should be fine to run the Power Commander software. Please let us know if you run into issues.

[@jacobwonder6735]

@@DynojetResearch Your website gives NO mention about the required OS to run the software, every Mac user has to download, extract it, just to find out Mac is not supported. So I need to install windows, or borrow a computer... What windows versions are supported? 7, 10, Vista, XP?

[@DynojetResearch]

@@jacobwonder6735 Jacob, we're sorry about this experience and thank you for that feedback. We'll try to make it more evident that our software only runs on PC, not iOS. This software will work on Windows XP and up.

[@roninmantis7584]

And when it doesn't retrieve a map when connected?

[@DynojetResearch]

Try using the "Get Map" function and check to make sure the USB cable and port are working properly. You can also try restoring the default layout by going to View > Layout > Restore Default Layout. Let us know if this helps!

[@dereckrodriguez9688]

Can you do this with a MacBook?

[@DynojetResearch]

Only if your Mac is running Windows.

[@jeffreyhinman1397]

When did the newest software and firmware come out for the pcv, and secondary fuel module? Anything in last couple years? They use to have a date when they were released.

[@DynojetResearch]

Jeffrey, it's been a couple years since we've had software and firmware updates for those. Are you having issues, or do you have any questions?

[@jeffreyhinman1397]

@@DynojetResearch just wondering if there are any substantial changes in firmware, software that has enabled features other previous versions don’t have. I bought all my modules, pcv, sfm, autotune and quickshifter all new from motomummy back in 2014-15. I could check the firmware version numbers just to see if they’re current. How come you don’t make base maps for the secondary fuel module? Awhile back I was told just to use the same map that’s in the pcv in the secondary module and it’ll tune to where it needs to be. I was then corrected a year or so later that it’s not ok to run the same off the shelf map in bother modules. I don’t have any issues though I just zeroed out the secondary module so it’ll run stock tune. I’m pretty handy with these. I set it all up on gear dependent maps with an engine hoist on the rear subframe 😊. That was years ago runs like a top though 2007 gsxr 750. I’d like a secondary map as well eventually was told one wasn’t needed 🤷‍♂️ I am aware that the same firmware versions have to be ran on both modules, it can’t be two different versions is what I’ve been told.

[@jeffreyhinman1397]

@@DynojetResearch I really want the pod 300, so I can tune even further with a data log. But for years the software has been flawless for me and I’ve accustomed myself to it.

[@DynojetResearch]

@@jeffreyhinman1397 Jeffrey, can you please contact us at [e-mail]? We'll make sure you have what you need and answer all questions about the firmware and the POD-300, which is a pretty popular item!

[@spawnmarshall5326]

Do I have to plug up at the same time as im tuning the Commander,.. what if I don have a computer in my garage?. Are can I time it on the computer than plug an play..

[@DynojetResearch]

You connect the Power Commander prior to tuning your bike. This way, you can download a tune at your computer, wherever it is.

[@fahadk4191]

Dynojet Research, Inc. this is not working for me, the commander is not hooked up to the motorcycle and i have tried to load the maps using the cable, but all i see are dashes where the 0 zeros are supposed to be, and don't seem connected even though i can see a status light on the pc

[@DynojetResearch]

You can email [e-mail] and we'll guide you through this.

[@allenbeland493]

Is there a mac version of the software?

[@DynojetResearch]

No, Allen. This software is Windows only.

[@wb4514]

Is there software available for a mac ?

[@DynojetResearch]

You will need a Windows based desktop or latop computer to utilize the software for these products. Apple/Mac/tablets/ chrome/mac books will not work.

[@wb4514]

@@DynojetResearch Will I be able to send it back to Fuel Moto (where I bought it),for reprogramming?

[@DynojetResearch]

@@wb4514 Please contact Fuel Moto to see if this option would be possible.

[@toddmerriott6901]

Is this good for a 2020 raptor with stock exhaust?

[@DynojetResearch]

Yes, it is, Todd! We actually just showed how to install one on a Raptor: kzbin.info/www/bejne/noXRcpiZltGKpqs If you have questions, you can contact us at [e-mail].

[@autobrasher1942]

@@DynojetResearch what about a 2017 700r se with dual big gun exhaust??! I need help

[@DynojetResearch]

@@autobrasher1942 Yes, here's the Power Commander V for that model: www.dynojet.com/power-commander-v-for-2015-2017-yamaha-raptor-22-074/. Please email us at [e-mail] and we're happy to answer any questions. Thanks!

[@joshbeck289]

How do I get this too work on my chrome book wtf

[@DynojetResearch]

To run our software, you'll need a Windows computer, Josh.

[@Alex-pz8ks]

3 Months ago, but you can install a windows emulator or something to run Windows in a window on your mac.. Windows-ception..

[@trannguyenhuunghi7278]

🇻🇳🤔

[@RelaxingVibes202]

Is it possible to load a map for poor performance

[@DynojetResearch]

Just out of curiosity, why?

[@RelaxingVibes202]

@@DynojetResearch I'm rebuilding a ZX10R I did a frame swap.It has stage 1 performance.Tuned throttle response. I'm kinda nervous

[@DynojetResearch]

If you have questions, you can contact us at [e-mail], Bjorn.

[@itsdoncartagena6485]

Do you have software for mac?

[@DynojetResearch]

There is no Mac version. Windows only.

[@itsdoncartagena6485]

Also how come you guys only have 2 maps for the 2015 gsxs 750 and bought are for stock exhaust and aitfilter

[@DynojetResearch]

We're developing new maps all the time. You can also contact us at [e-mail] to find the best tune for you.