How to Pcv Power commander 5 software and Transfering maps. All u need to know Raptor 700 2006 -2021

[@poorwhiteboy6521]

Very simple. But very helpful thank you.

[@201thenoob]

Your AWESOME on the explanation!!!! Thank you sir!🤙

[@joeciarcia1345]

Have you seen or reviewed Alba Racing’s new exhaust system and ECU reflash for the ‘15+ raptors?

[@969Garage]

Have you ever tested yoshimura rs2 full on the dyno? If so how do they compare to others

[@EddieTorresmusic]

Hello Mr Cuervo, I’m needing a map for my 2011 Yamaha Vstar 950 Tourer bike. It has Vance & Hines exhaust full pipes. I have the the Dynojet Power Commander installed already. Please let me know and pricing or link to purchase. Thank You!

[@gerhardlarsen7352]

A question on autotune: If the autotune monitors and changes the AFR automatically while you ride to the best AFTR at the time, why would you need to make a map from this and reflash(reprogram?) your PCV? Would not changes in temp, altitude etc be changed by the autotune on the fly, always making it the best?

[@theslacker29ify]

You could make a map for power and economy by changing the AF ratio map and then save the maps after that You can add a switch to have the power commander switch between the two maps.

[@christiongreen7385]

Great vid i just installed the software! I have a fci Intake, big gun eco exhaust, and have my PCV on my 2020 raptor 700R. I was wondering how could I contact you or someone you know to get a map for it?

[@mnricar7]

Great question I was about to ask the same thing

[@jackgelso6285]

Should the ignition stay at 0 if it’s ready

[@randysmith8604]

Where are you located? I would like my quad tuned with pcv?

[@saitamakayoe6400]

So if u dont have a laptop can you add the map on ur pc then hook it up on ur atv? Will it still run that map?

[@jakequick701]

I need help tuning my 2018 Yamaha raptor 700r with dual empire and power commander FC plz lmk

[@trickflippers5035]

What’s up love the videos. I have a raptor 700 2007. I have a big gun evo r slip on exhaust, with k&n air filter kit and no air box lid.

[@420kayoe420]

thanks for the video it was very helpful i had a question would it still work if u dont have a laptop and i send a map thru my pc to commander then hook it up to my atv? and also dynojet does not have a map for my exhaust i believe u said u sell maps? what is your website to buy one i have a yamaha raptor 700r se 2020 and i have a air filter Airbox lid removed no stock air filter with duel empire industries exhaust would u have a map for that?

[@monicagarcia8973]

I have a 05 Road king with a screaming eagle 96 big bore kit with se 223 cams and cobra true duals and cobra neighbor haters and need a map. Could you please help

[@fftruckrepair1415]

Do i need a power comander just to at a stage 2 hot cam

[@christiongreen7385]

Do you think doing a dyno with a slip-on exhaust would be worth it? I have a PCV and (FCI) fuel customs intake installed as well

[@MrCuervoRacing]

If you are going to leave it with those mods and that is it, then yeah, see where the tune up is at and be confident in it.

[@christiongreen7385]

MrCuervoRacing thanks for the response!!! Great vids btw I’m always watching

[@preyprey6190]

@@christiongreen7385 hey do you have the map for that?

[@whyteboi0011]

Would you have to adjust the throttle positioning sensor every time you download a map

[@MrCuervoRacing]

No

[@MultiBlotter]

I dont have any emails with maps to download back it up

[@alexhendrickson5528]

how do i plug into the power commander from my desktop to my bike?

[@piotrtomaszek5316]

Hi do you make maps for KFX 450R? If so can you help me out with a new map for my quad? Thanks

[@thunt6282]

What would a 5mm crank and a 11.5:1 piston put down ?

[@xxthewolfxx]

Keep your bike at the big 3 level unless you have big boy money it gets expensive after that.10 to 20k range.

[@Gannon69]

Very helpful 👍🏼

[@yxiscatti]

Great video as allways, very detailed, and helpul. I dont live in USA so I cant buy from you a Map, I have PCV with Ignition and Autotune Module, Empire Single Full Exhaust, Prodesign Intake kit with foam filter, HC3 and +3TB. Wich Air Fuel target I should set? stock is 13.2 in whole map but from 60% Throttle and 4000RPM its 13.0. I read a LOT on Raptorforum, looking online, and cant find the final answer, some said 13.5 its the best power, others said its thats its too lean, some said 12.4 to 12.8 for my set up and Im confused, the nearest Dyno form me is about 1000KM thats why I purchased the Autotune but just need to know wich is the best AF Target. I will really appreciate your help. By the way Im very thankfull to you because I saw all your videos and do all the mods by my own with good success, so Big Thank You!!!

[@MrCuervoRacing]

mapping is by email,. ' these motor do not like to be below 13.0/, 13.0-13.5 @ Wot is safe for pump gas,.

[@yxiscatti]

@@MrCuervoRacing great! Thank you very much. I want to contact you thru email, can you tell me your email? Thank you.

[@xxthewolfxx]

Been awhile since you’ve uploaded..what’s going on?

[@MrCuervoRacing]

just got way too busy in the shop, got behind, still behind quite a bit on engines, too much stress and not enough time. we do have some exciting things coming up.

[@xxthewolfxx]

Scam /spam b.s. don’t Google this

[@nicholasburns7257]

I have a 2017 raptor 700r with a dual empire industries exhaust and a fci intake system and I got the power commander fc I need a good map could you help me???

[@MrCuervoRacing]

email us to [e-mail]

[@ayensonpere2658]

How I can buy a map from you

[@69sert]

can u import an pcv map to pc6?

[@MrCuervoRacing]

Currently no. Im not sure if they will change the software to add that feature or not

[@ezequiel7926]

mr cuervo.I have in my raptor 700r, 2019 the fusion efi, where I can download the maps.

[@MrCuervoRacing]

You can email me the info.

[@mnricar7]

@@MrCuervoRacing can you please provide me the email

[@germandelara7249]

Do you live in a area called Perris ca I'm looking for a mechanic?

[@MrCuervoRacing]

Haven't lived there in over 20 years.

[@isaacdiehl9249]

I need a map built

[@MrCuervoRacing]

Email me at [e-mail]