How To Install Ring Pro 2 Doorbell

[@Ssoberto]

Super helpful! The directions that came with the ring were so confusing! Thanks!

[@fersenashya4962]

Excellent instructions, very clear voice. thank you for the assistants

[@joyyyyyyyy]

This video is much better than the paper instructions! Thank you so much!

[@jassymoore29]

Really good video. Super precise and clear instructions. Thanks for the help!

[@boykinlp]

I appreciate your installation video. I just got mine and am ready to install it myself.

[@jpg901c]

Needed just a bit of guidance on installing the chime transformer. Rock solid. Thank you!

[@leebearlondonlee]

Thanks so much for this, I would have probably hired someone to do this for me if I hadn’t seen your video.

[@Dhi-fe5eu]

Great video. You spoke very clear. I love how you went through all the steps needed.

[@albertoperez1947]

You make very good clear a straight video. Even people like me who are not expert i understood all the instructions. Thanks a lot.

[@howardj2878]

Excellent presentation.

[@franksteffero7714]

Thanks for the video. It really helped my installation go smoothly.

[@OneHourSmartHome]

Glad to help! Thanks for watching!

[@begaqincer]

Not sure if you're an instructor by profession . But this is a high quality video.

[@Galucia]

I had to try way to many videos before finding this and getting clear instructions on how to remove faceplate. Thank you.

[@ladyfirehorse2230]

Great tutorial. Clear and precise! Thank you! 😊

[@thomasking9221]

Thank you. The instructions with all these Ring products are pretty lame. I installed the whole house security system and decided to add the doorbell even though I have a front of house free-standing camera. This video made it so much easier to install.

[@glennmeghani3181]

i have never had such a clear tutorial as these. Thank you. Really precise and so easy too follow step by step.

[@wesharding2663]

Fantastic! Great video!!! Thank you!

[@jasonteopaco8489]

What if I don’t want to use my old doorbell chime? Do I still need to connect the power adapter? Any tip is appreciated. Thank you!

[@Bklynpimpstress]

Does this disable your house original chime? When connected?

[@MDTAR15]

Super precise installation video. Better than the rest.

[@OneHourSmartHome]

Thanks! I appreciate the comment. Glad I was able to help.

[@26-CJ]

@@OneHourSmartHomewe’re you using VS 3 of the power adapter in this video? Trying to figure out how to bypass my mechanical doorbell chime and use the Ring Chime Pro by itself? Do you know how too

[@amck72]

Great video and easy set up. I can`t wait to get mine.

[@PearlTheSpinster]

Hold on plot twist😂😂 😂.what this extra stuff in the box

[@diyeric4114]

Do you still have to upgrade your transformer even when you have fitted a ring power adapter.

[@FaiyzaBeg]

Your instructions are so much better then the app itself! Wish they made a wireless version of this!

[@ricpaney]

Is already in the market wireless ring

[@fabianreid7368]

Great Video !!

[@6ft5jw]

Thank you for the video. Was able to install myself bcuz of your detailed video.

[@maryzpugz1]

Great instructions! Thank you!!!

[@TrappedQue]

Does the chime power adapter comes with the Pro 2?

[@cohall46]

Very helpful. Thanks for sharing.

[@OneHourSmartHome]

Glad it was helpful!

[@BigBrownTruck22]

Is my existing, mechanical chime supposed to ring when pressing the Pro 2 doorbell button? Because mine doesn't. Everything else seems to be working though.

[@thischildishlifestyle]

Did you ever get an answer to this ? Mine is the same way.

[@BigBrownTruck22]

@@thischildishlifestyle Nope. If I work up the energy, I'll call Ring and post their response here.

[@thischildishlifestyle]

OK thank you. I'll do the same.

[@ihadlunch8575]

I just installed me ring pro 1 . The mechanical chime rings about 1 second after pressing the ring pro button

[@clisaa6974]

^ Do you have to install the power adaptor? I have an OG Ring, that we never used a power adaptor. We installed the ring replacing our old ring but it says transformer voltage poor and power input 3.

[@AncientAviator]

Great video! Thanks very much!

[@OneHourSmartHome]

You bet!

[@bwilsonscuba]

Do you need two power adaptors if you have two ring pro 2 doorbells?

[@rave2173]

Does this need a diode for a digital doorbell to play its full tone ?

[@jsmorton674]

Excellent instructions. Thanks so much!

[@NnNN-e6b2g]

Can i ask for working with existing chime for the Pro2 if it sounds your existing chime in the house when the buttons pressed on the Ring. I keep seeing yes and no on google, so im unsure if need to buy a chime or if the doorbell will sound in house as normal before installation. Thanks

[@justinbraun3503]

Great video. You measured 11V in your linked video with the multimeter, but the Ring Pro 2 you identified is a min of 16V. Your ring pro 2 works on 11V? How does it work at night in the dark?

[@jpaube1]

Do you have to install the ring power adapter? would it still work okay with out it? i have no intention on using the existing chime

[@42Slab]

Surprised nobody responded to you but for future installers with the same question, no you do not need the power adaptor unless your voltage is below the threshold of 16v after testing.

[@johnisaac566]

@@42Slab NOT TRUE. I actually read your reply before installing and my ring pro 2, it was getting hot and wouldn't connect and acting all weird. I called tech support. Told them I had 16 A/C volts at the door bell, they said it doesn't matter you have to use the power adapter. Hooked it up and it connected right away and didn't get hot anymore. Use it!!

[@42Slab]

I've had 2 ring pros now and haven't needed it so...

[@fiftyfabulous1775]

Do you have a video that shows how to install the corner mount?

[@fredthedude2]

Great video. Is this worth spending more money on over the Ring Doorbell Wired? I am doing a full renovation of my house, so I will put new wiring from the electrical transformer to the front door and use a Ring Chime. I don't have an existing old-school chime in my house.

[@mikesando7766]

Late, but how did it work out? Plan to do the same.

[@fredthedude2]

@@mikesando7766 Works like a charm! I bought the Ring transformer that converts my 230V power into 12V (I think) and had the electrician hook everything up inside my fuse box. Works really well, so nice that i dont have to worry about charging any batteries and the video quality is more than sufficient for me. Edit: Forgot which video this was connected to. I bought the Doorbell Wired version, and am really happy with the cheaper option

[@mikesando7766]

@@fredthedude2 thanks for the reply.

[@rasta4ridez884]

It's wild people charge so much for easy installation

[@tarheelyoungster7524]

If I don't install the black bracket isn't it easy for someone to steal the doorbell?

[@kushalphoenix1]

Attaching the doorbell to the mount is a little difficult but once it locks into place it seems extremely sturdy. kzbin.infoUgkxxHZwMa8CsRjYhf9s4W8w0Dwm47uytWOp I replaced my regular doorbell with this and hard wired it in, using my existing wires and mechanical chime. It works perfect so far and integrates perfectly with my blink camera system. It also works seamlessly with Alexa

[@MrPhynesse]

Great video!!!!

[@JMD535]

Ha! We have the same Doorbell Chime unit! Hmm,...I imagine millions of others has the same unit! LOL!

[@Ken-us2uw]

thank you. great helpful video.

[@mayflower2158]

This was literally perfect!! Thank you!! You made it seem so doable for me! Yay

[@RightToFreedomGirl]

NO IT WASNT PERFECT DOES IT MATTER WHERE THE RED WIRE GOES VS. WHITE?

[@ArtCardenas]

does the blue light turns on when motion detection or darkness? or only when pressed?

[@charlesthomas6987]

Great video. What if you don’t have a chime box for the pro 2. Does ring sell a chime box or a full kit with a pro 2?

[@DaddyODylan]

Awesome video, I really liked the step by step. One suggestion, go back and blur the address.

[@bg4406]

What is the purpose of that little battery being connected to the doorbell chime transformer???

[@mjlcarguy54]

Great tutorial thanks

[@lookforbriansjazz7832]

How do you know where the red or white wires went on your new Ring unit? Thanks!!

[@roderickstewart4043]

Can this doorbell be installed without existing wires?

[@ricpaney]

Power adaptor is necessary ??? What about if I have wire straight to from panel to ring

[@spikedaffy]

what does the power adapter do ?

[@Killian665]

If you have a prime chime doorbell you don’t have to use the power kit and all that with the Ring or worry about having the right transformer. Makes everything way easier.

[@LonestarTXDL]

I see on your video to check transformer voltage, you show yours is 11.48 (looks like the exact door and doorbell). Then this video you state that your transformer is sufficient for the 16-24 requirement for the ring pro 2. Did you upgrade the transformer or are you using the 11.48 transformer for this pro 2?

[@mrodz65]

I second this!

[@michaeltang2309]

My new house doesn't have 3 terminals on the bell (no Transformer). Does it gets really hot??

[@binbobby]

You don't need to install the frame support for the camera? Other videos show 2 components getting bolted to the door

[@episcopas]

What do you do with the white wires?

[@congsan3528]

After installing the Pro 2. I accidentally passed the selection option of my mechanical chimes check. Now, the mechanical chime in the house does not work. Any suggestion? THanks

[@RobertM949]

You should install that ring power “adapter” first and then the doorbell. That protects the doorbell from voltage spikes. Otherwise you risk damaging your ring camera before you even get it installed.

[@GranPuba]

Well the first thing you're supposed to do is flip the breaker. So you shouldn't be getting a spike through the line if you flip the brake or on the doorbell.

[@safehaven3486]

Robert is right. The Pro Power Kit ensures that your Ring video doorbell gets the power it needs and Must be installed before you install your video doorbell. I just followed the video and the doorbell worked at first. (FYI i flipped the breaker and switched it back on). After I installed the adapter it is no longer working. So now I'm guessing it's fried

[@larryc2321]

Thanks..... Very Good....

[@michaelbellsmith5113]

Thank you

[@ciaranh5907]

How do we install these if you don’t have an existing doorbell or wiring ?

[@Gingerlion777]

Then you need the one with kabel

[@jesusc1834]

Does it matter which side the red and white cable is screwed on the ring doorbell?

[@odiebravo4543]

Did you change your transformer? I noticed in the video where you tested for voltage it was below the required voltage.

[@steveo6715]

Thanks - perfect tutorial and allowed an easy installation.

[@sahebahmed8237]

What if you have 2 door bell chimes

[@dlyons1721]

My doorbell had power but couldn't connect to my internet. The suggestion was the router was too far away from the doorbell although it's only about 25 feet. Also the original wired doorbell chime didn't work. Is this related to the failure of the doorbell to connect to the internet?

[@lynneftw]

Warning: DO NOT attempt to drink a shot every time he says "go ahead" or you WILL get alcohol poisoning or liver disease. 😅

[@PearlTheSpinster]

😂😂😂😂

[@tambui5775]

very good

[@Smedley61]

After installing the power kit, the Ring Pro 2 works but the health says the voltage is poor. I measured 9.8v at the doorbell. If the powerpack is working, should I be measuring around 16v at the doorbell? Thanks.

[@ballerprodigy1987]

Did you find a solution to this?

[@Smedley61]

@@ballerprodigy1987 I replaced the house doorbell transformer (from 1987) with a 16V I bought off Amazon. No issues.

[@teymoors]

Thanks

[@kr6277]

Recently installed the Ring video doorbell pro 2. We love it, but having issues with the transformer voltage reading in the Device Heath tab on the app. The pro 2 needs 16-24 volts and according to the Ring app, the voltage is around 16 which is good, but at times it drops to 15 volts and then I get a "poor" reading in the Device Health tab. Ring told me I probably needed a new transformer, however none of us can find it. My question is, if the voltage drops to 15 periodically, it that ok? If not, sounds like I'll need a totally different doorbell since we cannot locate the transformer. Any suggestions would be appreciated Thanks!

[@OGCJ10]

Did you figure out what the problem was ?

[@whatthe2458]

Look in side your furnace. May use the same one to power your thermostat.

[@OGCJ10]

@@whatthe2458 can you explain?

[@miggonza25]

where can i buy the ring pro power kit v2?

[@episcopas]

Let me clarify my question. There is AC wiring for a doorbell, but the previous owners installed a battery operated one. So, my questions about the white wires and what to do with them.

[@TheRealityTwister]

My Ring Pro is getting to 140def F very hot and it stops working.. any clues?

[@pierremiche20]

Hello, I bought 2 ring doorbells, one for the front door and the other for the back door. The one in front is installed without problem and the one behind cannot install, the ring instead of the light going around in circles it flashes rather it means there is a problem. Can you help me please

[@earlisking]

Does it work if your doorbell wires are on the side of the house and not facing the front of the house?

[@tiggersmith7393]

Why do you have to add a power adapter?...there is already power right?..

[@tomnugent6525]

How high up is the doorbell on the door frame out of interest?

[@joeybowdoin986]

At 6:37 it shows an address, I just want to make sure it gets blurred if that is your address

[@BlahBlahBlah12323]

I hooked up the ring doorbell, and turned the power back on. I heard the doorbell speak. Then, I had to turn the power back off because I forgot to install the power adapter. I did that, and now I have no power to doorbell and none in the lines that go to the chime. Did I just fry everything?

[@Red23165]

thanks

[@richardnewsom1385]

Can I add to more than 1 iPhone to the account, such as my wife and I.

[@RightToFreedomGirl]

WHY didnu SPEED UP the wiring part? Omg thats the most important part. Does it mayter which wire goes where?

[@VOLTRONDEFENDER4440]

if your doorbell button is lighted and no power you can easly tell when the button isent illuminated

[@xversacex]

Anybody able to please assist? What if I only have a doorbell transformer? It only has two prongs that have screws. How do I know which is "trans" or "front" (assuming I am supposed to install the ring power adapter to it)? Or is there no specific orientation, just as long as the power adapters prongs are mounted to each transformer prong? LoL not sure if I'm using the correct terminology. Issue was we have a Video Doorbell V4 which does not stand a chance in Canadian weather... Have to go with the Video Doorbell Pro 2 now.

[@victorvek5227]

With my porch light on, and HDR set to off, I get full color recording at night. But if I set HDR to on, with porch light on, it records in black & white only. Anyone else having this issue with the pro 2 doorbell??

[@grumble555]

What is the purpose of the "Power Adapter"? Will it matter if the existing transformer is 10 VA?

[@OneHourSmartHome]

The Ring Pro 2 requires 16-24V AC. If your transformer puts out 16V - 10VA it may work however typically 16V 30VA is recommended like this transformer: amzn.to/33NlY0r The purpose of the power adapter/booster installed in the chime is to provide a reliable power supply / boost for the Ring Pro 2 because it uses more power than the typical battery powered Ring Doorbells like the Ring 4 Doorbell: amzn.to/3fnyzNh. If you have 10va it may work, but if you are worried it will not work and you don't want to replace the doorbell transformer the Ring 4 would work in that situation, however the Ring 4 video quality is not as good as the Ring Pro 2 Doorbell video quality. I just posted a review on the Ring 4 today: kzbin.info/www/bejne/eaO2aYWka52tsK8

[@TANOSTONE]

I am in South America and we use 220v. Currently my doorbell has a transformer with the following specs: input: 220Vac ~ 0.55A - 50Hz. Output: 12Vcc -1.5A, Max 18w. Can you confirm if the Video Doorbell Pro 2 will work? Thank you!!

[@TheNpcNoob]

No it won’t, needs 16-24v

[@michaelwas8549]

Where's your resistor?

[@Barberbear78]

thanks and FYI nice beard! XD

[@premacy2003]

How do you install if you don’t have an existing door bell?

[@TheReap420]

Drill new holes

[@rayansworld2606]

Fun fact:Ring video doorbell pro 2 plug in doesn’t need a pro power kit

[@redeclipzegsx]

Are you sure? How wouldn’t it need it?

[@AceBMartin]

🔥💪🏾

[@Outdoorshuntingshooting]

Great job, unlike the ring instructions provided, absolutely effing useless.

[@jover936]

Mine won't fit