How to install Shorty Levers on yamaha R3

here is the link where i bought the shorty levers, you can customize any color combo.
rover.ebay.com...

[@SpecOps_Gaming]

8 years ago!!! and still helped me install my levers today! Great video man! Been looking all day for install video that isn’t someone talking about how they broke them, one guy talked for 10 mins about how he broke them then it was 4x speed when he started the install and didn’t know what he did. This helped me get my levers installed in 20 mins after watching, Thanks brother, ride safe!!

[@ACProductions77]

your very Welcome =) always great to see a positive comment. Thats why i created my ch as most of these videos don't show the process or explain very well what they are doing or at times like you have just experience where they speed up the video and don't say anything that's the Worst! Glad that even though this video is old but still a goodie in helping take care as well & be safe out there.

[@ActionTeam12]

Finally an instructional you tube video that gets straight to the point. Thanks a bunch

[@diawongl.ac.4021]

good video. Detailed and informative without annoying side commentary on other vids.

[@benmcquarrie9094]

Thanx man. Just set my time to daylight savings EST😊

[@markn1618]

thanks. Dont forget everyone to grease the clutch side with white lithium grease. Brake side with Silicone oil or similar. Nickel width gap on clutch side before the cable pulls

[@symonlois6156]

An instructional video thats direct to the point. Thank you.

[@jasonsanderson9385]

Yo Brotha Thank you for the Video!!!!! Just swapped out my wife's clutch and brake lever to small blue ones like yours...... I paid mechanic to install tomorrow morning, but after watching this video I just did and my wife Loves it ...... Lol now I need a video how to change the grips. Thanks again 👍

[@ACProductions77]

no problem glad my videos are helping , btw here is the video on how to change the grips kzbin.info/www/bejne/gXTQlnmDjcmimLs

[@AQUATICxFIREZ]

Great video!!!! Im ablut to go do my set right now!

[@JayRaxter]

I posted a quick video of my shorty's with a direct link to here for the install. Great video man...

[@rgayle23]

Thank you for uploading this. Saved the day!

[@ozpilotgirl]

Awesome video!!! Thanks heaps. Has given me the confidence to do this on my own!!!!!

[@ACProductions77]

you welcome glad im able to help =)

[@LunchBXcrue]

Woah woah... If the clutch lever is tight you don't just move the lever in close with the clicker... You have to loosen the clutch cable until there is a tiny amount of play in it. Clutch levers need to have play so the clutch can fully engage! The way you have that set up now being so tight means the clutch will never fully engage because the lever isn't letting it and you'll loose tons of power, the clutch will slip and eventually burn out.

[@P1015532oni]

You just saved me paying for the mechanic to do it! Thanks bro!

[@pdog708]

Thank you so much bro I really appreciate

[@AngelYZ125]

Thanks for the video, it's been very helpful!

[@alfonsocastillon8714]

your welcome

[@alfonsocastillon8714]

you mean the clutch cable adjuster screw? use locking pliers that will get a good grip on it to loosen it.

[@105rogue]

great video man thanks!!!

[@alfonsocastillon8714]

you welcome, if you have any questions feel free to ask =)

[@sarertnockram]

buying these too 😊

[@josephsebastian8380]

Wow thanks bro thanks for the tip

[@alfredodiaz3496]

Great video!!!

[@jonathanbaldizon5318]

very effective video Thanks. is there any way to adjust the front brakes without flushing?

[@ACProductions77]

what you mean flushing? the front brakes are self adjusting, but if you meant by the lever for feel then the lever has 6 adjustment points select which feels more comfortable for you just note that the closer the lever is to your hand grips you may not get 100% brake pressure.

[@HeroofSomething]

can you help me out? I bought some very similar except mine didn't need the metal piece you inserted in the clutch lever. but when I pull in the clutch, it just stays pulled in. I have to put it back into place and when I turned it on even with the clutch all the way out, the bike was not moving when I put it into gear.... help please

[@shadoeeee2946]

Is this the same procedure for a 2021 yamaha r3

[@ACProductions77]

it should be nothing much has changed in that area

[@shadoeeee2946]

@@ACProductions77 I installed them yesterday thanks to your video. Appreciate ya brother

[@ACProductions77]

after doing this install and if your having trouble with Engagement point on the clutch check out my next video kzbin.info/www/bejne/hKrXpqyNoap4aac

[@uknohowido04]

+AC Productions i have a question regarding the brake side. you know how when you have the stock lever on, theres a point where it clicks and you feel the bike start braking, well after i installed the aftermarket short lever, i hear the click but it takes a bit more of grabbing the brake lever for the bike to start braking. is this normal or did i install it incorrectly?

[@alfonsocastillon8714]

+ldiaz04 on the lever you should have 6 adjustment points I have mine set to number 2 which puts the lever closer to the handgrip. try this if you still feel that the brakes are not grabbing like they use to then let me know.

[@uknohowido04]

+Alfonso Castillon thanks! back to normal again. awesome video!

[@alfonsocastillon8714]

ldiaz04 nice glad to help

[@sikesisback]

So brake side the lights wont work but What happens if u break the button on the clutch side?

[@ACProductions77]

OFFICIAL SIKES there is no button on the clutch side that I know of

[@HUSTLINISMYGAME]

what about the black o ring that comes with the stock lever? Do we need it?

[@ACProductions77]

no you dont need it, plus it makes it very difficult to install with it.

[@ACProductions77]

not really, but if you want to install it back with the new levers it will be difficult cuz its already a tight fit

[@tehstylz5517]

how did you write the colors you wanted? I'm having trouble because after I put my info in to make the purchase, there's no where for me to leave the color I want. thanks

[@ACProductions77]

+Teh StyLz if there is no section for colors make sure you email the seller ASAP with lever color and clicker color

[@xicoyoman]

I'm thinking of buying these levers. Can anyone give me some feedback about them?

[@ACProductions77]

i did a review on them check out my video kzbin.info/www/bejne/n3-saoeviNamY6M go to 6:39

[@xicoyoman]

thank you!

[@furbabymom3159]

What happens if you break the button that you were talking about???? Anyone????

[@ACProductions77]

if you break the button the brake lights wont turn on

[@parthivbomma6570]

How are the levers, are they holding up pretty good?

[@ACProductions77]

no issues yet. work great

[@furbabymom3159]

Can I still ride the bike?? If the button was broken!

[@ACProductions77]

if you break the button on the brake side then your brake lights wont come on but your brakes will still work.

[@ACProductions77]

yes you can still ride the bike the only thing that will be effected is that no one behind you will know that you are applying your brakes cuz your Brake light wont turn on.

[@TheRouschmustang]

Is there any play on levers . I bought some from eBay and man there's a lot of play.

[@alfonsocastillon8714]

if you install some very thin shims that will get rid of some of the play

[@ACProductions77]

i dont have much play on mine, but if you have alot of play then you may want to install some thin shims where the bolt goes through. take out the bolt slide the shim then put back the bolt. that should help with the play, might be alittle difficult to get the shim in.

[@JohnLetra]

this work on a 2017 r3?

[@ACProductions77]

yes it will work on ALL models of the R3 since the bike it self has no changes since 2015 the only thing that has changed every year is color and graphics everything else is all the Same!.

[@parthivbomma6570]

Is it same with the ABS model

[@ACProductions77]

it should be the only difference with ABS model is that it has a sensor by the front wheel

[@parthivbomma6570]

AC Productions ok can you install steel braided brake lines in R3 abs model

[@ACProductions77]

yes you can, it will improve on the feel of the lever it will feel more firm. plus under heat and load the brake line will not expand like the stock brake line.

[@parthivbomma6570]

AC Productions can spiglers brake line fit in abs R3 because some people said it would not

[@ACProductions77]

I would check straight from that company to see if they have brake lines made for the abs ver of the R3

[@denggenu]

Thank you so much bro I really appreciate

[@HeroofSomething]

can you help me out? I bought some very similar except mine didn't need the metal piece you inserted in the clutch lever. but when I pull in the clutch, it just stays pulled in. I have to put it back into place and when I turned it on even with the clutch all the way out, the bike was not moving when I put it into gear.... help please

[@ACProductions77]

+HeroofSomething if it doesnt retract back after you pulled on the lever that means that the cable doesnt have enough tension on it. on my video go to the spot of 6mins and 53secs i pin point the spot to adjust the cable. if you need any more help let me know

[@HeroofSomething]

+AC Productions well... I ended up shaving off the big screw and now I think I'll have to replace the whole plastic thing that holds the clutch, do you know where I could get another?

[@alfonsocastillon8714]

if you have the clutch cable adjuster all the way out and your clutch is not ingaugeing then you have to take off your right side fairing and adjust the clutch cable from there. if you still need help let me know and I'll make a video of how to adjust it