How To Install The Best Sound Deadening In A Car - Is KILMAT Deadener Worth The Cost MONTE CARLO SS

[@obslife1985]

I used this stuff in my 96 Silverado single cab. It made a huge difference bro. Like almost no road noise and the sound quality was a lot better. I did the roof above the headliner the entire floor under the carpet all the way out to the back window and the inner doors and outer doors. And I used two boxes of this stuff and I have like 16 sheets left.

[@SprayWayCustoms]

Sounds like a good plan. Thanks

[@noneofficial305]

@@SprayWayCustoms you welcome family u have email or a contact info ?

[@boxbrosinc2953]

You're always on time with these tutorials

[@SprayWayCustoms]

Thanks for tuning in

[@jeffgoswick7660]

Sprayway the only man I know that would make a floorboard beautiful enough to not want to put anything on it

[@jamesgeorge4874]

His floor looks better than the fenders of some "body shops" in my area, ffs !

[@kennethabrazee3540]

Lol true story

[@SprayWayCustoms]

Lol…thanks man

[@christophercunningham1068]

@@SprayWayCustomswhere you located brother

[@calvinlittle5781]

glad you're made this video I'm in the process of taking my carpet out and getting ready to put sound deadening in it thanks for the video can't wait

[@lmsendit9531]

Try the spray in found deadner it works amazingly and you get a lot more coverage than what you would with the stick on

[@SprayWayCustoms]

No problem at all Calvin

[@earthlife452]

Looks amazing man! I did the same to my trans am. Rust treated the entire inside then painted to seal and completely lined everything in that same mill liner! Looks amazing great job!!!

[@SprayWayCustoms]

Thank you

[@codygores4036]

Hell yeah sprayway love your videos. I wish you could paint my truck your work is truly amazing!

[@SprayWayCustoms]

Thanks Cody

[@tonyadams09]

Another great video and I can wait to see it all back together I know it's going to be super nice

[@SprayWayCustoms]

Thanks Tony

[@BillytheConquer]

Sundown Audio has some 160mil deadner for cheap but you have to use a torch to get it on. I did 5 layers throughout my entire 2008 suburban & its basically bulletproof now.

[@SprayWayCustoms]

😂😂Sounds about right…180 mil 😳. Thanks man

[@myopinion2.056]

Can’t wait to to see you install the seats I’m doing the exact same seats in my 84 cutlass

[@SprayWayCustoms]

Ok then…stay tuned

[@gothamantiquities2595]

I’m mad at you SPRAYWAY!!! I wish you weren’t so damn far from me cause, I would be honored to have you perfect my old Coupe!!!! There are some good people in New York but nothing like you who actually give a shit about your clients!

[@SprayWayCustoms]

😂😂Thanks for the compliment

[@TopSarge912]

Excellent video as always, I’m in the process of doing the same thing to my truck, seeing you do this was great!

[@SprayWayCustoms]

Great…glad to hear that

[@Rick-Williams59]

Another job well done brotherman. I put sound deadener in my GTO, it makes a world of difference. Great video.

[@SprayWayCustoms]

Thanks Rick

[@Bodic411]

Looking good bro. Keep up the great work!! 👍🏽

[@SprayWayCustoms]

Thanks 🙏🏾

[@deanm4138]

Very cool Mr. Sprayway that will definitely keep out the road noise

[@SprayWayCustoms]

Thanks Dean M

[@GregsGarage]

I haven't used that brand, but it looks like it will work well. Thanks for bringing us along!

[@SprayWayCustoms]

Thank you Greg…seems like some good stuff

[@MrMan-ol4ic]

It's awesome! Highly recommend!

[@lloydbaker6988]

Thanks Sprayway, looking forward to the video today. 👍

[@SprayWayCustoms]

Thanks for staying tuned Lloyd

[@PHARRAWAY]

That is awesome nice work

[@SprayWayCustoms]

Thanks Pharraway

[@UndergroundPaintKing]

I haven’t done any of this to my projects but I definitely think I will be now, nice work Sprayway 💪🏾

[@SprayWayCustoms]

I haven’t either King. I’ll be doing the floor on mines but I’m not sure about the trunk because us painters know how hard it is to remove before paint 😂😂

[@UndergroundPaintKing]

@@SprayWayCustoms 😂 I agree

[@ridinrancher9443]

Kill at is the cheapest way to get better sound quality in your car. I have installed custom stereos for years and this and roll in bed liner does the trick. Great video. 💪

[@SprayWayCustoms]

Thank you

[@lenny351]

Love your videos. I have been thinking about installing the kill mat in my Mustangl this video helps Very well done!

[@SprayWayCustoms]

Great…thanks again. Did you receive the spraygun?

[@lenny351]

@@SprayWayCustoms sorry for the delay i have been away for work. Yes I got it. Thank you very much very awesome! cant wait to use it

[@randygainessr.7823]

Southern Chevy Gone Be Smiling Down on you keep up the good work your making him proud...

[@SprayWayCustoms]

Yes he will…thanks 😊

[@MrG732]

Great vid. I have to do my car for a system that I’m installing. I needed to see tips and tricks before I started. Thanks

[@SprayWayCustoms]

No problem at all Glenn

[@grahamking1036]

Another great video. Outstanding work. Between this one and the floor pan video you saved me thousands with the instruction and all PRODUCT INFO. Thanks very much!!

[@SprayWayCustoms]

Glad to help

[@Mr.Frost181]

You a bad man spray way 💪🏾💪🏾🔥🔥got that thing looking so crispy clean

[@SprayWayCustoms]

Thanks Mr. Frost

[@rolltide-pc5qr]

Excellent job man

[@SprayWayCustoms]

Appreciate

[@christopherc3017]

Appreciate the info. Been thinking about doing the doors and such on the 95 impala

[@SprayWayCustoms]

I’ll be doing the same myself

[@christopherc3017]

@@SprayWayCustoms if you feel like filming it I know I personally would appreciate it. I know I can trust your judgment on things like this and thank you for sharing your info. It’s helped save me some decent money on repairs and such.

[@alphawolf5666]

Man this SS is coming out sick‼️ 😎👍

[@SprayWayCustoms]

Thanks 🙏🏾

[@deepsouth3957]

I’m gonna have to try this Kilmat

[@SprayWayCustoms]

Thanks for watching

[@MrMan-ol4ic]

Brother, I layed Kill Matt in my Whole Semi Truck, sleeper, cab, Walls, ETC! It made the biggest difference in the world. It took forever Yes, but in the end so worth it. I did that because of my sound system, 4,400 Watts of love.... Lol . Also the road noises! LOL And I bought it off Amazon! Mail lady was not happy with me that Day!

[@SprayWayCustoms]

Lol…appreciate your support

[@damxgopak457]

Cool I bought a box of it to put in my AMX looking forward to your assessment .

[@SprayWayCustoms]

Great…it goes down well

[@ahmadibrahim1833]

You inspire me sir. Thank you for making these videos man.

[@SprayWayCustoms]

Thank you for watching

[@bobbyhilliard1108]

another great video and helpful

[@SprayWayCustoms]

Thanks Bobby

[@quitmanwhitsey6320]

Man that G Body is getting all love. 💯💯💯🔥🔥🔥

[@SprayWayCustoms]

Yes indeed

[@LReese-de4wt]

Same drain plugs on my 85 cut. I was stuck on my killmat there. You got me through. Thanks fam!

[@SprayWayCustoms]

Glad I could help

[@noneofficial305]

Man good to see the ogs of this KZbin car stuff still doing it there thang?!?? Next year fam I’m going to bring my car to u! No cap where u at again?

[@SprayWayCustoms]

Ok then..I appreciate the support

[@djronthemechanic3695]

Yes sir that’s what I added to my ride and my doors are solid and my trunk lid is the same.

[@SprayWayCustoms]

Yes indeed fam 🤝

[@Locust5239]

Amazing work Sprayway always making it look easy. Keeps me motivated to keep doin my own projects 💯 keep up the great work. An can't wait to see the seats. Trying find some seats for my 93 chevy any ideas?

[@SprayWayCustoms]

Appreciate you

[@wademohr5504]

Make sure you put into the doors aswell

[@SprayWayCustoms]

Thanks Wade

[@familyfirstmaconga.1942]

Are you doing the trunk also?

[@SprayWayCustoms]

It wasn’t planned because it always can be done at a later date. I just wanted to do the floors before I install the carpet and seats.

[@Markhope-e3z]

You didn't skip a beat awesome work.🙌

[@SprayWayCustoms]

Thanks Mark

[@guaranteedexpress8344]

Good stuff fam

[@SprayWayCustoms]

Appreciate you

[@2H2521]

Beautiful car man, you did a really nice job. I’m currently installing this stuff in my truck, and damn it’s a lot of work! I ran out of material so I had to buy another box.

[@SprayWayCustoms]

Thanks 🙏🏾

[@2H2521]

@@SprayWayCustoms You’re welcome, I also noticed the color difference in the print this stuff too so it’s not just you.

[@seanroane5036]

Nice job Spray!! You stayed with the puzzle pieces bro.

[@SprayWayCustoms]

Appreciate you Sean

[@wardellbrent5569]

Excellent job 👏 👍

[@SprayWayCustoms]

Thanks Wardell

[@2koolforyou88]

I see you're changing up with the camera 💪💪 looking good

[@SprayWayCustoms]

Thanks man…I’m trying to evolve 😁

[@smoothreleaserecords2181]

Everything's looking good

[@SprayWayCustoms]

Yes it is

[@daysend1341]

Great video as always I re-did the carpet in my Toyota pickup and the carpet company had options for this type of sound deadening to be installed at the bottom of the carpet. Was so easy to install just slip it in and cut to fit. It was pre molded and deadening with thick rubber and padding between. I wish I could remember the company name but you can Google it. Hope it helps someone. Thanks spray way for another great video.

[@SprayWayCustoms]

Thanks for the info

[@ycheatus1700]

Excellent work, as always

[@SprayWayCustoms]

Thanks

[@dhorn247]

The handle end of the tool works good for those rounded spots. I did my whole cab of my silverado with kilmat

[@SprayWayCustoms]

Thanks for the info

[@richardmowerman]

Much respect to u my guy.keep it up

[@SprayWayCustoms]

Thanks Richard

[@aky280]

Nice and neat per usual!

[@SprayWayCustoms]

Thanks Aky

[@aky280]

@@SprayWayCustoms No thank you

[@johnhouseholder7682]

Finally all caught up!!thanks John from Arizona

[@SprayWayCustoms]

Thanks John

[@onceagain9128]

Nice job with the Kilmat

[@SprayWayCustoms]

Thanks

[@AutoHallicsrealone]

Your videos always on point

[@SprayWayCustoms]

Thanks Chris

[@elitecustomsinc4092]

Tuned in to another one Spray

[@SprayWayCustoms]

Thanks

[@patricksmith3761]

Excellent Work!

[@SprayWayCustoms]

Thanks Pat

[@coleture3]

This the build that make me get up and get out!!!

[@SprayWayCustoms]

Thanks 🙏🏾

[@classictunedpro]

She’s a real gem 🙏🏽🔥🎬

[@SprayWayCustoms]

Yes indeed

[@Loyalty_901]

Another smooth finish 💪🏾 💯

[@SprayWayCustoms]

Thanks Mike

[@gallejugon3350]

Looks so good , keep pushing hard .

[@SprayWayCustoms]

Thanks Galle

[@dntBdum81]

Good work Fooly I’m in the process of doing this to my Donk

[@SprayWayCustoms]

Yes indeed

[@ernestomejia110]

kudos for continuing this project. Had Southern Chevy TV (RIP) already paid for the whole project or are you finishing the car out of your own pocket?

[@SprayWayCustoms]

Thanks Ernesto

[@KenTennKustomz]

SPRAY WAYYYYYYYYYYYY! 💯🔥💪🏼

[@SprayWayCustoms]

What it do Ken-Tenn 💪🏾

[@KenTennKustomz]

@@SprayWayCustoms Chillin Chillin Gang 💯💯💯💯💯💯🔥💪🏼

[@qualitycheck1196]

I see you getting it on together

[@SprayWayCustoms]

Thanks

[@417jackrabbit]

After doing this 2 or 3 times i would recomend doing the inner quarters between the door sill and wheel well and back side of door panels makes a big difference

[@SprayWayCustoms]

Thanks Jeff for the info

[@workingmansrestorations7071]

Looks good. I have never installed sound dealer in over 300cars. I will probably do in my blazer

[@SprayWayCustoms]

Thanks…I haven’t neither in any of my personal cars

[@Fl-diesel-Mechanic]

Thank you for sharing this information you did a great job

[@SprayWayCustoms]

Glad it was helpful!

[@antoniocrawford5431]

Like I said you can do it all man that looks good bro

[@SprayWayCustoms]

Thanks Antonio

[@tellitlikeitis1067]

Nice

[@SprayWayCustoms]

Thanks

[@troyfitzpatrick7672]

Thanks for the great video! As always very usable information! Keep them coming!

[@SprayWayCustoms]

Thanks for tuning in Troy

[@sgnt9337]

Another GREAT video! That material kind of reminds me of vichithane roofing sealer.

[@SprayWayCustoms]

Yes, pretty much what it is

[@onemanbodyshop]

Looks amazing sprayway 🔥💯💯💪🏽

[@SprayWayCustoms]

Much appreciated fam

[@perchwilliams8307]

The seat cold nice work

[@SprayWayCustoms]

Thanks fam

[@robertkeenbuildingmylifesh3429]

Oooooo majorly life motivational to me on this one... I want to sound deadening for my dually truck........

[@SprayWayCustoms]

Thanks Rob

[@nicotoscani8270]

How much weight would you say was added with the killmat?

[@SprayWayCustoms]

That I don’t know 😳don’t get me to lying 🤥

[@MyBlack101]

Sprayway you a bad man Jesus

[@SprayWayCustoms]

Lol…appreciate you True Gritt

[@whipzpaintlyfewithjay9654]

Awesome work bro….definitely can’t wait till I make it that far with mines!! 🔥🔥🔥Fire work though, like the way you did those valve covers on the intro and definitely putting down the sound deadening materials!

[@SprayWayCustoms]

Thanks Jay 💪🏾

[@whipzpaintlyfewithjay9654]

💯 giving credit where it’s due, definitely taking the same route because my seats and carpet already out and this info was much needed for me because I initially was going with dynomat but it’s kinda costly

[@jamesthomas151]

Mann I wish I had og's like dude

[@kevindangeleit6679]

Try lizzard skin sprayable sound deadner next time, you already had the car masked off, could be done in less than half the time and your fingers and hands and knees wont hurt.

[@lmsendit9531]

I wished he would have known about that that is some badass stuff it works awesome

[@SprayWayCustoms]

Thanks Kevin…yes, everyone’s talking about the Lizzard Skin

[@swc8136]

Nice work😊

[@SprayWayCustoms]

Thanks

[@b007ice]

Good job bro 👍✌

[@SprayWayCustoms]

Thanks Mervin

[@WarrenGBody]

YESSSSSIR!!!!! 🗣 KILLMAT ON TOP!!!!! Fam I’ve used em all for over 20 years and this here is the best bang for buck sound damp. I’ve always used a glossy undercoat as well. My though was it will make the surface slick af and the sound damp will stick like crazy glue. Kinda like a sticker on a clean mirror or glass surface. Good shiz fam!!!!!🔥🔥🔥🔥🔥🔥

[@SprayWayCustoms]

Yes indeed fam

[@whymebaby5641]

I see you SprayWayCustoms

[@SprayWayCustoms]

Thanks for tuning in

[@Anthony-rb5oy]

looking good sprayway thanks for sharing 👍

[@SprayWayCustoms]

Thanks for watching Anthony

[@Randellallen65]

Thanks, this is good stuff.

[@SprayWayCustoms]

Thank you for the big support Randell

[@BigRichEHhthang100]

Get it in I see you

[@SprayWayCustoms]

Yes indeed Rich

[@JustMike2791]

If I sent you one of those head or chest mounts for your device would you wear it? You killin me not being able to use both hands! Cool video, thanks for the up

[@SprayWayCustoms]

I actually have one but I find myself using my handheld camcorder all the time

[@blindedlights7790]

Well done

[@SprayWayCustoms]

Thanks

[@Outty5000Hertz]

Saturday with spray. I’ve been using this stuff for years. It’s pretty good but warning everyone once your scissors touch that stuff they will never be the same 😂

[@SprayWayCustoms]

Thanks man

[@_AntonioX]

Is it ok to spray raptor on the floors over primer

[@SprayWayCustoms]

Yes you can

[@jahsouljah9754]

💯💯 Salute fa da review bruh dat weh

[@SprayWayCustoms]

No problem

[@chatttown7625]

Keep us updated on the build

[@SprayWayCustoms]

Sure will

[@thazsar]

Are you gonna do the doors and roof?

[@SprayWayCustoms]

It wasn’t planned

[@paintfreak9420]

Coming right along

[@SprayWayCustoms]

Thanks

[@anotherhotone5139]

Good stuff man

[@SprayWayCustoms]

Thanks

[@tagteam4621]

Back again for another one ☝️

[@SprayWayCustoms]

Thanks for watching

[@ramionmiller2342]

Sprayway you is a beast at that s*** bro keep on putting in work bro I like your work love it bro

[@SprayWayCustoms]

Thanks Ramion

[@ProudlyNobody]

where you got the hole plugs from?

[@SprayWayCustoms]

They was the original ones

[@dmotivatorone1356]

Great work

[@SprayWayCustoms]

Thanks

[@VGMStudios33]

I did this to my whole car but I used Noico instead. Not only is it cheaper it works exactly the same or better.

[@SprayWayCustoms]

Thanks for the info