How to Install the Big 3 Upgrade!! - Scion xB

[@ExtremeDailyDrivers]

Hey everyone! Views are way up on this video and I thank you, but "Likes" are way down! Please "Like" if you enjoyed the content! Thanks!!

[@ExtremeDailyDrivers]

You're the best!

[@ExtremeDailyDrivers]

Thanks!

[@AnguianoR2009]

What motor oil do you use?

[@ExtremeDailyDrivers]

@@AnguianoR2009 Check out last week's video for the answer n

[@ronnydisalvo80]

Engine to neg on battery

[@devalishxb91]

BRO I'VE ALWAYS WANTED TO DO THE BIG 3 could never find a good video on it this is absolutely amazing

[@ExtremeDailyDrivers]

Glad I could help!

[@ubreakitirepairit3569]

I simply swapped out my headlights for LED lights, added a cap and no more voltage drop / dimming lights. Swapping out your halogens for LED's take a lot of load off the 12v system.

[@christophercollyer1314]

Excellent video as always! I never miss a Toaster Tuesday, thanks for all the tutorials, looking forward to more XB content 👍🏻

[@ExtremeDailyDrivers]

More to come!

[@onehighxj]

Were did u get the strut bar and valve cover from

[@ExtremeDailyDrivers]

Stock valve cover and Hotchkis SB. Thanks for watching.

[@nicholasdavidson5683]

Nice topic. Not many people do big three videos

[@ExtremeDailyDrivers]

I have never done it until yesterday. Car is responding well!

[@Freshzaniz]

We’re hungry for a new Toaster Tuesday today! Haha

[@ExtremeDailyDrivers]

Then watch today's video and get fed!!

[@miguelmendez4718]

Great video, you should do a video switching the xb front wiper steering switch and swapping it for an intermittent wiper delay switch from a 2003 Pontiac vibe, great mod.

[@ExtremeDailyDrivers]

Already did, Bro. Where you been? Check out my BB Steering wheel video. Thanks for watching.

[@naughtysmurf64]

Yes!! I so want to do this. Can you use other years. 2003-2006?

[@miguelmendez4718]

Stephen Long yes ACDelco GM original equipment part number D6379D also 03-05 Pontiac Vibe

[@naughtysmurf64]

@@miguelmendez4718 sweet!

[@MrMonro27]

My xB is getting a little old now lol and I’m thinking doing this is a great idea, especially because of my stereo system. I’ve been noticing more of a drop in RPMs sometimes depending on what type of music is on, so this along with the system the way it is might improve things a bit. Bad grounds are the cause of a lot of vehicle electrical issues, so this is def something that can only help, if not improve.

[@ExtremeDailyDrivers]

Go for it!

[@stuartstenhouse5290]

Great video! going to order my kit from amazon tonight thank you

[@ExtremeDailyDrivers]

Awesome! It's only $25 now!

[@sisforslow2198]

Well done man! I know a black 4g wire would make it look cleaner for the alt. But understand that is how the kit comes and some people prefer to keep the positive wires red. Anyways love the video, and see you next Tuesday.

[@ExtremeDailyDrivers]

Yeah, wire is wire it doesn't matter what color the insulation is, but I always like to keep things legit when it comes to the electrical system. I don't want to confuse anyone.

[@kmartin5104]

Solder Slugs made life way easier than trying to three hand the crimp tool.

[@ExtremeDailyDrivers]

I'll have to look that up.

[@johnathancrumm]

I used to have some 8 ga. Wire laying around and I always meant to see how the wire would work out well enough

[@ExtremeDailyDrivers]

8 is a little small for this. Lots of people go with 1/0 gauge.

[@richolishis94]

I’ve always wanted to do the big 3 upgrade to my xB but could never find any solid info on how to on the xB platform. Great job man, looks great! HOWEVER you should 1000% put a fuse on that alternator cable.

[@ExtremeDailyDrivers]

Thanks! I had the same issues finding solid info too. I still believe the fuse is optional, but it's your car, do what you feel is right.

[@bartmormino907]

I am getting my grand son 2004 xb, it has been sitting outside for 6 month and nothing works on the dash or doors and I am summing it lost a ground for so many things to fail. All these systems work before he parked the car. I will upgrade the grounding first, we checked fuses and all were good.

[@crystalcookie366]

love your videos we have 3 scion xb one 2008 and two 2009 I have a question it is ok to do da alternator wire to da positive battery with no fuse...I'M SORRY FOR MY IGNORANT QUESTION.. We are ready to do the big 3 upgrade on the 3 vehicles.. thank you soo much for your time and your videos

[@ExtremeDailyDrivers]

Add one if you want. I didn't. I never had an issue. If I did it again, I still wouldn't add one, but it's your car, you do what makes you feel comfortable. Good luck and thanks for watching.

[@crystalcookie366]

@@ExtremeDailyDrivers thank you for your fast answer

[@jeantaylor6785]

Hello brandon i got my back spoiler on the way from your dude nice, im going to do my valve cover thats on my engine like you did yours except im gonna use mine i was wondering if you might have a amazone link for the valve cover gasket the like the one you got but for my valve cover steering wheels in and the wiper control like you got i love it, well let me know my friend have a awsome week.

[@ExtremeDailyDrivers]

I don't have a link and honestly can't remember. I think that was 4 years ago. I probably just used a Felpro gasket. Thanks for watching and good luck with the spolier!

[@jeantaylor6785]

@@ExtremeDailyDrivers thank you Brandon yea that will work I found one on Amazon thanks my friend have a awsome week

[@JC-hx6md]

Cool upgrade man, kicks up the box and on a budget! I was thinking after yesterday's M M vid that perhaps you could do a T T vid on re teaching Mrs. XDD to drive stick shift on the box. I think it'd be easier to get re accustomed to driving manual on the toaster than the lude and that would cover a toaster tuesday!

[@ExtremeDailyDrivers]

That video is coming, but will be with the Miata.

[@chughes1]

Thank you for sharing these Toaster mods. It has inspired me to do my own. Nice upgrade going from 13.8 to 14.4 volts. Did you notice any other improvements, like a better idle? Also, does this need to have a fuse from pos. alternator to pos. battery?

[@ExtremeDailyDrivers]

No need for a fuse. Voltage is still up. This is a great mod. Thanks for watching.

[@chughes1]

@@ExtremeDailyDrivers Thank you!

[@westbnbcoast]

Will this help if you plan on putting in a sub/amp?

[@chrisrouse2086]

Yes. Upgrading your wires will improve your overall electrical distribution and performance.

[@ExtremeDailyDrivers]

Yes! That was one of the reasons for the upgrade.

[@anonymousmc7727]

You need to upgrade the alternator that’s the real big 3

[@FreddyGonzales1986_]

What size gauge is the red cable? Are the red and black the same gauge?

[@ExtremeDailyDrivers]

I don't remember, but if you click on the links in the video's description you will have all the information you need. Thanks for watching.

[@chrisbellevue]

Under your hood looks kleen asf! Thanks for this vid. Now I need to buy some wire.

[@ExtremeDailyDrivers]

Appreciate it!!

[@ephraim.1964]

Man I just started doing some work on my 2004 xb...mainly tune up. spark plugs and coils pack, Oxygen sensors up & down stream,, camshaft, max airflow, Solenoid. every was good and smooth until I got to the throttle body IAC 2 vac house. The must uncomfortable throttle body I’ve ever worked on. there’s hardly enough room to remove those house clamps and the vac house were like glued on to the IAC. Talking about time consuming and frustrating process. Mind you all sensors were the originals and my car has now 297,500.

[@ExtremeDailyDrivers]

Yeah, that TB is a pain and that's partly why I haven't upgraded it yet. Thanks for watching.

[@o8_tOAstEr_xB]

WHERE CAN I GET A HIGH POWER ALTERNATOR FOR MY 2008 SCION XB. 200 OR HIGHER?

[@ExtremeDailyDrivers]

Autozone

[@vdittycc]

When I turn ac on belt always squeaks a second. Will this stop that?

[@ExtremeDailyDrivers]

No.

[@micheledianemiller4589]

i did this with a set of jumper cables and connectors

[@ExtremeDailyDrivers]

I don't want to know how that looks. Lol. Thanks for watching.

[@bda2672]

Good video bud, has more potential. I'd suggest 1/0 audio cable, or 2/0 welding cable, for this application. I'd suggest investing in a hydraulic press ($40-60 on amazon) since you appear to do this often enough to invest in one. This way you can properly press any gauge wire. I'd also suggest to invest in a drill/driver steel brush attachment to peel away paint from area you bolt to. Then cover up with some sort of rust proof silicone paint. This way you get pure metal contact on your bolt spot. You can also get multi spot SAE terminals to place multiple wires on a single terminal for your battery. Last, but not least, for the life of God upgrade your battery. That walmart brand won't help with heavy electrical. Upgrade your car to a XS Power battery or a Northstar battery. Overall a good video and your car deserves it plus you'll thank yourself with all the electrical demands. Cheers!

[@ExtremeDailyDrivers]

All good suggestions! Thanks for watching.

[@anonymousmc7727]

I was thinking the same thing it’s like he didn’t do the big 3 battery northstar are good battery’s all where s the alternator upgrade it needs to be much bigger

[@Eye_4_An_Eye]

so how does adding a wire directly linking the alt to the battery do anything? can u explain this? im curious of the benefits.

[@ExtremeDailyDrivers]

You are better off googling "The Big 3" I think I mention that in the video. Thanks for watching.

[@Eye_4_An_Eye]

@@ExtremeDailyDrivers thanks. Just looked it up. No, you didn't explain the benefits of the particular one I was curious about in the video. But I understand now. Audio, fuel economy and over all electrical health. Will probably be doing this soon. 👍

[@ExtremeDailyDrivers]

Yeah I'm no expert, that's why I suggested googling it for a better answer.

[@JamesDBuzzard]

You should get terminal blocks instead of using the battery posts so much. Great little upgrade my man!

[@ExtremeDailyDrivers]

Good idea! Thanks for watching!

[@japawaiian]

No fuse on the Alt>Bat wire???

[@ExtremeDailyDrivers]

No fires yet!

[@kenwilson7754]

Did the 3/8 ends on the wires fit good on all places you mounted

[@ExtremeDailyDrivers]

Yep

[@johnathancrumm]

So getting this kit

[@ExtremeDailyDrivers]

It's now $25!!!

[@Aznmnce3]

What strut bar are you using?

[@ExtremeDailyDrivers]

Hotchkis

[@alfredorodriguez3413]

Did you left all the stock wires power and ground still connected as regular to the battery

[@ExtremeDailyDrivers]

Yes! They remain.

[@devinlacefield7538]

Question, why wouldn't you want the wire from the alternator to the positive on the battery to be as short as possible? You'll get the least amount of resistance.

[@ExtremeDailyDrivers]

As mentioned in the video, you can do it that way. It's your car, do it any way you want. Thanks for watching.

[@ottallman]

With the gauge he's running that distance is fine.

[@devinlacefield7538]

@@ottallman oh I know it's not a problem, the heat loss will be minimal, won't notice a decrease in fuel efficiency.

[@Texasmetalmusic]

Wonder if this would work on a gen2 Prius ?

[@ExtremeDailyDrivers]

It should work on any car. However, I believe your battery is in the trunk, which would make this very difficult on a Prius. Good luck!

[@Texasmetalmusic]

@@ExtremeDailyDrivers also if correct there is no alternator either

[@ExtremeDailyDrivers]

I think there is still an alternator. That battery still needs to be charged by something.

[@Texasmetalmusic]

@@ExtremeDailyDrivers correct on the charge but it has a generator since it runs a 220 to a converter to run 110 to recharge the amg battery. A whole different thing then a normal car. But also appreciate the responses man also looking to redo my 2.0 Scion had saved it from a tow yard that I work at.

[@devinsmith861]

Nice upgrade I need this... I have a JL audio 900/5 with jl audio C1 and a jl audio 10tw1 at 4ohms and its a small decent system but my lights dim time to time Crutchfield is a good website to get amps and speakers they help with installation instructions and make it easy to upgrade your sound I also put noico sound deadener from Amazon helps with all the rattles the Box has I bought two boxes of 80mil 36sq feet so it was 72sq feet to do all the doors trunk and the floor and its inexpensive

[@ExtremeDailyDrivers]

Crutchfield is awesome. They are a little pricey, but usually include great directions.

[@devinsmith861]

Yeah they can be but I like there customer service so I keep going back haha

[@ExtremeDailyDrivers]

Their customer service is awesome.

[@UnkindPenguin71]

DUDE HOW DID YOU GET YOUR ENGINE BAY SO CLEAN

[@ExtremeDailyDrivers]

kzbin.info/www/bejne/eqvPn4aAgs1og8k Make sure you sub so you never miss a video! See you next week!

[@bartmormino907]

Tried to find the kit on Amazon but it did not show it.

[@ExtremeDailyDrivers]

Links for everything are in the description box. Thanks for watching.

[@Hvaughnster]

were did u get the sway bar strut mount thing above the motor ?

[@chrisfernandez6840]

Hey bro can I do this on my 2nd gen 2011 scion xB ?

[@ExtremeDailyDrivers]

You can do it to any car.

[@bentenxl]

Hey! where did you get your alternator? looking to upgrade my alternator in my 05 XA!

[@ExtremeDailyDrivers]

O'reilly's. I did a video on it. kzbin.info/www/bejne/iYeWhYt4rbB5jrc

[@jb9042]

Is it okay to ground the battery and motor while i wait on the power wire. Also where exactly did you bolt the ground to the motor?

[@ExtremeDailyDrivers]

Just wait until you have everything to complete the install. The ground to the motor is in the factory location.

[@jb9042]

@@ExtremeDailyDrivers this is my 1st time owning a scion xb so sorry if I'm asking to may questions. Is the factory where it looks like I can add a bolt?

[@ExtremeDailyDrivers]

No, it's where the factory ground wire already exists.

[@jb9042]

@@ExtremeDailyDrivers thanks man keep up the vids bro, I'm learning alot about these cars and how it's easy to work on.

[@jb9042]

Can you point me to the exact spot I'm still having trouble finding it thanks.

[@jeffreygatchalian6617]

Did you ever had problem on ac I heard ac compressor on 1st gen is bad design

[@ExtremeDailyDrivers]

It's not a bad design. I did replace mine because the previous owner removed all of the fender guards. As a result, all debris got kicked up right into the compressor. Thanks for watching.

[@stuartstenhouse5290]

Been meaning to ask what size wheel and tire are on your box ? Thanks

[@ExtremeDailyDrivers]

15x8 205/50/15 Thanks for watching.

[@stuartstenhouse5290]

@@ExtremeDailyDrivers thanks

[@bobriceburner]

Does anyone have a suggestion for a better big three kit than the one that was posted here? Thanks.

[@ExtremeDailyDrivers]

What's wrong with the one posted in the video?

[@bobriceburner]

They look cheap. I question the quality of the copper. This alternator/big 3 is for my Audio system upgrade

[@ExtremeDailyDrivers]

It's not cheap. Read the reviews on Amazon. They worked perfectly for me. If you want to spend more, be my guest, but I doubt you will see a noticeable increase. It's your car, do whatever you feel is right.

[@bobriceburner]

@@ExtremeDailyDrivers OK I got my electrical upgrade parts together and I should have time on Monday to install. I am doing a PowerBastards 200amp Alternator and a big 3 cable upgrade with tricked out battery terminals.

[@erlhendrichcaoile1463]

Is it okay not to add fuse for the power wire?

[@ExtremeDailyDrivers]

I didn't.

[@erlhendrichcaoile1463]

@@ExtremeDailyDrivers is it safe?

[@ExtremeDailyDrivers]

My car hasn't burned to the ground yet! It's your car, add a fuse if it helps you sleep better at night.

[@box_boi_howard]

What’s going on brother. Just wanted to say huge fan of Toaster Tuesday. It has definitely been encouraging me to put a lot of more work into my box as well. I’m actually putting the system in 2- 10in subs with 500watt amp, as well as an amp for all my speakers and deck. I’ve been reading in the comments about how using 1/0 instead of the big there kit would be better. What do you suggest?

[@ExtremeDailyDrivers]

Would it be better? Technically, yes. Is it necessary? Absolutely not. Especially for what I'm going to be running. If you want to install 4 1000 watt amps powering 4 12's, then I would upgrade to 0/1 gauge. Otherwise, what I did is fine and still working great. Thanks for watching!

[@box_boi_howard]

Ok sounds good. Because I have the normal size battery as well as putting in a capacitor. I don’t plan on going any bigger in size on the system. Appreciate the help the brotha!. Ive been doing a lot of upgrades to xb as well. Can’t wait to share it with the BOXFAM

[@box_boi_howard]

Ultimately how many grounda should I have connected to the battery after doing the big three??

[@ExtremeDailyDrivers]

The same ones that you had when you started plus an additional ground. Thanks for watching.

[@box_boi_howard]

I had two when I started but they were messed up. One was to the transmission and one to the frame. So did the big three and replaced the original ground to the frame. That’s that’s to ground to the frame and one to the engine. Do I still need the one goin to the transmission??

[@eripe9535]

i've got a question for you about honda prelude gen 3. Does it have much space at rear seat? Could an adult sit at rear seat without a problem?

[@ExtremeDailyDrivers]

Yes, but only if a child is sitting in the front.

[@eripe9535]

@@ExtremeDailyDrivers oh ok, thx for the answer

[@MrDaniel1223]

I would go with a bigger wire such as 1/0 or 0 gauge wire or bigger. But other then that great video

[@ExtremeDailyDrivers]

I would agree, but for what I have planned it's not necessary. Thanks for watching!

[@tinygunner4703]

Is there a video explains why people do this mod?

[@ExtremeDailyDrivers]

Is there a video that explains why people comment on videos they don't watch?

[@pistolpeteluciano6]

I was wondering if you've installed a plug-in power boost computer. I don't know what I am trying to say exactly. Hope you know what i mean.

[@ExtremeDailyDrivers]

I don't. And I didn't. Lol.

[@pistolpeteluciano6]

@@ExtremeDailyDrivers found what i ment, performance chips & programmers

[@ExtremeDailyDrivers]

No. There aren't really any options for the xB, unless you with a stand alone ECU.

[@kirbs7136]

What battery are you using?

[@ExtremeDailyDrivers]

One for a Yaris. Check out my custom intake video for more info.

[@andrewlloyd9454]

Take a old pair of bolt cutters and grind them out to what ever you want. Easy

[@peteciurczak5644]

Silly question? Why is this important? What happens to the old wires or are they not there? Thank you.

[@ExtremeDailyDrivers]

They stay there. You don't mess with them. You just add these.

[@gottatinker3363]

i totally get "the big 3", but why are you running two dedicated aftermarket cables from battery Neg to chassis? (usually factory cable Plus one dedicated chassis ground is adequate......)

[@ExtremeDailyDrivers]

I have a unique set up. I'm running a smaller battery because of my intake and I had to reroute things to make it all work. While doing so, I upgraded the stock wiring.

[@georgealonsojr5530]

That was my next project

[@ExtremeDailyDrivers]

Perfect timing!

[@JakeDevGames]

Noob question. Never heard of a big 3 upgrade and you said at the end of the vid your volts were higher than normal. What exactly does higher volts mean for the xB??

[@ExtremeDailyDrivers]

I should have done a better job explaining it; The Big 3 ensure that your electrical system is working as efficiently as possible. Since I am running a smaller battery and have recently replaced my alternator, I want to make sure that the electrical system stays strong. I will also be installing a amp and sub in the future, which will draw more power from the electrical system. I hope that answers your questions. Thanks for watching!

[@gottatinker3363]

@@ExtremeDailyDrivers will also help to Minimize "Headlight dimming" during serious bass hits!

[@JakeDevGames]

Extreme Daily Drivers Thanks for the reply! Makes sense now. Great toaster content as always :)

[@dmont1781]

Another noob question.... so this helps with the a sub and amp?

[@ExtremeDailyDrivers]

Absolutely.

[@calibomber209]

Time to throw 3 jl 8w7 and 2 xd 600/1 or < .

[@ExtremeDailyDrivers]

I don't know about all that, but yes an amp is coming.

[@calibomber209]

Extreme Daily Drivers your a sundown guy? Jk can’t wait for that video.

[@ronnydisalvo80]

Vise grips a lighter and a scissor..got 17ft of.0 gauge for 22 bucks.with connectors and all..

[@JosephTrombetta]

Gotcha on the like. Dope video. Just did mine. Thinking about doing the same to the starter. Anyone done this? If yes, worth it?

[@ExtremeDailyDrivers]

I don't believe that will help much.

[@PLURRAVERS]

I cannot find a strut tower for my Scion... Someone please link me

[@ExtremeDailyDrivers]

Gotta learn how to search.

[@PLURRAVERS]

@@ExtremeDailyDrivers i can't wait to show the world my Scion ... But it just feels nakey without dc strut tower 😢