How to Install the e-RIDES Veteran Lynx pedal and Lowering Kit

This Is the installation video for the e-RIDES Veteran Lynx Pedal and the Lowering kit. The Lowering kit improves high speed stability on the Veteran Lynx.
The e-RIDES Lynx pedal now comes with the Friction pedal mechanism.
e-RIDES.US 🇺🇸
Lynx Lowering Kit: e-rides.us/product/veteran-ly...
Lynx Pedal: e-rides.us/product/e-rides-ve...
Lynx Pedal Iron man: e-rides.us/product/e-rides-ve...
e-RIDES.com
Lynx Lowering Kit: e-rides.com/product/veteran-l...
Lynx Pedal: e-rides.com/product/e-rides-v...
Lynx pedal Iran man: e-rides.com/product/e-rides-v...
e-RIDES.EU
Lynx lowering kit: e-rides.com/eu/product/vetera...
Pedal: e-rides.com/eu/product/e-ride...

[@AfeezKayeRIDES]

This Is the installation video for the e-RIDES Veteran Lynx Pedal and the Lowering kit. The Lowering kit improves high speed stability on the Veteran Lynx. The e-RIDES Lynx pedal now comes with the Friction pedal mechanism. e-RIDES.US 🇺🇸 Lynx Lowering Kit: e-rides.us/product/veteran-ly... Lynx Pedal: e-rides.us/product/e-rides-ve... Lynx Pedal Iron man: e-rides.us/product/e-rides-ve... e-RIDES.com Lynx Lowering Kit: e-rides.com/product/veteran-l... Lynx Pedal: e-rides.com/product/e-rides-v... Lynx pedal Iran man: e-rides.com/product/e-rides-v... e-RIDES.EU Lynx lowering kit: e-rides.com/eu/product/vetera... Pedal: e-rides.com/eu/product/e-ride...

[@guimarotta]

Please can you make a video showing the height difference with and without the support and also, if possible, the height difference between other wheels such as the Patton, Extreme, etc...

[@WalrusHal]

The cutaway on the rod goes beneath the small grub screw on the left side of the pedal, and the large grub screw on the right side. So a large and a small grub screw don't get used at all...

[@BigORider]

That’s the answer I was searching for

[@SamClegg]

I'm little confused. I though the cutout on the pedal was designed so that the it could close fully even with the jump-pad/toe-pad installed? If that is the case aren't you installing them backwards here?

[@JonahHax]

I see so many people getting this wrong :-D Probably the same people that install their SurRon seat the wrong way also.

[@jtm94]

Some people want the wider front for their toes. The cutout is for pads but sometimes comfort > convenience

[@mcfly_ev]

Are they more angled than the stock? The pedal angle looks steeper.

[@hi84690]

Do u have video of how to install the gear kit

[@AfeezKayeRIDES]

We advise using the Gear kit for Patton. Friction set for Lynx. Any more questions feel free to email us directly

[@bookmark2846]

Will the pedals scrape if you do a sharp turn? I'd like to see a video of it to get an idea of how much lowering the pedal will affect its ability to turn without scraping.

[@wheeliam360]

Please can you make a lowering kit for Sherman S 👍

[@ricknewhouse5812]

Is there going to be an associated kit to lower the toe hook along with the pedal?

[@wheelydope]

I noticed you didn’t use loctite. Any particular reason?

[@MrDarkBenjamin]

Whether is or will be available for Patton?

[@AfeezKayeRIDES]

Yes

[@boblatkey7160]

Clunky design, nice pedal though. Stripped screw on the pedal tensioning plate right out of the box. 😢

[@AfeezKayeRIDES]

@@boblatkey7160 sorry about that, that most definitely is a production issue. The installation of the pedals is similar to the installation of the Lynx factory pedal. Regarding the screw have you sent an email to the team?

[@boblatkey7160]

@@AfeezKayeRIDES OK thank you for responding! I'm good. I'm fairly handy and got it worked out nicely. I'm just going to tap the stripped screw and put in one that is just a tiny bit bigger. It's all good. Took my first long ride yesterday and I really do like the pedals and I love the raised elevation on the front and the back, my feet definitely have more pressure evenly distributed across the pedals.

[@AfeezKayeRIDES]

@@boblatkey7160Amazing.. Glad you sorted it. we are always here to help.. have fun 😊👍