How to Install the No-Pest Vent on Wood or Vinyl Siding

  Рет қаралды 94,602

No-Pest Vent

No-Pest Vent

5 жыл бұрын

How to Install the No-Pest Vent on Wood or Vinyl Siding
-Save money with increased airflow and decreased drafts
-Keep out birds, insects, rodents, scorpions and more!
-Safer than traditional vents with reduced lint-build-up
-Installs in minutes, cleans in seconds
-Reduced clothes drying time

Пікірлер: 11
@davejohn255
@davejohn255 3 жыл бұрын
Thanks
@jferggi4770
@jferggi4770 11 ай бұрын
The sheet metal duct was delivered all bent up as well as the box it came in. Can not keep it together. Wondering if I can use the old duct that's already there?
@rkgsd
@rkgsd 8 ай бұрын
If it fits over the old duct, there's no need for the tube. Personally I would've demanded an exchange since the package and contents were abused.
@idyh8391
@idyh8391 2 жыл бұрын
how do you keep the flap from banging in the wind?
@p-tecproductsinc.3513
@p-tecproductsinc.3513 2 жыл бұрын
It may be a detail related to the install such as not being slightly inward at the top to nor allow the magnet to attach to the bearing. Or the attachment screws are over tightened not allowing door seal against the mount. It could also be caused by air infiltrating the home at another location which creates an internal pressure, and the No Pest Vent becomes the relieve valve, then the gust of wind catches the door and lets quickly close again. You can give us a call if you have any addition questions, and we will try to help you. Thank You, Kelly
@lkw5699
@lkw5699 Жыл бұрын
I hate the cheap sheetmetal duct. It came apart never regained its original shape. Rigid duct for me
@jaimethibodeaux6844
@jaimethibodeaux6844 4 ай бұрын
You skipped over the biggest issue I have -removal of the siding without damaging
@no-pestvent4897
@no-pestvent4897 4 ай бұрын
Hey Jaime, if you are going over existing siding with the wide mount vent cover, removing siding is not necessary. If its an existing vent simply reuse the hole that is already there, if its a new vent being added just drill through the siding and wall with a 4 inch hole saw. Then seal around the dryer vent with silicone after its installed. Hope this helps with any confusion!
@jaimethibodeaux6844
@jaimethibodeaux6844 4 ай бұрын
@@no-pestvent4897 we were thinking silicone too… thanks!
@akbychoice
@akbychoice 2 ай бұрын
Holesaw used in reverse on plastic so it doesn’t grab and destroy the siding.
Surprising Method to Fix Siding Cracks Fast
4:51
Home Rapid Repair
Рет қаралды 233 М.
Идеально повторил? Хотите вторую часть?
00:13
⚡️КАН АНДРЕЙ⚡️
Рет қаралды 12 МЛН
Little brothers couldn't stay calm when they noticed a bin lorry #shorts
00:32
Fabiosa Best Lifehacks
Рет қаралды 4,9 МЛН
How to Vent a Clothes Dryer | Ask This Old House
7:29
This Old House
Рет қаралды 1,1 МЛН
Dryer Vent Cover Installation
7:49
DIYNorth
Рет қаралды 63 М.
How to install a dryer vent in the brick wall
8:29
CreativeProcessDIY
Рет қаралды 36 М.
#Siding a House: Tips to Install like a PRO
32:07
RR Buildings
Рет қаралды 355 М.
Install Microwave Wall Vent - vinyl siding
12:58
Daren
Рет қаралды 76 М.
Simple Trick to Clean Out a Clogged Dryer Vent or Duct Work.
7:26
Mr Fixit
Рет қаралды 1,4 МЛН
How to Replace a Dryer Vent (FAST!!!)
10:27
Home Repair Tutor
Рет қаралды 83 М.