How to Install Dryer Vent and Make a Hole on Vinyl Siding Step by Step

Install dryer vent through wall siding - A new dryer vent should be installed on a vinyl siding. The challenge is to cut a hole (an 4 inch hole) without damage the vinyl. The video shows how to drill 4 inches hole using an hole saw and how to install a Dryer Vent properly using silicon to caulk and foam to seal the hole .
4 inch hole saw = amzn.to/341WsnU or amzn.to/3i0hBE9
Flex Air Aluminum Foil Ducting Dryer Vent = amzn.to/30bopZc
Dryer Vent = amzn.to/2HtkNve or amzn.to/306XXjF
Silicon = amzn.to/33ZfThb
Pro Caulk = amzn.to/2RWqfca
Ryobi Drill = amzn.to/309djnS
Foam Sealer = amzn.to/3p4cM0C or amzn.to/3sLloMe
Amazon Deals:
Try Amazon Prime 30 days for free = amzn.to/2JMWaLe
Create Amazon Business account = amzn.to/3mLSyYt
Joint Amazon Prime Watch Thousends Of Movies and TV = amzn.to/33NfsHD
Try Personal Shopper Wardrobe amzn.to/2VClfv9

[@josephk9182]

4 inch hole saw =

[@NathanHarrison7]

in 1 million years I never would’ve thought to go on reverse. I would’ve completely destroyed my vinyl. Thank you for sharing your tip with us. Subscribed.

[@jeremybuchanan4759]

reverse to start cut in thin material ... brilliant! exactly why I was looking for videos - to avoid tearing the vinyl siding edges at the cut.

[@joshblount133]

Thanks for making this video. I followed it pretty much step by step and everything worked great... The tip about using the drill in reverse was a lifesaver and kept me from cracking my new siding... Thanks again.

[@A10TOES]

My son changed my dryer vent & using reverse to cut the hole for the vent went perfect.

[@darnpottery5870]

Thank you so much for making this video. The reverse cutting is a million dollar tip!!!

[@stephenschultz8504]

After watching Your video, And the Critic's comments, I have enough information to tackle this project. Thanks For Posting!!

[@jayc3110]

Nice Video. Clearly explained. Was not aware of your 'trick' for cutting through thin or soft materials. - "Reverse the drill' when you start. The summary/recap at the end was a nice touch.

[@lmac36]

Thanks for posting and the tip about running it backwards so not to break the siding! 👍👍

[@OriginalPatina]

Great video. It helped me install a dryer vent & I never did it before.

[@silentstormstudios]

Thank you for this video. It helped me greatly in installing a vent yesterday.

[@wearethepeoplewhostandup2144]

Joseph! Thank you SO much for sharing your expertise! LOVE the tips about when to use hole saw in reverse! I'm a bit crippled, but really need washer & dryer on main level before I have surgery. Wondered if I could do the vent myself, and your video gave me the DETAILED instructions I needed to take this task on myself! I watched other videos first--this other guy put a 6" crack in his vinyl siding because he didn't know to cut it in reverse! He said "I'll do...something...about that later"...! I'm so glad I found your video. You really helped me! Thank you!

[@tammydavis9792]

Exactly what I was Looking for ! Thank you sooooo much for your video !!!

[@victorvek5227]

Gotta love that flush fit.

[@Pro1er]

One important detail that you left out, (or I didn't catch it), is that you have to be aware of any studs within the aria of the hole you plan to cut in the wall. You don't want to start drilling in the wall and find out that there is a wall stud on the outer end of the hole saw.

[@Dave-eu1fc]

The cutouts on the side of the hole saw are for prying the plug out of the bit with a flat screwdriver

[@Diozark]

You Should use a Siding Block So you get a flush mount

[@keylandcurtis2042]

very helpful thanks

[@ContinuousRefinement]

Good tip about using the drill in reverse to cut vinyl and drywall.

[@Cecilbags]

Awesome vid. Thank you for the knowledge, brother.